Hey there thanks for the video when i plug it in the pc, its not detected by Velocidrone nor Steam i created the new model as suggested but nothing any suggestion? also does the controller need to be turned on when connecting to the pc?
Hi i want to get the 3.5mm connect to PC and make signals map to Epic unreal engine for further development. but im stuck with my PC showing "Audio signal is OK but cannot feed position to vJoy Device" any ideas how to tune it? many thanks!!
hi,, the throttle can we reverse (LEFT) is it possible? im using also RADIOMASTER POCKET.. where my left stick is my YAW+THROTTLE and right stick is my ROLL+PITCH
hi, thanks for the video. when i connect the controller to my pc, it detects it but i get a code 28 (driver problem). is this linked to the fact that i don't have a battery in it? Is it possible to do this without a battery by connecting the controller's power supply by cable? (via the usb-c port on the bottom of the controller). thanks in advance!
Connected Pocket to PS5 for DRL simulator. Gimbles callibrated and work ok. But the function buttons do not work. Looks like I need to configure the model. Once I managed to get one of the buttons working (use it to restart the mission), but then I changed the settings and forget ( Anyone knows the correct way to do it?
Hi do you know flight simulator for RC Plane that I can use for my radiomaster pocket ELRS? I have tried Clear View simulator but I cannot control using Radiomaster Pocket
Hi Rahadyan, it will work with Clear View I have just tested my Pocket with the flight simulator. Check all you settings again and make sure your computer is detecting your radio, does it make the two tone noise when plugging in? Are you plugging into the top USB C of the Pocket and selecting joystick option on the radio?
@@the-happy-RC-flyer Hi thank you so much for your reply I will try it again Previously I connect my remote using USB C in the front The Clear View Controll setting detect my Radiomaster remote Then, I do calibration by moving my controller The X,Y,Z axis in the Clear view are moving But, after I click ok then trying to move the control again there is the CV Joint didnt move
This video should help you. I think you have a driver problem please see link Go to 1 minute 47 seconds Driver Problem Solved ua-cam.com/video/_vbl1fZM2Dg/v-deo.html
Curry Kitten I would recommend Curry Kittens free flight simulator to get started with: Curry Kitten Flight Simulator Links: github.com/CurryKitten/CurryKitten-Sim/releases
Let’s get the niceties over, Hi dfobox. If the other channels are working it is your channel mapping. Go into the flight simulator and have a look at the controller set up and change the channels.
Yes the radio needs to be turned on. Is your computer detecting your radio? If not You may have a Driver Problem. This video should help you. I think you have a driver problem please see link Go to 1 minute 47 seconds Driver Problem Solved ua-cam.com/video/_vbl1fZM2Dg/v-deo.html
Hi, do you need to have batteries in the controller to fly the simulator?
Thanks
Yes you do.
Yeah even if you keep the charger attached it wont turn on
Hey there
thanks for the video
when i plug it in the pc, its not detected by Velocidrone nor Steam
i created the new model as suggested but nothing
any suggestion?
also does the controller need to be turned on when connecting to the pc?
How do you set up a new model
In the model select window click enter on a spare model number.
I can't seem to find a way to set an arm/disarm controller button in Liftoff.
I do not think you can.
Hi i want to get the 3.5mm connect to PC and make signals map to Epic unreal engine for further development. but im stuck with my PC showing "Audio signal is OK but cannot feed position to vJoy Device" any ideas how to tune it? many thanks!!
Sorry Wilson cannot assist you with this problem.
hi,, the throttle can we reverse (LEFT) is it possible? im using also RADIOMASTER POCKET.. where my left stick is my YAW+THROTTLE and right stick is my ROLL+PITCH
Your radio is set up for Mode 2. I change my radios to Mode 1 throttle right.
hi, thanks for the video. when i connect the controller to my pc, it detects it but i get a code 28 (driver problem). is this linked to the fact that i don't have a battery in it? Is it possible to do this without a battery by connecting the controller's power supply by cable? (via the usb-c port on the bottom of the controller). thanks in advance!
You will need batteries in the radio.
When simulator ask me to calibrate input can't be seen from controller i give up
Is your computer detecting your radio?
Connected Pocket to PS5 for DRL simulator. Gimbles callibrated and work ok. But the function buttons do not work. Looks like I need to configure the model. Once I managed to get one of the buttons working (use it to restart the mission), but then I changed the settings and forget ( Anyone knows the correct way to do it?
I do not have the DRL simulator but you need to look at the radio configuration options in DRL.
Hi Radiomaster pocket in connecting to liftoff simulator but not working 😢
Help me plz
If you have programmed everything ok and is your computer detecting your radio when you plug it in?
Did you get it to work?
You dont need to set up arm?
Not really in a simulator.
Hi do you know flight simulator for RC Plane that I can use for my radiomaster pocket ELRS?
I have tried Clear View simulator but I cannot control using Radiomaster Pocket
Hi Rahadyan, it will work with Clear View I have just tested my Pocket with the flight simulator. Check all you settings again and make sure your computer is detecting your radio, does it make the two tone noise when plugging in? Are you plugging into the top USB C of the Pocket and selecting joystick option on the radio?
@@the-happy-RC-flyer Hi thank you so much for your reply
I will try it again
Previously I connect my remote using USB C in the front
The Clear View Controll setting detect my Radiomaster remote
Then, I do calibration by moving my controller
The X,Y,Z axis in the Clear view are moving
But, after I click ok then trying to move the control again there is the CV Joint didnt move
Could you send a link with the drivers? My PC doesn't detect controller.
This video should help you. I think you have a driver problem please see link
Go to 1 minute 47 seconds
Driver Problem Solved
ua-cam.com/video/_vbl1fZM2Dg/v-deo.html
@@the-happy-RC-flyer I've already solved this problem. Simply, updated windows and frankly pc detects controller.
Hola! Sirve la emisora para simulador?
If I understand correctly, you will need flight simulator software or online service.
@@the-happy-RC-flyer flight simulator, but free version
Curry Kitten
I would recommend Curry Kittens free flight simulator to get started with:
Curry Kitten Flight Simulator Links:
github.com/CurryKitten/CurryKitten-Sim/releases
Thank you so much!
I connected to the computer and the o my thing that popped up was the saved file then nothing happen
I would take the nsx be the a8
Weill this controller work on Mac?
Yes it should.
Hi think I need a driver not recognising my pocket
What are you having problems with? Is your computer detecting your radio.
pitch and roll don't work, how do I fix that?
Let’s get the niceties over, Hi dfobox. If the other channels are working it is your channel mapping. Go into the flight simulator and have a look at the controller set up and change the channels.
it worked fine on another computer though
@@dfoboxthen the settings on the second computers flight Simulator need to be checked.
Yes the radio needs to be turned on. Is your computer detecting your radio? If not You may have a Driver Problem.
This video should help you. I think you have a driver problem please see link
Go to 1 minute 47 seconds
Driver Problem Solved
ua-cam.com/video/_vbl1fZM2Dg/v-deo.html
Promo'SM
Hi
RM Pocket is connected in Liftoff Simulator and pop-up 👍 but
Not working/ reacting
Plz help me
If you are sure the radio is connecting to the computer and showing in Liftoff, try manually mapping and doing the calibration process in Liftoff.