bhai tu great hai yr..... you are amazing.... mere pass jb ye phone aayeya tb main isse apni maa ki tarh pyar se rakhunga...... when this phone is come on my hand than i care this phone like my mother...... aur bhai tum ne toh iski puri what laga di..... khol tu rahe the aur aanshu mera aa raha tha..... lakin bhai gjb ka tellent hai aap main..... super
Man, you are really good! It would be great to see if you consider posting phone reviews with detailed features as well as teardown with technology a company uses (how and why), somewhat like Dave2D does in his laptop reviews. And thanks for the amazing video!
Nice teardown. Are you gonna eventually do a review of this phone? Also, what would you do if a screw was to difficult to remove because it is too damaged?
Thank you. I may or may not do a review on it, got another video or two I got to do first. Also a lot of reviews out there already on this phone so I will see. As for stripped screws, best thing to do is use a drill bit that fits into the screw and drill into it a bit to break the head off, then when you remove the part it was holding down, you can use pliers to twist off the screw. Hope this helps :)
Can u go into details and links for your Xbox one water cool. It’s realy heard to fallow it with barley any detail. It might be easy for u but go more in detail about it like a step by step Guide. Show us pleas.
The xbox one was customized with hardware at a few different places so it isn't really doable for everyone. For example we had the housing customized somewhere local to be able to fit the radiator in etc. If you just want to water cool it and leave the whole chassis open its possible but again everything from the screw mounts and such we modified so not really worth someone duplicating. We just did it back then as a fun project but yep. All you need is a closed loop like one of those water cool kits and you can use the mounting brackets it comes with along with screws that you will need to get that will be the length you need with washers to tighten down. An AMD bracket would better suit being used with the xbox one (which usually comes with the water cooling kits like the h70 or h80 etc.). But again your left with the wiring for the pump and fan etc, just not worth doing since I had one of the guys more familiar with electrical handle that portion. So yep.
PBKreviews Two quick question. How did you power the fan was it plug-in play on the stock fan socket of the motherboard? Splicing into the Blu-ray power was that to power the pump?
@@greedx7602 Ya if i am not mistaken its been a long time but this other video we had done gives you a more of a break down so this should help you on that. At the 1:47 mark you will see the text explaining what was done. ua-cam.com/video/_koPzrfHf8Q/v-deo.html
@@PBKreviews oh I see! The external body of the 48mp sensor looks like the OIS sensors of Nokia 8.1 or Samsung Note! Anyway, I will be waiting for the teardown of Nokia 9 pure view!!
Not sure what you mean by copy board, but the board itself has gold contacts which touch the frame at certain points to give/gain signal from the antennas on the frame of the phone. Make sure the board is seated and installed properly and its the correct board for the phone. Also make sure the black wire cable is connected properly. Its also possible the board you have might be defective or if its an aftermarket one, might not be well made and that might be the reason the issue is there.
@@PBKreviews thanks for reply, the board is a cheaper one (probably from china). Original pcb is little more expensive, can it be the board that is not made for my country? frequency spectrum difference type of issue. I observed that there is diffrence internet speed for phones bought from abroad when campared to my own country. Or It might be loose contact issue, the service boy give me the phone after repair as wrapped in three rubber bands. When i pinch my phone i see the back cover is getting pressed. Any way can i change the mic alone not by replacing the entire pcb?
@@sayyidsahal1996 Ya you can replace the speaker, you don't need to replace the charger port board just to replace the speaker. Also it is possible the board you got has antenna contacts in different sections or not the exact fit for the phone that would cause those issues.
@@sayyidsahal1996 no because its soldered onto that board and unless you have good soldering skills and a replacement mic, I don't think it would be possible. I personally would not be able to do it.
lol, not sure the mm just find them perfect for not damaging the frame or phone, They are thin enough and sturdy as well to do the job better than most pry tools.
Have you picked the winner for the good guy doll yet? Every night since the giveaway started I’ve been sitting on the edge of my seat crying in hopes that I win.
@@zigmar2 Yes I am aware of that, but some do so I tested it with verizon to make sure. But I did check with ATT sim last night worked 100% so thats good. Since some international phones do not work on gsm networks in usa either.
This is surprisingly interesting. I came for the good guy, and stayed for the phones. I found a new favorite UA-camr.
:) Thanks, glad you enjoy the videos!
bhai tu great hai yr..... you are amazing.... mere pass jb ye phone aayeya tb main isse apni maa ki tarh pyar se rakhunga...... when this phone is come on my hand than i care this phone like my mother...... aur bhai tum ne toh iski puri what laga di..... khol tu rahe the aur aanshu mera aa raha tha..... lakin bhai gjb ka tellent hai aap main..... super
Im in tears seing this thing apart 🙃
Really clean and clear teardown!
Thanks! :)
You are my second favourite UA-camr after JerryRigEverything
Man, you are really good! It would be great to see if you consider posting phone reviews with detailed features as well as teardown with technology a company uses (how and why), somewhat like Dave2D does in his laptop reviews. And thanks for the amazing video!
Thank you! Will look into doing more reviews of the phones in the future as well. Thanks for the input.
Nice teardown. Are you gonna eventually do a review of this phone?
Also, what would you do if a screw was to difficult to remove because it is too damaged?
Thank you. I may or may not do a review on it, got another video or two I got to do first. Also a lot of reviews out there already on this phone so I will see. As for stripped screws, best thing to do is use a drill bit that fits into the screw and drill into it a bit to break the head off, then when you remove the part it was holding down, you can use pliers to twist off the screw. Hope this helps :)
Can u go into details and links for your Xbox one water cool. It’s realy heard to fallow it with barley any detail. It might be easy for u but go more in detail about it like a step by step Guide. Show us pleas.
The xbox one was customized with hardware at a few different places so it isn't really doable for everyone. For example we had the housing customized somewhere local to be able to fit the radiator in etc. If you just want to water cool it and leave the whole chassis open its possible but again everything from the screw mounts and such we modified so not really worth someone duplicating. We just did it back then as a fun project but yep. All you need is a closed loop like one of those water cool kits and you can use the mounting brackets it comes with along with screws that you will need to get that will be the length you need with washers to tighten down. An AMD bracket would better suit being used with the xbox one (which usually comes with the water cooling kits like the h70 or h80 etc.). But again your left with the wiring for the pump and fan etc, just not worth doing since I had one of the guys more familiar with electrical handle that portion. So yep.
PBKreviews Two quick question. How did you power the fan was it plug-in play on the stock fan socket of the motherboard? Splicing into the Blu-ray power was that to power the pump?
@@greedx7602 Ya if i am not mistaken its been a long time but this other video we had done gives you a more of a break down so this should help you on that. At the 1:47 mark you will see the text explaining what was done. ua-cam.com/video/_koPzrfHf8Q/v-deo.html
Could you let me know in which site or shop can buy the back cover of my Nokia X71 ??
It is hard to see a teardown video without hearing "deeper grooves".
You big fan of Zac?
Is it ever going to be released Globally?
Beautiful nokia
Why there was no thermal paste between CPU and the Frame ?
Amazing .. super
Love ur accent though 😍
Is the main camera sensor is 48Mp & have Optical Image Stabilization??
Yes 48MP but the camera was fixed and did not move so no image stabilization from what I could tell
@@PBKreviews oh I see!
The external body of the 48mp sensor looks like the OIS sensors of Nokia 8.1 or Samsung Note!
Anyway, I will be waiting for the teardown of Nokia 9 pure view!!
@@SOURADEEPBISWAS Already did a teardown of the Nokia 9 Pureview :)
@@PBKreviews ok I'll check that out!
Plz share yu unicorn 5530 display change vdo
I replaced nokia 8.1 mic board(with a copy board), now my network range is low, what will be the problem?
Not sure what you mean by copy board, but the board itself has gold contacts which touch the frame at certain points to give/gain signal from the antennas on the frame of the phone. Make sure the board is seated and installed properly and its the correct board for the phone. Also make sure the black wire cable is connected properly. Its also possible the board you have might be defective or if its an aftermarket one, might not be well made and that might be the reason the issue is there.
@@PBKreviews thanks for reply, the board is a cheaper one (probably from china). Original pcb is little more expensive, can it be the board that is not made for my country? frequency spectrum difference type of issue.
I observed that there is diffrence internet speed for phones bought from abroad when campared to my own country.
Or
It might be loose contact issue, the service boy give me the phone after repair as wrapped in three rubber bands.
When i pinch my phone i see the back cover is getting pressed.
Any way can i change the mic alone not by replacing the entire pcb?
@@sayyidsahal1996 Ya you can replace the speaker, you don't need to replace the charger port board just to replace the speaker. Also it is possible the board you got has antenna contacts in different sections or not the exact fit for the phone that would cause those issues.
@@PBKreviews *edit : can i change the "mic" alone not by replacing the entire pcb?
@@sayyidsahal1996 no because its soldered onto that board and unless you have good soldering skills and a replacement mic, I don't think it would be possible. I personally would not be able to do it.
can anyone tell me the video quality of this phone? curious if its good for vlogging kinda thing.
waw guitar striker to open a nokia .. :P how much mm #striker??
lol, not sure the mm just find them perfect for not damaging the frame or phone, They are thin enough and sturdy as well to do the job better than most pry tools.
Good Video
После этого работать будет?
Yes I showed it powering on at the end, and phone works fine.
Have you picked the winner for the good guy doll yet? Every night since the giveaway started I’ve been sitting on the edge of my seat crying in hopes that I win.
We are still waiting to get , and you... Btw thanks
your welcome :)
Very nice.
It is not sold in Vietnam
this would be the perfect phone for me but no nfc. so sad ;-; well I guess I will pick with the nokia x7 instead.
Nice phone . Will this phone work in USA ?
Not sure, I tried it with verizon, it didn't work so I will try n see if it works on ATT tomorrow.
@@PBKreviews thanks , please let me know if work with att ...
@@PBKreviews the majority of non-US phones do not work on Verizon and Sprint because most countries do not use CDMA, so most models do not support it.
@@zigmar2 Yes I am aware of that, but some do so I tested it with verizon to make sure. But I did check with ATT sim last night worked 100% so thats good. Since some international phones do not work on gsm networks in usa either.
@@andresmiami031681 Yes checked yesterday, worked 100% with ATT
Too bad what make it so long nubia red magic 3 already unboxing on indonesia. Even realme 3 pro . Just tear down
Same like 6.1 plus
feels like you are tearing my phone. please don't. you are crazy.
Bro
Nokia, x71 tha best
Yes,r, no
做工真差！一颗固定螺丝都没有
Now send this device to me .
Don't break new phone
didn't break it, still works :)
Why are you doing this, at least give to people like me who really needed
Because that's what I do on my channel, take phones apart for people to see how to do it when they need to make repairs on their phones.