@@airsoftgemeinschaftbodensee what a pity. because there are countries with VERY loyal gun laws. And in these countries, airsoft assault rifles are allowed to have up to 150m\s. But it's one thing that the motor can barely charge the M140 spring, and another thing is what the rate of fire will be. If it is lower than that of the base motor from E&L (also on neodymium magnets), then it makes sense to overpay?
Awesome review, just like the more recent rpk one that brought me to your channel. Are there any other upgrades from a stock lkc74mn you would suggest to pair with this new motor? Things like gear, piston etc
Thank you. I installed a JeffTron V3 Processor Unit which replaced the switch unit. But this processor unit is no longer up-to-date. There are new Processor Units on the market. I would recommend you the new "ASCU PRO V3" it's a very solid processor unit without any unnecessary functions which can fail during the game. Furthermore it's very easy to install. The new LCT 18:1 Gears hold up to a M130 Spring, Piston up to a M140-M150 Spring so if you don't want to go higher or significantly more firing rate, I would not replace anything. I will publish a video about my LCT AK74M modifications as soon as we can play again during this shit corona. :)
@@airsoftgemeinschaftbodensee thanks a lot, will look into it! Think my eye caught you somewhere saying you have a lot of forum, blog etc posts before your first english vid. Is that somewhere specific? New lockdown here as well, decided to spend the extra time on getting some knowledge
I just bought the Ares version of this slim motor (i believe LCT is a rebrand) and wanted to say thanks for including english subs, this will help when i install my lct slim rk3 on my ak105 when it arrives. Cheers :)
Good, did you compare it with the real steel grip? I would like to know if it is really as thin as original ones. The thickness of original grips is around 22~23mm.
Ich glaube, der neue Bakelitgriff ist wirklich aus Bakelit, während der alte aus GFK mit Bakelitlook ist. Btw, kann man den Motor in einen angepaßten echten AK- Griff packen?
do you have any idea where can I find LCT motors for AKM in order to fit a more realistic pistol grip? the motor that you inserted had the same size as the other one...I need a much smaller one in order to get my new pistol grip to fit in...
Hi Bro! The lower part of the grip has little bit incorrect shape. For black colour not big deal, easy to complete by file and paint. I do the AEGs from real AK.
unfortunately not yet. the angle at which the grip is positioned is different from the real thing. about 5 degrees difference. theoretically it can be modified, as been done by some russian dudes, but there are no commericial solutions available. even after solving that problem, the real steel grip uses one attachment bolt, whereas the slim grip uses two bolts. you need a very clever solution to these two problems, but it somewhat can be done.
@@airsoftgemeinschaftbodensee Das Ist natürlich sehr geil! Ich hätte ja eigentlich sehr gerne ein Kashtan. Aber die tauchen quasi nie auf... Daher das pk-as an zweiter Stelle
![[3rd LCT INT'L Short film contest] Upgrade](http://i.ytimg.com/vi/W01O-_T6KdA/mqdefault.jpg)
What is your optics at 13:57 ? And nice video man
1P-76 Rakurs and thank you!
thanx for video
13:37 very bad that you did not make rate-of-fire test on M150 spring :(
sry German Gun Law didn't allow full auto over 0,5 Joule
@@airsoftgemeinschaftbodensee what a pity. because there are countries with VERY loyal gun laws. And in these countries, airsoft assault rifles are allowed to have up to 150m\s. But it's one thing that the motor can barely charge the M140 spring, and another thing is what the rate of fire will be. If it is lower than that of the base motor from E&L (also on neodymium magnets), then it makes sense to overpay?
Awesome review, just like the more recent rpk one that brought me to your channel. Are there any other upgrades from a stock lkc74mn you would suggest to pair with this new motor? Things like gear, piston etc
Thank you. I installed a JeffTron V3 Processor Unit which replaced the switch unit. But this processor unit is no longer up-to-date. There are new Processor Units on the market. I would recommend you the new "ASCU PRO V3" it's a very solid processor unit without any unnecessary functions which can fail during the game. Furthermore it's very easy to install. The new LCT 18:1 Gears hold up to a M130 Spring, Piston up to a M140-M150 Spring so if you don't want to go higher or significantly more firing rate, I would not replace anything. I will publish a video about my LCT AK74M modifications as soon as we can play again during this shit corona. :)
@@airsoftgemeinschaftbodensee thanks a lot, will look into it! Think my eye caught you somewhere saying you have a lot of forum, blog etc posts before your first english vid. Is that somewhere specific? New lockdown here as well, decided to spend the extra time on getting some knowledge
@@doomili You'll find me in Red-Alliance Forum under "Stoppelhopser".
Very cool to see another airsofter running a Rakurs Optic !
Hi good review. Do you find the slim motor strong enough for M150? Is your gears short stroked (SSG)? And does the motor sound whiny/loud?
what brushes did you bought when you had to change them?
I just bought the Ares version of this slim motor (i believe LCT is a rebrand) and wanted to say thanks for including english subs, this will help when i install my lct slim rk3 on my ak105 when it arrives. Cheers :)
lct is over ares on power / speed
Hello please do you know if is this kit compatible with e&l ak guns? Thanks!
Hello, yes the black AK74M in this video is a E&L
@@airsoftgemeinschaftbodensee Perfect thank you!
Good, did you compare it with the real steel grip? I would like to know if it is really as thin as original ones. The thickness of original grips is around 22~23mm.
I will compare this the next days
11,8x3,8x2,9 (LxBxT)
@@airsoftgemeinschaftbodensee Thank you!
@@airsoftgemeinschaftbodensee It is almost as thick as the stock AEG grip. Disappointing.
No the stock grip has 3,1-3,2cm
damn i bought the 360 euro version of the lct akm and yours for a 100 more look like a real one just as i wanted 😫
Good vid
Anyone know if the grip (mot motor) is compatible with an Arcturus AT-AK04?
a slim grip won't fit without a slim motor
Ich glaube, der neue Bakelitgriff ist wirklich aus Bakelit, während der alte aus GFK mit Bakelitlook ist.
Btw, kann man den Motor in einen angepaßten echten AK- Griff packen?
do you have any idea where can I find LCT motors for AKM in order to fit a more realistic pistol grip? the motor that you inserted had the same size as the other one...I need a much smaller one in order to get my new pistol grip to fit in...
I bought these LCT Slim Motors at the WGC Shop. There are no thinner motors on the market as I know.
Hi Bro! The lower part of the grip has little bit incorrect shape. For black colour not big deal, easy to complete by file and paint. I do the AEGs from real AK.
Do you have Pictures for me? Sounds interesting
@@airsoftgemeinschaftbodensee very soon I will download short video....
@@eduardshkurin996 thank you!
Can real grips fit onto the slim motor?
I don't think so, maybe if you dremel something but I didn't test it.
unfortunately not yet. the angle at which the grip is positioned is different from the real thing. about 5 degrees difference.
theoretically it can be modified, as been done by some russian dudes, but there are no commericial solutions available.
even after solving that problem, the real steel grip uses one attachment bolt, whereas the slim grip uses two bolts. you need a very clever solution to these two problems, but it somewhat can be done.
Would the lct ak74m be worth 310 euros?
more
@@airsoftgemeinschaftbodensee I just got my tx mig from lct. Works perfektly. Inner barrel wobbles little.
does it works on E&L ak ?
yes it works, the black AK74M at the end is E&L
@@airsoftgemeinschaftbodensee ok tank you so much 👍🏻
Wenn das Visier genau so viel kostet die die Airsoft 😂👌
Bisschen günstiger wars doch, aber ja ^^
@@airsoftgemeinschaftbodensee Ich will ein pk-as für meine.... Aber 400-450€ sind schon ne Ansage. Wobei deins ja wsl ein bisschen günstiger war
@@tolga1cool das Rakurs hat mich 260€ gekostet, hab's günstig auf eBay geschossen.
@@airsoftgemeinschaftbodensee Das Ist natürlich sehr geil! Ich hätte ja eigentlich sehr gerne ein Kashtan. Aber die tauchen quasi nie auf... Daher das pk-as an zweiter Stelle
@@tolga1cool beim PK-AS hat mich die originale Seitenmontage abgeschreckt, man müsste die westliche benutzen damit es auf der Visierlinie sitzt.
torque, nicht torch. 😜 das eine heisst drehmoment, das andere heisst fackel. du baust keinen fackelmotor ein... (außer er raucht ab) 😂