Bill, the Hornby Jinty is a Railroad model. It is simpler mechanically and less detailed than the Bachmann. Its also not DCC ready though your layout is DC and so its less of an issue. The Hornby model will be a lot cheaper as well.
Hi Bill..another great video 👍🏻..I’ve a few Bachmann Jintys and having had a hornby example to I’ve found Bachmann to be a better quality build..although I suppose it’s personal preference really
hi Bill, great video..i ave 2 Triang jinties made in 1967.good solid and reliable and easy to maintain,nowadays Bachmann is leading the way with jinties
I'm kinda new to model railways, maintenance of my locomotive is an area I'm not 100% on yet learning loads from your videos. Thank you for doing these videos Bill
Great video Bill, I would recommend getting the Bachmann version. How about the LMS Maroon Jinty No.16440? There are two left in stock at Olivia's Trains. I have one too.
I have an early Hornby one with a X04 motor, runs like a dream, and a heck of a lot easier to open up for maintenance, only one screw, straight down the chimney.
I have the Bachmann Jinty in early British Railways livery. Sam's Trains did a review a while back listing its many shortcomings. However mine has been super reliable for the past 5 years and I love it to bits.
I'm a big fan of Bachmann's 0-6-0 Chassis that they use for the Jinty and Pannier tanks. I'd go with the Bachmann Jinty personally. Not sure if you'll do DCC at all but the older models without DCC readiness are usually available for good prices.
Hi Bill good interesting video as usual, my favourite jinty is the Hornby SDJR version for the best all rounder, ie looks and good running capability. Cheers Tim Knight NZ
I actually have that Hornby Railroad LMS Maroon Jinty in the cabinet! Very good runner, looks the part at any distance, although I do believe they are falsely advertised as being DDC ready. They're not, the only DCC Fitted Hornby Type M 0-6-0s come with the train sets I reckon. Highly recommend it if you want it.
As an LMS man, I have a bunch of Jinties, as they were one of the most commonly used locos on the LMS, both for freight and passenger duties. The Bachmann model that you serviced there would be the most detailed and accurate. On the downside, they can be a little temperamental, I find... but then, you're good at servicing things. The Hornby Jinties are fine also, and I wouldn't be without mine. They're not quite so accurate, but they're good, solid, dependable locos. The Hornby model hasn't evolved much, other than updated motors, and both older and newer motors have worked ok for me.
I don't about best but I've got the Hornby S&DJR Jinty which IMHO is the best liveried Jinty. I got mine very cheaply as a non-runner. It turned out that the connecting rods had been put on wrong and stopped the wheels turning. It may have been a factory error as there was no sign of usage on the wheels.
As others have said, the Bachmann version is the more detailed but, I wouldn't mind betting that the Hornby one will run for many years longer with fewer problems.
Quite a difference between Bachmann and Hornby on jinties . The Hornby one dates from 1978 . It’s ok but is definitely a Railroad model now . The Bachmann one is more detailed and runs better . Red ones aren’t authentic . There is a Hornby one with 16xxx number based on a preserved red one , but it’s not a colour they wore in LMS days . I think Bachmann released a Collectors Club special of this same loco , but very scarce and probably expensive. Before then there are the Tri-ang Hornby but these are really past it now .
I have models of both the Hornby and Bachmann locos, and feel that the Bachmann is the better from a detail point of view, as the Hornby one is a much "older" design, but it is a good runner!
Sorry I can't help the the best Class 3 Jinty loco. I have been giving some of emlocos a run round my layout. Sadly I seem to have accidently cause one of the two motors in my Heljan LMS Beyer Garratt loco to burn out! Not sure what to do with it at this stage! I'll try and check out replacement motors for the things. But I would just add that the Bachmann Jinty is the newer and perhaps better detailed model, wether it is better in the long run then the Hornby model I could not say.
With the grinding noise it was making at the start I was mentally shouting at the screen “turn it off you’re hurting it”! It was like fingernails on a blackboard to my ears. Love these videos. Your layout is looking smashing too.
Hi Mike. I can see you're relatively new to this channel. If you click on 'more' under this video's title (or, for that matter, any other title on this channel), you'll see a couple of links, one of which refers to 'FAQ'. You'll find all the answers you seek on the 'FAQ' link. Good luck, Paul. 👍
I've bought several railroad jinties recently for conversion to other classes. The running of these varies from silky smooth to absolutely terrible and with so many variations in chassis design it is really luck of the draw. I did get a nice running J83 (68472 in BR apple green) which is the same chassis as the jinty but might be a better fit with your other Scottish locos
I just noticed the tents - Wonderful! Really takes me back, camping down by the tracks...
Wild campers. A menace in these parts. They got shifted....
The Hornby Jinty was my first ever Loco. Over 50 years ago.
I have four of the Bachmann Jinty and I've been perfectly happy with them.
Bill, the Hornby Jinty is a Railroad model. It is simpler mechanically and less detailed than the Bachmann. Its also not DCC ready though your layout is DC and so its less of an issue. The Hornby model will be a lot cheaper as well.
Glad to see you got off easy this time! I really love the running sessions and your layout. Cheers! 😊👍
Hi Bill..another great video 👍🏻..I’ve a few Bachmann Jintys and having had a hornby example to I’ve found Bachmann to be a better quality build..although I suppose it’s personal preference really
hi Bill, great video..i ave 2 Triang jinties made in 1967.good solid and reliable and easy to maintain,nowadays Bachmann is leading the way with jinties
That one certainly came out of the “shed” a lot quieter
I'm kinda new to model railways, maintenance of my locomotive is an area I'm not 100% on yet learning loads from your videos. Thank you for doing these videos Bill
Bachmann every time, they are brilliant.
Great video Bill, I would recommend getting the Bachmann version.
How about the LMS Maroon Jinty No.16440?
There are two left in stock at Olivia's Trains.
I have one too.
Ahh glad you fixed the Hornby jinty video, bit strange lol
It amazing what a service can do to a loco
Keep safe ARP
I have an early Hornby one with a X04 motor, runs like a dream, and a heck of a lot easier to open up for maintenance, only one screw, straight down the chimney.
I have the Bachmann Jinty in early British Railways livery.
Sam's Trains did a review a while back listing its many shortcomings. However mine has been super reliable for the past 5 years and I love it to bits.
I'm a big fan of Bachmann's 0-6-0 Chassis that they use for the Jinty and Pannier tanks. I'd go with the Bachmann Jinty personally. Not sure if you'll do DCC at all but the older models without DCC readiness are usually available for good prices.
I would say the Bachman Jinty is the better lco but as always its up to the buyer to decide
Gotta get a Jinty 👍 I bought three off Ebay cheap and requiring repairs
Hi Bill good interesting video as usual, my favourite jinty is the Hornby SDJR version for the best all rounder, ie looks and good running capability.
Cheers
Tim Knight NZ
I still have an old triang jinty running well
I have a Hornby one in Maroon with the XO4 motor runs really well if a little noisy.
Hi bill brilliant video again love your layout I have 2 hornby jinty I do like them very much keep up your brilliant videos and good work Bernard
I have the J13 jinty in the GNR livery
I actually have that Hornby Railroad LMS Maroon Jinty in the cabinet! Very good runner, looks the part at any distance, although I do believe they are falsely advertised as being DDC ready. They're not, the only DCC Fitted Hornby Type M 0-6-0s come with the train sets I reckon. Highly recommend it if you want it.
As an LMS man, I have a bunch of Jinties, as they were one of the most commonly used locos on the LMS, both for freight and passenger duties. The Bachmann model that you serviced there would be the most detailed and accurate. On the downside, they can be a little temperamental, I find... but then, you're good at servicing things. The Hornby Jinties are fine also, and I wouldn't be without mine. They're not quite so accurate, but they're good, solid, dependable locos. The Hornby model hasn't evolved much, other than updated motors, and both older and newer motors have worked ok for me.
I don't about best but I've got the Hornby S&DJR Jinty which IMHO is the best liveried Jinty. I got mine very cheaply as a non-runner. It turned out that the connecting rods had been put on wrong and stopped the wheels turning. It may have been a factory error as there was no sign of usage on the wheels.
What's the handy looking electric tool that you used to move the wheels ( when testing the pickups)? Nice work
I've got a handful of Hornby Jintys. They aren't the most detailed but the newer ones with the type 7? (i think) motor in run very well :)
As others have said, the Bachmann version is the more detailed but, I wouldn't mind betting that the Hornby one will run for many years longer with fewer problems.
Quite a difference between Bachmann and Hornby on jinties . The Hornby one dates from 1978 . It’s ok but is definitely a Railroad model now . The Bachmann one is more detailed and runs better . Red ones aren’t authentic . There is a Hornby one with 16xxx number based on a preserved red one , but it’s not a colour they wore in LMS days . I think Bachmann released a Collectors Club special of this same loco , but very scarce and probably expensive. Before then there are the Tri-ang Hornby but these are really past it now .
Both need a retool
Bachmann one hands down! Better mechanism and more prototypical.
I have models of both the Hornby and Bachmann locos, and feel that the Bachmann is the better from a detail point of view, as the Hornby one is a much "older" design, but it is a good runner!
Sorry I can't help the the best Class 3 Jinty loco. I have been giving some of emlocos a run round my layout. Sadly I seem to have accidently cause one of the two motors in my Heljan LMS Beyer Garratt loco to burn out! Not sure what to do with it at this stage! I'll try and check out replacement motors for the things. But I would just add that the Bachmann Jinty is the newer and perhaps better detailed model, wether it is better in the long run then the Hornby model I could not say.
I have one and it makes a clicking noise when running in reverse only, running forward its OK. Any ideas TIA
Bill how do get in touch about repairs, I have Bachmann v2 nonrunner for repair cheers Graham Asher
Is there any space for some locomotives service and repair as I got three that need your excellent service and repair skills
To be honest. No. I'm pretty much booked up till well into next year I'm afraid.
@@oobillgood to hear that you are busy will check in again with you in the new year
Hi Bill do you know where I can buy a magnetiser
Regards
Dave
See FAQ in description.
With the grinding noise it was making at the start I was mentally shouting at the screen “turn it off you’re hurting it”! It was like fingernails on a blackboard to my ears.
Love these videos. Your layout is looking smashing too.
Ware do you get your oil and grease from plus the Re-magnetisation unit
Hi Mike.
I can see you're relatively new to this channel. If you click on 'more' under this video's title (or, for that matter, any other title on this channel), you'll see a couple of links, one of which refers to 'FAQ'. You'll find all the answers you seek on the 'FAQ' link.
Good luck,
Paul. 👍
I've bought several railroad jinties recently for conversion to other classes. The running of these varies from silky smooth to absolutely terrible and with so many variations in chassis design it is really luck of the draw. I did get a nice running J83 (68472 in BR apple green) which is the same chassis as the jinty but might be a better fit with your other Scottish locos
Sorry to say this bill but your curtains need ironing