Dear Jackson, every model of our installation projector series can be used: www.nec-display-solutions.com/p/eeme/en/products/choice.xhtml?cat=Projectors&mg=INSTALLATION_PROJECTORS
The installation projector used in this video is the PA500U. Please visit our website for contact details of our Latin American colleagues or reach out to VideoCorp for more information on the availability of the PA500U in Colombia.
this is a lie, if you send a native 1280x800 signal to 2 projectors, run the software the resulting image is stretched. circles become ovals, squares rectangles, and the OSD menu is cut off at the overlaping area. is it required to send 3840x800 to these projectors in order to have 1:1 pixel count? that is way beyond their supported resolution.
Dear Rudywtf, in your case you will get a Resolution of 2432x800 (aspect Ratio of around 35:10) if you take the overlap area into account: 1280 x 2 - overlap area (=10% = 128 Pixels). I hope this helps.
not quite, my comment was about using the Multi Screen Tool with the NP-PA550W and NP-PX803UL-BK. with both projectors a 1920x1080 hdmi signal fed into an HDMI DA then out to both respective projectors, hooked up with cat-5 cable running said MST program, the 1920x1080 is stretched across both projectors even for the 1280x800 pa550's. there is no literature involving not STRETCHING the image. if i took those PX803UL 8k lasers and fed it 3840x1200 with a 10% pixel overlap would it downscale it to 1920x1200 and then stretch the image or would projector 1 only take input from pixels 0-1800 or so whatever because of the pixel overlap, and projector number 2 grab pixels 2000 through 3840 so that the actual image is not distorted and stretched?
Please suggest; 1, Which NEC model we can use for Image blending 2, Can I Download Blending software from Internet or can you provide NEC blending software 3, Please suggest what will be the best solution if I want an image with 5 projectors. You can also give answers on mail (echo3engineering@gmail.com) Thanks & Rergards,
Dear Abdul, thank you for your request! Please find here the replies to your questions: 1) Image blending is supported by PA-/PX-/PH-series 2) www.nec-display.com/dl/en/pj_soft/mst.html 3) Only up to 4 projectors, if more you have to use a blending software like www.dataton.com Hope this helps!
good night have a M350 nec status with nine flashing red again, what do I do
Qual o modelo recomendado pra fazer essa imagem hoje em dia ?
Dear Jackson, every model of our installation projector series can be used: www.nec-display-solutions.com/p/eeme/en/products/choice.xhtml?cat=Projectors&mg=INSTALLATION_PROJECTORS
The installation projector used in this video is the PA500U. Please visit our website for contact details of our Latin American colleagues or reach out to VideoCorp for more information on the availability of the PA500U in Colombia.
que referencia son los proyectores y como podria comprarlos en colombia ?
does this edge-blending software works for NEC m303ws projector?
Hi Edward, for the M303WS you need an external edge-blending solution, for example Scalable Desktop.
NECDisplayEurope b
Is it possible to do edge blending with 3 NEC P502HL-2?
Dear Multic Geral, edge blending can only be done with our Installation projectors: PA, PX and PH Series.
is it possible to add this featured to those projectors? awesome projectors for the price point
nice share. how about the ratio ? its possible still 16:9 ? for the height ?
Hi, you can create any aspect ratio you like. It just depends on the overlap area.
You went hard on this one
NEC IS THE BEST IN PROJECTOR BRANDS
Thank you, Sumathi, we appreciate your views. Which projector or projector series do you find stands out the most?
this is a lie, if you send a native 1280x800 signal to 2 projectors, run the software the resulting image is stretched. circles become ovals, squares rectangles, and the OSD menu is cut off at the overlaping area. is it required to send 3840x800 to these projectors in order to have 1:1 pixel count? that is way beyond their supported resolution.
Dear Rudywtf, in your case you will get a Resolution of 2432x800 (aspect Ratio of around 35:10) if you take the overlap area into account: 1280 x 2 - overlap area (=10% = 128 Pixels). I hope this helps.
not quite, my comment was about using the Multi Screen Tool with the NP-PA550W and NP-PX803UL-BK. with both projectors a 1920x1080 hdmi signal fed into an HDMI DA then out to both respective projectors, hooked up with cat-5 cable running said MST program, the 1920x1080 is stretched across both projectors even for the 1280x800 pa550's. there is no literature involving not STRETCHING the image. if i took those PX803UL 8k lasers and fed it 3840x1200 with a 10% pixel overlap would it downscale it to 1920x1200 and then stretch the image or would projector 1 only take input from pixels 0-1800 or so whatever because of the pixel overlap, and projector number 2 grab pixels 2000 through 3840 so that the actual image is not distorted and stretched?
Good Job ;)
seems like the middle projector is serving no purpose at all!
Please suggest;
1, Which NEC model we can use for Image blending
2, Can I Download Blending software from Internet or can you provide NEC blending software
3, Please suggest what will be the best solution if I want an image with 5 projectors.
You can also give answers on mail (echo3engineering@gmail.com)
Thanks & Rergards,
Dear Abdul, thank you for your request! Please find here the replies to your questions: 1) Image blending is supported by PA-/PX-/PH-series 2) www.nec-display.com/dl/en/pj_soft/mst.html 3) Only up to 4 projectors, if more you have to use a blending software like www.dataton.com
Hope this helps!
oh yea cos having 3 projectors to view 1 image is a smart idea...