I need help I had put on a led steering wheel for my 2019 now I’m going back to stock and I did everything right but the airbag won’t snap in now I’m stuck
Yeah fr i had to get a set of long ass mfers from harbor freight to get my wheel off, i used a flat head for the junker stang i was replacing it from though which is odd
It can be quite the battle on the 18-19, the springs are tighter and there is less clearance. IF you can get help and push both sides at the same time while someone pulls the bag its easier.
Hey, i installed the steering wheel perfectly fine, one issue im having is that the volume buttons and the "ok" button and arrows arent lighting up, but they are working perfectly fine
now just need to come out with a blue version for those of us with the midnight blue interior. Blue stitching and blue 12 0'clock strip would be nice addition.
Installed this in my 2020 PP2 (301A) and the Horn doesn't seem to work, or the controls on the left hand side... Going to have to pop it off again (it is a tricky bitch to do so) and investigate why...
Hey so my bottom wiring harness clip is attached to the OEM steering wheel. Do you install the bottom part on the new wheel? i only saw you install the top.
Hey Bill! I notice the Controls are different on the GT 350 versus my 2020 PP2 Mustang with adaptive cruise. Will the wiring harness just automatically work with the different controls?
probably just "enough" in mechanic terms, I doubt they torqued it to the correct spec. As long as you get it tight enough to hold your wheel on you're good. I would guess like 50-100nm is enough (EDIT: 35ft lbs)
Really cool to see this as an option for 18-19 Stangs. I'm dying for a carbon fiber wheel like the one they had for 15-17 stangs... I'd trade away my heated steering for that thing ANY DAY!
Purchase Product Here:
www.cjponyparts.com/ford-steering-wheel-leather-and-alcantara-gt350r-red-black-2018-2019/p/STW139/
Is this wheel still available?
I have a torx bit screw in the steering wheel not a 24mm. FYI
need it need it need it
Good job brother
I need help I had put on a led steering wheel for my 2019 now I’m going back to stock and I did everything right but the airbag won’t snap in now I’m stuck
This wheel looks so much better
Me….5 hours later and still can’t the airbag out
You make taking the airbag off look too easy. I've been at it for an hour pissing the spring back and just can't get it😤
I have installed a lot of wheels and most come off pretty easy but I have had a few that fought me too.
Yeah fr i had to get a set of long ass mfers from harbor freight to get my wheel off, i used a flat head for the junker stang i was replacing it from though which is odd
Would you know if the stock gt500 wheel fits a 2020 gt
Thanks Bill for the How-To! Just put one in my 2018 PP1 Kona Blue GT. It really makes the car stand out!!!
What color did u use?
i struggled for half hr and gave up. couldn't get the airbag to pop out :(
It can be quite the battle on the 18-19, the springs are tighter and there is less clearance. IF you can get help and push both sides at the same time while someone pulls the bag its easier.
How long do you have to wait or do you don’t have to wait after removing battery.. can I start taking out airbag after removing the battery ?
Yes you can remove immediately, disconnecting the battery is a precaution.
Very helpful thank you
I like the heated steering wheel but I hate how the leather looks damaged already! Definitely a solid upgrade
Darnit!! Was hoping to be able to use the 350 controls. I hate having stereo on left and dash on right. It’s backwards and makes no sense
D’oh! You had me until you said I’d lose my heated rim.
Truly the only downside to the swap. To me it was worth it.
@@cjponyparts I'll have to agree. And it looks KILLER! I have the Race Red leather interior, so it would integrate perfectly.
Same here!
looks good with race red... Would be sweet if the stitching and stripe came in need for green! :-)
Is this the same procedure with a 2018 ecoboost ?
Yup
Hey, i installed the steering wheel perfectly fine, one issue im having is that the volume buttons and the "ok" button and arrows arent lighting up, but they are working perfectly fine
Best thing to do is check the plugs and make sure a wire didn't get pinched.
Would like one of these for the F-150
Mickey C we offer the raptor wheel for those
If you get a wheel without the wiring harness in it already can you transfer the oem wiring
Yeah its just harder to fit
now just need to come out with a blue version for those of us with the midnight blue interior. Blue stitching and blue 12 0'clock strip would be nice addition.
We offered blue for the 15-17 and they never really sold that well but you never know.
This is awesome, was waiting for this install. Great video 👍
Thank you!
Damn finally! Now if only I could find a non gt350 style wheel that can fit over the gt350 caliper conversion kit.
Been working on that, harder than we thought it would be. the offset is a killer.
Check out APEX wheels. They make 2 different styles of wheel that fit over the gt350 brake conversion. I have the SM-10’s
Installed this in my 2020 PP2 (301A) and the Horn doesn't seem to work, or the controls on the left hand side... Going to have to pop it off again (it is a tricky bitch to do so) and investigate why...
Did u ever figure this out same thing happened to me🤦🏽♂️
Hey so my bottom wiring harness clip is attached to the OEM steering wheel. Do you install the bottom part on the new wheel? i only saw you install the top.
This isn’t available on the website anymore, any idea when it will be back on there?
Ford is limiting supply on these, usually that means a Ford Performance version is coming soon.
Any idea of the torque spec for the center 24mm socket?
35 pound feet
CJ Pony Parts When will the S197 11-14 version come out?
Should have it next week!
Does this fit on the 2020 models as well?
yes
Awesome!!!
My 2018 has the carbon fiber package interior. Do you guys have any carbon fiber steering wheels? A link will be great!
We only offer the carbon fiber wheel for the 15-17 at the time.
Can this fit an Ecoboost?
Hey Bill! I notice the Controls are different on the GT 350 versus my 2020 PP2 Mustang with adaptive cruise. Will the wiring harness just automatically work with the different controls?
You get a confirmation on this?
Will the price ever decrease from $700 or is it expected to stay the same....
How much torque? Nm? lbf/ft?
probably just "enough" in mechanic terms, I doubt they torqued it to the correct spec. As long as you get it tight enough to hold your wheel on you're good. I would guess like 50-100nm is enough (EDIT: 35ft lbs)
Will you bring this steering wheel back???
Did you guys ever make an adapter for the 2017 wheels to 2018?
Cant you just swap over the wiring harness from the 2017 and put the 2018 steering wheels harness on it?
The 2018 airbag is different, the mounting tabs are larger. There is no adapter.
@@cjponyparts Cant i just cut the mounting tabs and rewire it with the new tab?
It’s not a wiring issue. The mounting tabs are different. You could try cutting them but that’s a big gamble with an expensive air bag
If i buy all the hardware and components could i put this wheel on my 14' GT?
No this will not work, the column is completely different. Make sure you subscribe, we will have an option for 10-14 next week.
I've been subbed for a while now :)
Can someone please tell me what song it is?
Ive been looking too 😂
How to do get this steering wheel with gray stitching ?
Is a carbon fiber version coming anytime soon for the 18-19 ?
Not that we know of but if it becomes available we will offer it!
Really cool to see this as an option for 18-19 Stangs. I'm dying for a carbon fiber wheel like the one they had for 15-17 stangs... I'd trade away my heated steering for that thing ANY DAY!
2018 mustang wheel is totally different from 2017
😃