Ford Fiesta 2006 ABS light on after module replacement... Fault finding and repair.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
Right, so, apparently this car was throwing an ABS light and a code for some "Wrong signal"... ?
Coming from a garage, the information is limited, with very few details, and some dubious work...
The ABS module was eventually replaced, but after the replacement, rather than a random fault, the car was left with a permanent ABS light on, and a hard trouble code...
Follow me on this video to find out what was the problem and how to resolve it.
Link to the video mentioned:
• Ford Fiesta auto not s...
And another one I forgot I had done...
• Ford Fiesta Durashift ...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@dylan3657]

watching your videos i learned to fix abs on a golf had no comms tested powers and grounds with light all good, opened module, with magnifing glass examined looked good, on one of the ic there was a white dot just like the full stop on a desktop keyboard looked like a normal print part of numbers, read a comment somewhere thats what they look like when they blow, scraped it with a sowing needle it was a hole of white dust found the problem. couldnt find a new chip on line with matching numbers so bought a module from spain with matching module numbers, fitted it no programing needed working fine so far. was given 1700 quote, fixed it for 117 euro thanks Louis

[@LMAutoRepairs]

😊
That's great!
👍👍👍

[@pedroneves8288]

Maybe ACTronics could have solved your issue, although in their ABS Ford's codes list the C1095 is not there.

[@patrickmurray3498]

My wife's fiesta had the same problem, ABS light on.
Blown 30 amp fuse. Using Forscan Lite C1095 code shown.
New pump unit from breakers with same part number fitted.
Part is plug n play.
ABS light self cancelled.
Brakes bleed using Forscan.
Job done some 2 months ago, with no further issues.

[@LMAutoRepairs]

😊
That's great!
👍👍👍

[@tnamen1307]

Hello, can you please explain....
Why why why???
Today's modern cars eg Toyota Glanza, Toyota Taisor, has 12V and then drops to 7V in the door close signal voltage.
Whereas, it used to be directly 12V when door closed and 0V when opened in old cars.
But today's cars has 12V at door closed, and after 20 seconds, it drops to constant 7V. When opening, it drops to 0V.
Why there's delay in dropping to 7V at door closed??
What's the significance of this 12V to 7V???
Please explain 😊

[@wackey3455]

Another great video Luis

[@LMAutoRepairs]

👍👍👍

[@ibby_786]

Well done 👏

[@LMAutoRepairs]

😊
👍👍👍

[@fabini14]

I have issues with 2006 mini, on the abs side of things sometimes just turns on the traction control light and tyre pressure, other times it will go full limp mode limited to 1500 rpm, i have running out of ideas, erro is can related, 5e1a and 3f62, have testes all the wiring, have add extra ground, clean all the contacts and grounds, sometimes will drive 1 month, other times will be like everyday.

[@LMAutoRepairs]

Any codes stored on the engine ecu?
As the first code seems like the ABS unit is not happy with some of the data coming from the engine module..😊
👍👍👍

[@fabini14]

@@LMAutoRepairs i have 3f62, that can be part of the issue, witch is strange since it says that speed of can is invalid, but speed is not measured by the abs? I start to think that and have 1 bad sensor and it generates that errors in both abs and dde

[@LMAutoRepairs]

Check your speed sensors on live data, graphic if you can... check for any discrepancies...
👍

[@fabini14]

@@LMAutoRepairs i have ckecked before but it is not easy because i can drive hours without issues

[@worroSfOretsevraH]

Hi Luis. Do you know anything about Topdon Technology DS401 diagnostic tool? I saw it at my local car mechanic, but wasn't really able to find anything useful on the internet about it. Is it some sort of a clone or what? Thanks.

[@LMAutoRepairs]

I have tried the Artipad 1 some time ago, made some videos one it, my opinion is here...
ua-cam.com/video/RHZNWB2cQ2Y/v-deo.htmlsi=PNhcYjm_8Stc2-QE
Obviously my opinion is slightly biased...
But search my channel for the other videos I have done on it...
Worth to mention, that this was some time ago, things have move forward and Topdon has released and developed since...
Make your research...
👍👍👍

[@neilus99]

If you take the pump apart it will be full of corrosion have had this a few times easy fix

[@LMAutoRepairs]

Probably...
👍👍👍

[@anapaulapereira3255]

top

[@LMAutoRepairs]

Thank you!

[@jackiemay9471]

GOOD MORNING lUIS

[@LMAutoRepairs]

👋
👍👍👍

[@Gilsal89]

I'm seeing a new scanner

[@LMAutoRepairs]

Doesn't show many times on channel... truth... but I have it for some time...
👍👍👍