There are three holes to screw in the clicks. Maybe you can adjust the click sensitivity by changing the position of the screw, you should try if that is practical.
Two of those holes are just hollow stabilizers, if you put the screw into any of those holes you'll break the main clicks. I made a similar mistake a while back on another mouse and the main clicks don't work anymore.
Funny story, I may have slammed this mouse into my desk really hard, causing the battery connector to come loose so thanks for helping me open this mouse up again.
Hey idk if you will reply to me, but as of today 6/4/24, I had my sora v2 for not even a day, and the middle of the mouse where my hands grip, there is flexing and a loud creaking noise. I this QC issue or should i just tighten some screws internally and the 4 on the bottom where skates are applied
If you put a ton of pressure on the sides it'll creak a bit due to the shell but it shouldn't have any major creaking during normal use. Tightening the screws at the back of the mouse won't do anything really as the only supports for the side of the shell is that brace that has the side buttons on it.
Is it possible to put some aluminium tape between the switches and the sidebuttons? My v2 copy has some serious pre travel which I don't like at all. I really wanna fix that at some point.
@@xinden_ It's possible the side button anchor (big black central peice) is misplaced, have you tried realigning it to see if that fixed the pre-travel?
@@mel0nFPS but you must have seen other's review on it? If so, can you tell which one would be better? Zaopin Z2 or Keychron M2 Mini? I'm confused between the two Any help is appreciated Thanks
This is the first small mouse I've seen where people are probably going to mod it to put a LARGER battery in lmao
Highly likely, especially to get a little extra play-time on 4/8k polling.
@@mel0nFPS if they ever release the dongle
True 😅
insane how small the main board is cool vid man
Am lovin these mouse tear down videos!!
nice vid man! i was very curious about how to mouse looks like, i hope your channel grows:)
There are a lot of good reviews. I hope your channel grows.
I appreciate that!
Another banger review
There are three holes to screw in the clicks. Maybe you can adjust the click sensitivity by changing the position of the screw, you should try if that is practical.
Two of those holes are just hollow stabilizers, if you put the screw into any of those holes you'll break the main clicks. I made a similar mistake a while back on another mouse and the main clicks don't work anymore.
:) did you put the power switch the opposite way? i dont have a sora v2, but my sprime pm1 has it the other way.
I just realized I think I put it in backwards on my PM1 too 🤦♂️
Funny story, I may have slammed this mouse into my desk really hard, causing the battery connector to come loose so thanks for helping me open this mouse up again.
Same pushing it back in fixed it. Probably should tape it if it happens again
Thank you for another great guide man 🫡
new mel0n video W
are all mouse scroll wheel band similar in size? Im thinking of changing the color of my scroll wheel band on my scyrox v8 .
Generally speaking they're the same shape across the board, sometimes you can find odd-sized ones but they're pretty rare.
@@mel0nFPS gotcha thank you!
insane
Hey idk if you will reply to me, but as of today 6/4/24, I had my sora v2 for not even a day, and the middle of the mouse where my hands grip, there is flexing and a loud creaking noise. I this QC issue or should i just tighten some screws internally and the 4 on the bottom where skates are applied
the middle on both sides of the mouse. right under the side buttons.
If you put a ton of pressure on the sides it'll creak a bit due to the shell but it shouldn't have any major creaking during normal use. Tightening the screws at the back of the mouse won't do anything really as the only supports for the side of the shell is that brace that has the side buttons on it.
Is it possible to put some aluminium tape between the switches and the sidebuttons? My v2 copy has some serious pre travel which I don't like at all. I really wanna fix that at some point.
Just to confirm you're having pre-travel on the side buttons?
@@mel0nFPS yea I do
@@xinden_ It's possible the side button anchor (big black central peice) is misplaced, have you tried realigning it to see if that fixed the pre-travel?
hmm no I haven't tried anything yet, since I put on skates already. @@mel0nFPS
banger video, u should check out some artisan pads
Been trying to check them out but they're really hard to get here in Canada sadly. $150+ for a single pad is hard to justify 😭
I paid like $80 shipped from artisan in Canada @@mel0nFPS
Edit: 46 Cad + shipping for XL Hien from artisan
What does the PCB weigh?
Will you please review Zaopin Z2?
Would love to know your thoughts on it.
I've been trying to get it actually but it's so hard to get into Canada I don't think I'll be able to cover it :(
I'll keep trying tho
@@mel0nFPS but you must have seen other's review on it? If so, can you tell which one would be better? Zaopin Z2 or Keychron M2 Mini?
I'm confused between the two
Any help is appreciated
Thanks
What jst is that for the battery?
If you can tell me what "jst" is I'll let you know!
Whos gonna be the first to mod this mouse?
I wish you would weigh each part of the mouse :(
I've started doing that on my more recent teardowns! Will be weighing parts on all future teardowns too!