Great vid it was nice to see a lady working on an e46 like mine😁. I wasn't sure how to take out the ignition coils didn't want to break those things they expensive lol and thanks for the note of the cabin filter tab hook-ins. I'll be subscribing
Hello i changed my spark plugs and coils now my car wont start any pointers? Do i need to have my everything put back to way it was before the car will start.
1. open hood with the latch lever up 2. turn the lever to the side to remove compartment they should pop up 3. move the seals around the comparent 4. unscrew the T40 bolts 5. unclick the stuff holding the battery cable 6. lift and remove the housing 7. take the engine cover off with a screwdriver 8. remove oil cover 9. remove bolts with 10mm sockets 10. lift cover and replace with oil top 11. ingnition cool pop up with a screw driver and pull up the cynlinder 12. use extendo counter clockwise with the torque wrench and remove old spark plug 13 check out new spark plugs and make sure it not damaged 14. install them by hand first to avoid cross threading 15. apply dialect grease on the end of the cylinder. screw it back in and lock connector back
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great vid it was nice to see a lady working on an e46 like mine😁. I wasn't sure how to take out the ignition coils didn't want to break those things they expensive lol and thanks for the note of the cabin filter tab hook-ins.
I'll be subscribing
Hello i changed my spark plugs and coils now my car wont start any pointers? Do i need to have my everything put back to way it was before the car will start.
men yell, you made it so easy ,like making cookies , clean and simple
1. open hood with the latch lever up
2. turn the lever to the side to remove compartment they should pop up
3. move the seals around the comparent
4. unscrew the T40 bolts
5. unclick the stuff holding the battery cable
6. lift and remove the housing
7. take the engine cover off with a screwdriver
8. remove oil cover
9. remove bolts with 10mm sockets
10. lift cover and replace with oil top
11. ingnition cool pop up with a screw driver and pull up the cynlinder
12. use extendo counter clockwise with the torque wrench and remove old spark plug
13 check out new spark plugs and make sure it not damaged
14. install them by hand first to avoid cross threading
15. apply dialect grease on the end of the cylinder. screw it back in and lock connector back
Thank you! Very good description!
Clean clear voice thanks for the instructional folks