things you can do further 1. just use USB flash drive and run it on hiveOS 2. if you're not gpu mining on the rig, should enable VGA/GPU ignore setting in the Bios, reboot and run cpu rig without gpu to save more on power consumption
Just watching this video and man the profitability for these CPUs has really changed in only 3 months, have to bump up to at least a 7950X for the same level of performance now.
The finish line is always moving with mining - it is hard to get anything to work long term. The only way these things work is if you get a 10x on your bag from appreciation, because mining at current prices takes 3 years to ROI.
gigabyte bios is best. you can just type 36 enter for clock ratio. vcore is under advanced voltages, or amd CBS/PBS. you definitely want to enter that as the VDD is still on auto, and appx 20w higher than it could be at that hashrate. I recently did a stream tweaking a 3900X for mining if curious. turn off cool&quiet too. XMP (and Im controvercial in saying this) should not be on. set mem to 2400mhz 1.2V. saves power and loses next to no hashrate. if you are pushing for highest hashrate power be damned XMP does then matter. 4G decoding not necessary for CPU rig under 90c is fine for temp.
I was wondering if you can help me with my settings. I have the same b450 mobo with a ryzen 7 5800x but can't find what settings for it. It's listed to do 11k hash but mines running at 7k hash
no way in hell those will touch 11. that chip should do 8-8.6KH at about 95-100w wall. CPUs are too hard to help remotely on due to the huge number of bios layouts and wild silicon lottery. see my CPU live stream for basic settings @@DEMONFIT3R
Gigabyte A520M K with R5 3600 getting temp above 90 tried cooling/used heatsink cooler still it didn't come now I want to undervolt or Heatsinks on VRM
If your gonna be building cpu rigs get yourself a non-powered card that way you don't have to attach cables that will be removed once rig is set up, This only applies to 3000 and 5000 series cpus as they don't have on board graphics. These are the two m.2 ssd's I use for cpu rigs: Netac NV3000 250GB SSD 250GB Internal NVMe SSD Solid State Drive M.2 2280mm PCIe3.0 3D NAND with Heat Sink Patriot P300 M.2 PCIe Gen 3 x4 128GB Low-Power Consumption SSD
@@shakthivel5602 5000 series amd and 3000 series is fine and then can take card off to run headless so no display connected etc... if using a 7000, 8000 or 9000 series then no need for a gpu. Hope that helps
@@shakthivel5602 yeah as long as can get a display out so you can do all the settings in bios or ryzen master then once set you can remove or run with, if you set it up to remote in then you can access it from another computer as if you were on that rig, very easy when comes to changing settings or switch to another coin.
For simplicity purposes id probably stick with nicehash... not that hive is difficult, but i just find nicehash easier/faster for me to get going... love the rig... not bad for a first one... look forward to seeing more! 60c shouldn't be a problem.. my r5 3600 has a top temp of 90c before it throttles or shuts down.
@@raghunathdesai1980 only solution I'm aware of is a better cooling set up like a wraith prism or aio liquid cooling... I used one from vetoo a while back but it died, so I'm back to a stock fan for now
that's like more than 500 usd worth of equipment, making 1,5 usd a day, and when the hashrate will go up, you'll make even less than 1 usd a day.... also consider the space you need for each motherboard . gpu or asic mining still better
i had bad luck with EVGA power supplies , i stick to HP server power sups for GPU and rog thor ('i'm a sucker for the wattage in front , what can i say i mine with CPU ) for motherboards
Great video! Always good info - havent cpu mined since I turned off my monero rigs couple yrs ago but will have to put my 5900 and 5950 to work now!! I did a quick search but curious if anyone can point me to a cpu hashrate guide that is current? Have a bunch of 5600Gs, 5700Gs and 11700k and 12700k - about 15-20 sitting around collecting dust and all with brand new motherboards I was going to sell but curious if its worth it to break those out after Im done with the 5900s.... is it reaching trying to find profit in those older cpus
I bought a bunch of $10 dollar old gpus that dont take external power cable to plug into my cpu mining rigs so you dont need the extra cables and dont need to remove it and you can always plug a monitor into it if needed
132WATTS your nuts 😂 and it's under clocked....take your volts off auto and set it to 1 maybe 1.065 volts and put your clock to 3900 you should get 13500h at 110w
I wonder what the hell is wrong with my setup, it does 190 watts i have the clock on 4.0 and cpu voltage at 1.20 and i ONLY get 12800h/s i cant figure out what the hell is the problem, dcop is enabled the mobo is a x570-p asus and the psu im using is nzxt and its gold ...
Hi ..there i would like to start cpu mineing...but i cant affort a motherboard and cpu...right know was wondering if you have a motherboard and cpu that you dont use....to give away... please let me know. Thank you.
things you can do further
1. just use USB flash drive and run it on hiveOS
2. if you're not gpu mining on the rig, should enable VGA/GPU ignore setting in the Bios, reboot and run cpu rig without gpu to save more on power consumption
About to pull the trigger on a nice CPU rig, great vid!
Good choice!
CPU mining is way better than GPU mining at the moment. I have about 21 rigs deployed right now, 3900’s and up.
What are you mining now?
@djkontol69everyday I am on zeph now, it seems to be ok now, but price is falling
Reply please
@@stick-band Raptoreum and PepePow.
@@bbuggediffy Raptoreum and PepePow
Love the vids bro. You have came a loooonnnnggg way!! Keep it up as awlays.
Just watching this video and man the profitability for these CPUs has really changed in only 3 months, have to bump up to at least a 7950X for the same level of performance now.
The finish line is always moving with mining - it is hard to get anything to work long term. The only way these things work is if you get a 10x on your bag from appreciation, because mining at current prices takes 3 years to ROI.
the downside is with all the FOMO pay rate is tanking.
Add in the random x parameters from the xmrig config file so you can enable huge-pages-jit and 1GB pages
gigabyte bios is best. you can just type 36 enter for clock ratio.
vcore is under advanced voltages, or amd CBS/PBS. you definitely want to enter that as the VDD is still on auto, and appx 20w higher than it could be at that hashrate. I recently did a stream tweaking a 3900X for mining if curious.
turn off cool&quiet too.
XMP (and Im controvercial in saying this) should not be on. set mem to 2400mhz 1.2V. saves power and loses next to no hashrate. if you are pushing for highest hashrate power be damned XMP does then matter.
4G decoding not necessary for CPU rig
under 90c is fine for temp.
The goat!
I was wondering if you can help me with my settings. I have the same b450 mobo with a ryzen 7 5800x but can't find what settings for it. It's listed to do 11k hash but mines running at 7k hash
no way in hell those will touch 11. that chip should do 8-8.6KH at about 95-100w wall.
CPUs are too hard to help remotely on due to the huge number of bios layouts and wild silicon lottery. see my CPU live stream for basic settings @@DEMONFIT3R
Gigabyte A520M K with R5 3600 getting temp above 90 tried cooling/used heatsink cooler still it didn't come now I want to undervolt or Heatsinks on VRM
the cooler came with the cpu lol
lets go Qubic for mininig
I don’t know how close to a micro center you are but the inland m.2 would be great. Inexpensive for the lower size like 250gb
nice job , now time to give it a dozen GPU
If your gonna be building cpu rigs get yourself a non-powered card that way you don't have to attach cables that will be removed once rig is set up, This only applies to 3000 and 5000 series cpus as they don't have on board graphics.
These are the two m.2 ssd's I use for cpu rigs:
Netac NV3000 250GB SSD 250GB Internal NVMe SSD Solid State Drive M.2 2280mm PCIe3.0 3D NAND with Heat Sink
Patriot P300 M.2 PCIe Gen 3 x4 128GB Low-Power Consumption SSD
All the threadripper stuff also do not have onboard GPU's.
Dude iam new to this but is it fine iam only to do cpu mining can I use some high end cpu parted with some low end GPU like gt 710?
@@shakthivel5602 5000 series amd and 3000 series is fine and then can take card off to run headless so no display connected etc... if using a 7000, 8000 or 9000 series then no need for a gpu. Hope that helps
@@gamingwithsmokeydan thanks for the info dude.. so basically for cpu mining GPU doesn't matter no matter what?
@@shakthivel5602 yeah as long as can get a display out so you can do all the settings in bios or ryzen master then once set you can remove or run with, if you set it up to remote in then you can access it from another computer as if you were on that rig, very easy when comes to changing settings or switch to another coin.
How much RAM do you need for Monero mining? Is it 8Gb, 16Gb, 32 Gb?
It's for the fan the wire and make sure you turn the little switch on the fan on high and the cables is a pain in the dick
For simplicity purposes id probably stick with nicehash... not that hive is difficult, but i just find nicehash easier/faster for me to get going... love the rig... not bad for a first one... look forward to seeing more! 60c shouldn't be a problem.. my r5 3600 has a top temp of 90c before it throttles or shuts down.
Even my Ryzen 5 3600 has temps of 90c+, is there any solution for that?
@@raghunathdesai1980 only solution I'm aware of is a better cooling set up like a wraith prism or aio liquid cooling... I used one from vetoo a while back but it died, so I'm back to a stock fan for now
@@raghunathdesai1980 disable PBO u will lose -20c off the cpu for negligible performance if u have inadequate fan
@@raghunathdesai1980use raizen master to undervolt to .975 or 1.025 , also overclock to 3900-4000mhz.
It will reduce temp by 20 degrees
@@raghunathdesai1980at hashrate you are getting on 3600 on Zephyr?
I am getting only 7500, whereas hashrate.no mentions 8800.
How to increase it?
7900x mining Monero. 17860 h/s 145w total system power draw.
I deal with cable management, I by throwing it away in a crawl space and forget about it.
yeah i do all my workers that 12k rx/0 makes a difference , latest built is on AMD Ryzen 9 5900X 12-Core Processor
Don't use need to setting disable look for GPU? on mainboard? then you can take the GPU out
xeons are nice chips for mining too got bigger L2 (so larger L2/cores) then user i serie
0.07 eletricity? damn wish i didnt had to pay 0.33 in uk.
that's like more than 500 usd worth of equipment, making 1,5 usd a day, and when the hashrate will go up, you'll make even less than 1 usd a day.... also consider the space you need for each motherboard . gpu or asic mining still better
Which motherboard pins do you have that on\off switch on? I have an Asrock B450 on the way and I want to make sure I don't screw anything up.
i also do 12k5 rx0 on this exact same CPU
It’s work without gpu?
i had bad luck with EVGA power supplies , i stick to HP server power sups for GPU and rog thor ('i'm a sucker for the wattage in front , what can i say i mine with CPU ) for motherboards
Downclock that 3900x to use less wattage/save power and your golden
Great video! Always good info - havent cpu mined since I turned off my monero rigs couple yrs ago but will have to put my 5900 and 5950 to work now!! I did a quick search but curious if anyone can point me to a cpu hashrate guide that is current?
Have a bunch of 5600Gs, 5700Gs and 11700k and 12700k - about 15-20 sitting around collecting dust and all with brand new motherboards I was going to sell but curious if its worth it to break those out after Im done with the 5900s.... is it reaching trying to find profit in those older cpus
I bought a bunch of $10 dollar old gpus that dont take external power cable to plug into my cpu mining rigs so you dont need the extra cables and dont need to remove it and you can always plug a monitor into it if needed
whats the name of them?
@@thornboroughhomes7953seems like he bought them from KFC
That is a lot of watts for that cpu ☝️
And now pricing will go up cause mining is back on the menu .....
This might be a stupid question but I'm new to all this. How did you get all that stuff connected to a keyboard/mouse/monitor?
he just run the pc open on table instead of in an pc case/tower. so he plugs all the keyboard/mouse/monitor in to the motherbord as normal.
Wait a moment... wasn't mining dead few months ago? Or that goes only for gpus? Just asking, I'm not an expert.
please can you create a rig for cpu thanks for your job
Isn't it possible with apu?
bro y is his head so big
bruh i heard that having a case is better cause it cools the cpu?
I hope you are mining with your 5950x when you aren’t producing.
Welcome to the dark side.
lulz cable everywhere i got cured from with a 32 year IT career , bro this is NOTHING
Hi,
Do you consider the 3900x better than the 5900x?
Thanks 👍😎
They are about the same performance. Memory would make more of a difference versus 3900x or 5900x
132WATTS your nuts 😂 and it's under clocked....take your volts off auto and set it to 1 maybe 1.065 volts and put your clock to 3900 you should get 13500h at 110w
I havent met a 3900x that needs more than 1V at 3.6GHz all core. most take 975 or less.
I wonder what the hell is wrong with my setup, it does 190 watts i have the clock on 4.0 and cpu voltage at 1.20 and i ONLY get 12800h/s i cant figure out what the hell is the problem, dcop is enabled the mobo is a x570-p asus and the psu im using is nzxt and its gold ...
you got it with the 3900x you purchased!, you talk alot of crap. like listening to women with mania
It is about his build, not about your mother.
lol
What the hell you’re doing here then?!
Hi ..there i would like to start cpu mineing...but i cant affort a motherboard and cpu...right know was wondering if you have a motherboard and cpu that you dont use....to give away... please let me know. Thank you.