I changed mines today. Used AC DELCO plugs 91-950. And NAPA belden 700062 PLUG WIRES. CAME WITH PLUGS LABELED FOR CYLINDERS AND OPTI FOR $72 . cane with new heat shields. Easy way is take off tires. Use an extension to a 19mm over spark plug socket . Easy peasy
If I could offer a tiny bit of advice to anybody looking to do spark plugs in One of these cars, tie a piece of string to the end of each spark plug wire before you take them out. Pull the wires out through the front near the Opti spark and label the string with the cylinder number. The string is basically a snake. Following the exact root of your wires. Tie the string to the new wires one at a time and pull them back into place. Saves a ton of time trying to figure out where the wires are supposed to go. This isn't really necessary on the driver's side but certainly helps on the passenger side getting around the AC compressor
Ac/delco or delphi. Very expensive (c.a. 800$ on ebay, remanufactured. Chinese are crap. Petris Enterprises should be good, they cost 430$. But splin drive are out of stock, pin drive only available. They also use Mitsubishi sensor on them. Bought one, waiting for delivery.
I changed mines today. Used AC DELCO plugs 91-950. And NAPA belden 700062 PLUG WIRES. CAME WITH PLUGS LABELED FOR CYLINDERS AND OPTI FOR $72 . cane with new heat shields.
Easy way is take off tires. Use an extension to a 19mm over spark plug socket . Easy peasy
If I could offer a tiny bit of advice to anybody looking to do spark plugs in One of these cars, tie a piece of string to the end of each spark plug wire before you take them out. Pull the wires out through the front near the Opti spark and label the string with the cylinder number. The string is basically a snake. Following the exact root of your wires. Tie the string to the new wires one at a time and pull them back into place. Saves a ton of time trying to figure out where the wires are supposed to go. This isn't really necessary on the driver's side but certainly helps on the passenger side getting around the AC compressor
That's some good advice I heard somebody else say that
Appreciate this well needed
Thanks for tuning in!
it's perfect match, because it is the same wires they use in factory!!
Good stuff bro
Thanks!
What if I have headers would I route my wires the same way??
Where can i find the firing order???
👏👏👏👏
We have the same car bro
Whats the best brand optispark for longevity?
Ac/delco or delphi. Very expensive (c.a. 800$ on ebay, remanufactured. Chinese are crap. Petris Enterprises should be good, they cost 430$. But splin drive are out of stock, pin drive only available. They also use Mitsubishi sensor on them. Bought one, waiting for delivery.
@@vitjuha96
Please let us know how that opti is once you got it installed
My B4 U has been down for at least 6 months lost
What’s wrong with your B4U?
You get it running yet?
Gorilla Pimp yep has to clean MAF
@@aeharris64
👊
Took me a hour and half.
Do The Spark Plugs Have To Be Gapped??
Use NGK's (OEM). They come pre-gapped.
Never use ngk on an american vehicle
@@HandMadeRoyalty Using NGK V-Power Right Now & They Work Great 🤷♂️
Another Lame video that was absolutely no help
Do you have a contact email?
Dannyrossa at gmail