Miele W1 Classic service mode washing machine WDB 030 WCS Eco
Вставка
- Опубліковано 29 вер 2024
- Instructions below:
- Door opened
- Turn on (turn knob)
- Press and maintain pressed start/stop and close the door
- When start/stop turns off: push 3 times start/stop and maintain pressed
- When start/stop starts blinking again: stop pressing it
You can switch between infos with the wheel
Infos explanation:
- then digits: software ID
F then digits: error codes
U then digits: component test (press start/stop to switch between them)
= then digits: switch/sensor test (door closed switch, etc.) (press start/stop to switch between them)
H then digits: operating hours counter display
≡ then digits: ?
L then digits: ?
Mij advice: Don't buy this machine, it has bad software that is not foolproof
Is it possible to enter service mode on the WKR series? (WKR 570/571/770/771)
Yes, of course, but I don't have one so I can't find out how
Pressed the button like that and it does absolutely NOTHING!
Accidentally selected Express and now can't change it....
I'll let it play out
👍
Ух ты! Только 12 часов наработки. Новьё!
My W1 has got demo mode. Anyone know how to fix it back to normal? At the moment I cant start the machine. So i need to deactivate this demo mode but i dont know how. I have tried a lot of things but nothing works.
Does anyone know how to shorten the time fra 2.59 min to lower in Eko mode...? 🙏
IT takes forever
Select quick
I am accidently going to demo mode, how to exit from demo? 😂
Thank you so much. I saved so much Money and time through your tip. Ist was very helpfull. ❤️❤️
i used to have an alert once a month to do 90 digrrese now its gone how do i fix it?
There should be an option for it in the manual, but if you didn't change it maybe you've started to wash at least once a month at 60°C or more.
Nach dem Wechsel in das Servicemenü werden dort Zahlen angezeigt, was sind das für Zahlen? 4117 Was ist das?
После перехода в сервисное меню там отображаются цифры, что это за цифры? 4117 Что это?
Software ID, it's in the description
Hallo, ich kaufte eine neue Mühle Waschmaschine wwd 120, aber es war eine Fehlfunktion im Programm und ich weiß nicht, wie es zu beheben oder irgendwelche Informationen über das Problem auf Google und ich kann mel nicht kontaktieren
Ich bitte Sie, mir zu helfen, die Waschmaschine neu zu starten.
If you bought it new it should be under warranty. Why not contact Miele so they fix it for free?
@@unnainconnu9098
OK
Tanks
What happened??? I’m getting this model coming tomorrow
I want to find out how to set the beep at the end of cycle
@@unnainconnu9098 I’m getting a Miele wwd120 machine. I want to set a buzzer at the end of cycles how do I do this? Also can I set the screen to always stay on instead of dimming?
@@Ohkeh640 rtfm
if only i could enter service mode on my miele wcr 870...
I done it on your model in a store!
It’s awesome!
@@SuperWasherKid2002 how?? would like to do it on mine
ilovemiele if I remember correctly make sure the door in closed to start with, Then turn the machine on, open the door, put your finger on the start/stop button, then close the door whilst still continuing to hold the start/stop button, it will start to flash, then press two times and on the third time hold down at the start/stop button again then in a few seconds your in service mode! took me a few attempts but I did eventually get into it!
@@SuperWasherKid2002 what does this do?
I’m getting a Miele wwd120 machine. I want to set a buzzer at the end of cycles how do I do this? Also can I set the screen to always stay on instead of dimming?
Wait what just happened???
Hi, i have a question. how can i change the twindos washing fluids? Do you know?
i mean like in the service menu. i want flacon 1 to be like normal washing fluid en flacon 2 to be like softener instead of bleach.
My machine says erro f 138? Can u help me??
It means that there's water at the bottom of the machine. Maybe you used too much soap. Otherwise, there's a leak.
You can try to open the pump filter door and let the water go out, then tilt the machine toward its front to remove all the water (careful, it's very heavy).
@@unnainconnu9098 thank u
Do you know how to turn off the end beep?
It's at the end of the user manual, you can download it on the Miele website ;)
@@unnainconnu9098 Yes I found it. thank you
@@intothedragon Did you find that for exactly this model? I recently bought Miele "WDB030 WCS W1 Classic Eco" but my manual doesn't mention this. I would really like to turn on the end beep if possible.
@@Johansaplast Hey Johan, my Miele is much more modern than this one on the video. I figure out that the solution was much easier than I though. I just need to go on the Setting menu and find the setting for the beep and then lower the volume, I can also turn on and off. Yours should be the same
@@intothedragon Hi Marcos, thanks for your response. Alright, lucky you then. :) I'm afraid I will have to live without the end beep because I really don't think it is available on WDB 030 WCS as it is a very simple budget model.
One of the worst washing machine ever
What makes you say that?
Good, you're testing!
Is it the same instructions for the wdb 030 wcs eco ? And how can i test the parts?
Yes, it's the same one in this video. It's in the description: U then digits: component test (press start/stop to switch between them)
Thanks for this video! Do you know how to delete the error memory?
You're welcome! ;)
Most likely Start/Stop
It does help!!! Many thanks
We have the same problem, although our Miele is now older than 4 weeks. We are not able to chose any other program then "Baumwolle" and 60 degrees. Could it be that the washing machine is requesting now for "1st program" which normally starts at the beginning?
While trying to get into the service mode I happened to reenable the "1st program" by error, so I'm sure it's possible.
Unfortunately, I don't remember how I got out of it, but just running it should fix it.
Machine thinks your baumwolle program is still running. Turn the dial to north (off), turn back to baumwolle, pres start stop until timer shows 00:00 (now the baumwolle program is finished). Now you can choose what ever program again.
@@BeyondWrittenWords Thanks a lot for this 👋. Worked for me as well.
@@BeyondWrittenWords it didn't work at first, we had to open the door before we could choose a new program.
@@BeyondWrittenWords I’m getting a Miele wwd120 machine. I want to set a buzzer at the end of cycles how do I do this? Also can I set the screen to always stay on instead of dimming?
Should the door sensor flash at the moment it starts work?
I use the lower cotton setting. You can change temperature (20; 30, 40, 60), duration (short setting from 2, 40 to 1,10
) Spin speed + water or whatever you want.
That's very interesting. My WCE670 works fine with one phone, but when I attempt to link a 2nd phone via the app I get 'Fault code 3.6.16'.
Surely these sophisticated Miele machines can be operated from more than one phone?