When you accidentally warp your peg board turn it over and iron the back side. But make sure you have your ironing paper on there so the plastic don't stick to your iron. I have actually done this several times. Hope this helps everyone with curved useless pegboards.
Omg thank you so much for the tips the most useful was the blu-tack one because I use to display my creations with pins and now I have a lot of holes on my wall
+Joana Munoz I used to use double-sides velcro but when i peeled them off the wall, the paint would come off too! I should add Blu-Tac is great for small-medium creations but anything HUGE it will require A LOT otherwise the creation might fall off!
Yay!!! Finally I always wanted to know how to stick perler bead creations to the wall so people can actually see my creations. Btw I subscribed great video! :)
Thank you because I always get out of Black because I’ve been using a lot maybe not a lot because I have the underwater and it doesn’t have too much black like 5000 s
I don't have a peg board I did for big beads but right Now I can't find the small pdg board for the small beads any methods to make stuff without a peg board? Please Respond Quickly Thanks😊
+Kimberly Aranda thanks for the question! I have never attempted to make a creation without a pegboard. SUpport you could use masking tape and place the beads on the sticky tape of the tape? BUt i think that would be too hard especially if you're making a big creation. You're probably better off getting some pegboards - it's much easier to create things with it
I've been doing perler bead art for forever now, but I could never find a way to successfully put two parts together (some of my pegboards don't have attachments)
+TruthfulLullaby that's a tricky one. You could try and do the tape method and when you peel it off line the two parts as close as you can and iron? But that would be hard!
i have a bit of a problem... so i used the masking tape method, and after i melted the beads i tried to peel off the tape and it left all the glue from the tape on the beads and now its all sticky. what did i do wrong?
very useful thank you so much ,y gf and I are going to be getting into beading real soon just tryna get as informed as I can before hand really appreciate the imfo
+Nerdster I've never used duct or clear tape. I think duct tape (gray tape) might be a bit too strong because once you've ironed you want to easily take the creation off. But don't take my word for it because I've never used it. Perhaps someone in the comments wants to chime in?
+FiloPixie it works fine at first but when you take it off it usually takes some of the sticky stuff from the tape and it stays on and is sometimes hard to remove
Yes I do. It's FiloPixiegram ☺️ you may need to heat your creation up - iron it so it's warm but not too long that it starts melting the beads, then place something heavy and flat on top. Sometimes that works
Concerning the issue with the pegboard. I don't think you're supposed to iron it THAT much. I usually just iron one side on the pegboard and then iron the other side off of it and just use 2 of the parchment papers. One on top and the other on bottom. My pegboards only look like that one when I have gone too far with the ironing of one side.
Thanks for your comment *****, it was such an expensive lesson to learn especially when first starting out lol! I don't ever iron on my boards now since using the masking tape method and I haven't had the warping boards problem since =P
lol I would think so lols Ya I don't think I've had that problem but I did learn early on that you CAN iron for too long lols and I learn it a little bit again every once in a while when I take a super long break from spriting lols
If you leave the blu tack on the wall long enough it will do the same as your Velcro did.
Eventually it does but it's lucky I change my beads around often enough that it doesn't happen (when I still had them displayed)
“Don’t pick out of a tub of 5,000” Me: Laughs in large tub
Where do you have the mario cap from? :O
Nathie Club Nintendo Australia you will have to double check for your region if they have this as a reward :)
Have no Nintendo points to spend 😪
When you accidentally warp your peg board turn it over and iron the back side. But make sure you have your ironing paper on there so the plastic don't stick to your iron. I have actually done this several times. Hope this helps everyone with curved useless pegboards.
great tip!
*making sans "buy different shades of one colour"... ok
Omg thank you so much for the tips the most useful was the blu-tack one because I use to display my creations with pins and now I have a lot of holes on my wall
+Joana Munoz I used to use double-sides velcro but when i peeled them off the wall, the paint would come off too! I should add Blu-Tac is great for small-medium creations but anything HUGE it will require A LOT otherwise the creation might fall off!
+FiloPixie ok thanks for the tips🙂
Exactly how do you use the masking tape to stop the board from Bending or melting?
any suggestion for when using the masking tape method, and the tape pulls away, taking beads with it (ruining the design)? Or am I just a spaz? LOL
Abigail Chipman put the tape on and then turn your board over
Yay!!! Finally I always wanted to know how to stick perler bead creations to the wall so people can actually see my creations. Btw I subscribed great video! :)
Crafts with Talia welcome to the channel! You have a great channel too keep up the great work :)
FiloPixie Thank you :)
Does anyone know were to buy a pack with about 1000 beads that has a few shades of one color ??????????????? (Online) or just what's the brand
I have used the masking tape method from the very first project. Love your video. Thank you.
Can I use the type of iron with the fluffy cloth over it? I don't have a regular iron and I'm not sure what I can do with my perler beads
Crafty Artsy I'm not sure what type of iron that is
Thank you because I always get out of Black because I’ve been using a lot maybe not a lot because I have the underwater and it doesn’t have too much black like 5000 s
I don't have a peg board I did for big beads but right Now I can't find the small pdg board for the small beads any methods to make stuff without a peg board? Please Respond Quickly Thanks😊
+Kimberly Aranda thanks for the question! I have never attempted to make a creation without a pegboard. SUpport you could use masking tape and place the beads on the sticky tape of the tape? BUt i think that would be too hard especially if you're making a big creation. You're probably better off getting some pegboards - it's much easier to create things with it
I've been doing perler bead art for forever now, but I could never find a way to successfully put two parts together (some of my pegboards don't have attachments)
+TruthfulLullaby that's a tricky one. You could try and do the tape method and when you peel it off line the two parts as close as you can and iron? But that would be hard!
Does any one know were I can get these from in uk and how much they are to start off 👍🏻😋👍🏻
Search Hama beads UK you can get a nice set of pegboards and beads to start of with 😊
+FiloPixie thanks so much will try to make something hopefully I will get as good as you
Jaydan Richards Hama giant gift set less than £20 and comes with 6000 beads in lots of colours,3 pegboards,tray and ironing paper
damnn i wish i knew earlier about the tape xd
Prinses Zelda So true had to bought new ones 😩
I wish I saw this earlier coz the store ran out of black beads and I really need some
+Rheinlie Taporco haha! don't worry I was the same too!
Thanks for the tips 👍
i have a bit of a problem...
so i used the masking tape method, and after i melted the beads i tried to peel off the tape and it left all the glue from the tape on the beads and now its all sticky. what did i do wrong?
you may have over ironed it? did you iron on the baking paper/parchment paper? i have a video on the masking tape if that helps!
FiloPixie happened to me to!
Shelby Robinson i saw a nice tutorial on using the green painters tape which doesn’t leave a sticky mess and is easier to pull off.
" Blue Tac will be your best friend!"
+KawaiiGenius0731 filopixie 2015 :P
When I run out of black I just use light gray and I think it actually looks better
Justin Buzzard that's a great idea, thanks for the tip :)
very useful thank you so much ,y gf and I are going to be getting into beading real soon just tryna get as informed as I can before hand really appreciate the imfo
+Roman Sedano you're so welcome! I hope that you and your GF have lot's of fun and lot's of patience :D thanks for the feedback :D
can we use any type of tape for the masking tape method?
Masking tape works best. You could use sticky (clear) tape but I would only recommend using it on really small creations
Nouran Khaled painter's tape work just as well as masking tape I've found! Hope i helped
Very helpful tips, thank you!
+Kristen L. Spinney you're welcome, thanks for watching!
Where can I get blue TAC in Maryland?
+Silly Smiles Good question I'm in Australia so I would not know, perhaps a discount store or a craft store?
can you use anything other than masking tape like duct tape or clear tape
+Nerdster I've never used duct or clear tape. I think duct tape (gray tape) might be a bit too strong because once you've ironed you want to easily take the creation off. But don't take my word for it because I've never used it. Perhaps someone in the comments wants to chime in?
+FiloPixie it works fine at first but when you take it off it usually takes some of the sticky stuff from the tape and it stays on and is sometimes hard to remove
Cool creations and great tips! Thank you!
I'm it helped, thanks for watching and leaving a comment :D
where can I buy them online im from peru and just found this on youtube????
+Andrea C. Saenz there's eksuccess and the hama website that you can. I haven't bought from those sites but heard good things about them, good luck!
its worldwide¿????
Do you know how to get lint out of perlers?
toothpicks might work
Can I use steam iron??
lolo mohammed only if u can turn the steam off
I use masking tape but the sides still raise. 😔 do u have an instagram?
Yes I do. It's FiloPixiegram ☺️ you may need to heat your creation up - iron it so it's warm but not too long that it starts melting the beads, then place something heavy and flat on top. Sometimes that works
+FiloPixie thanks it worked. 🖒 Just added you on IG also. 😊
Hi ♡ on your wall do you use 5mm beads ?
Yes :)
+FiloPixie Thx ♡ I want to make necklace, do u prefer using 5mm ?
Saw the Terraria stuff on the wall. Great job!
+xXBigDiggerXx thank you :D great to see a Terraria fan here :D
+xXBigDiggerXx I love Terraria! :)
I literally bought 6000 black beads yesterday and I ran out so I went today but they had no more😥
+Joana Munoz :D you can never have too many blacks! basic 101 :D
+FiloPixie right I use black and white pretty much in every creation I make
if you're making me people then you would need flesh which is also hard to get! I might have to make a 'number two 5 quick tips'..
I can't find them in the UK. :,(
Dung My which ones?
hama beads
That's unusual :\ there's a website called hamabeads you might have to buy it online
does anyone know if perler beads can fit on a hama board??
+shannon butler it should as long as its perler/hama beads MIDI
+FiloPixie thank you :)
no probs :D
Yeah, Hama Is One Of The Perler Bead "Clones" IT'S LITERALLY THE SAME THING
Concerning the issue with the pegboard. I don't think you're supposed to iron it THAT much. I usually just iron one side on the pegboard and then iron the other side off of it and just use 2 of the parchment papers. One on top and the other on bottom. My pegboards only look like that one when I have gone too far with the ironing of one side.
Thanks for your comment *****, it was such an expensive lesson to learn especially when first starting out lol! I don't ever iron on my boards now since using the masking tape method and I haven't had the warping boards problem since =P
lol I would think so lols Ya I don't think I've had that problem but I did learn early on that you CAN iron for too long lols and I learn it a little bit again every once in a while when I take a super long break from spriting lols
Is that Krabby behind you? Or kingler?
(Pokemon?)
Samy _Panda it's a Krabby! one of my favourite Pokémon, ever! Don't ask me why lol
I really like your channel! Great tips!
***** thanks for chceking my channel out! BTW congrats on 500 subs
Where do you buy these
Rohan Kumar thanks for your question =) what specific item are u asking about?
Perler beads
mainly from a craft store called Lincraft here in Australia otherwise I buy online from EBay
Cool, thanks! Did you know there is a great difference between fuse beads, hama beads, perler beads etc.??
See this - houseofgeekiness.blogspot.in/p/not-all-beads-are-created-equal-when-it.html?m=1
Is your bulbasaur ironed? It does not look like it!
+Emerald I tend to iron one side of the creation coz I i like the pixelated look of the beads that could be my
GREAT TIPS but the Board or the Trays that is called Warping when you peps do small stuff like terraria people flip them on your used Board or Trays
We're the he'll do u get them
Lorena Amador thanks for your question. Beads are from a store called Lincraft in Australia and storage boxes from discount stores
+FiloPixie I just haa a request, could you please make a TARDIS from the TV show Doctor who, I would really appreciate it :3 Thank you!
+Flying Phoenix that's a new suggestion! request noted thank you =D
3:15 I actually discovered that today... I wish I had known before
+Birgit Rusbach omg! Major key alert, black beads! thanks for the comment :D
im making preler bead art and im starting to steal some of my amazing. creations
did you mean 'sale' your creations?
Saying great video!!!!!!!
Great tips! 👌
Nice tips! I just started perler beading. I already made vampire knives from terraria. Tried to make a Pikachu from pokemon, but i messed it up. :/
The Noobestas I know that feeling when I first started! Don't worry you'll ease into it =) thanks for leaving a comment and welcome to the community!
Great tips😃
Madeline Plotkin Glad you found it helpful :) Feel free to add more if you got any!
thanks for the zipbag idea
JACK JABLONSKI you are welcome!
yes i did i love ur vids u got me inspired to make perler art and jewelry
:D
i finally got perler beads yay!!!!!!
+Giʀʆ Cɦɑɳgɛʀ yay!!! what have you made so far?
I made a mickey mouse FiloPixie thanks for asking👍👍😃😃😃
i have over like 1 million of these beads they are rlly fun
+Jesse Reynolds and addictive!
my board did the same thing
omg I luv your earrings :D ^-^
+Roblox Fan Est. 2007™ haha thanks I think i still have them around somewhere :P
i wish i could get perler beads😕😕
Same !!!! 😭
Great tips
Ur so pretty I love ur accent
hey thanks - it's an aussie accent
I need to ask my mom to drive me to Joannes...I wanna get into perler beading!
it's addictive once you get started !
lolve this video! you have a new subbie ;)
Dena Bee welcome to the community! I'm glad you enjoyed the video :)
Währe cool wenn es das viedeo auch auf deutsch gäbe
Asked for BluTacs. "Out of stock," they said. "You can order online," they said.
even blutac doesn't want to be my friend
+Fandom “acidicDomination” Trash oh noooo! Blu Tac is never that popular lol
U spelled tons wrong
hi
+Bruno Bruno hello and welcome =D
thx
TERRARIA SPRITES!!!!!! YESS LETS MAKE AN EXCALIBUR
:D Hello Terraria fan
You have a new subbie/😀😄
+Shippers Unitex thank you so much!
+FiloPixie salamat para sa advice reply to me if you know what i said
I use alot of whites XD
thx!!!
+Pebblesmas you're welcome!
New Subbie!
+Simple Arts & Crafts hello and welcome to the community =D
Why do u have a Mario hat on??
Everything Emma cause Mario is amazing
Lol, I ran out of blacks, so I told my mom and she said, I'll buy more... Next thing I know she buys me 10,000... LOL
Bait your mom knows best! i probably buy 5k at a time so 10k is even better!
i guess i did it the wrong time i guess
Mate that's Pikachu!
Btw I subscribed 🙂
+Joana Munoz welcome!
omg your filipino because im filipino too😀😀😀😀😀😀😄😄😄😄
+cutieboy 0728 :D welcome to my channel! Pinoy represent!
TERRARRRRIAAAAA AHHHHHHHHH
Omg girl lets be friends you have bulbasaur agh ily
Princess Penguin i LOVE bulbasaur!!!
What is that 😓
+Maira Memet what is what? =o
I wanna see u BULBA - seur.
I cannot take you seriously with that hat
you talk to much