Thanks so much for posting this video. There is not a whole lot of information for this machine as mostly only business owners and repair shops use this machine. I appreciate this knowledge you have provided. Please post more videos!
Hi - How do I change my file type to do images? I'm having trouble in that department. I'm gonna finish the video. Great content. I have some tricks also
This is great info and by far the best out there. The only issue I’m having is the auto focus. The arm moves and just goes to the lowest point without the green light. So have to manually adjust. Any ideas on this would be great thanks
It's possible there's an issue with the aluminum measurement tab (see our Weak Laser Fix video). Sometimes the tab gets bent or is incorrectly installed, which prevents the sensor from detecting it. Without that detection process, the machine can't determine the appropriate "focus".
@@mayaparts1460 Thanks so much for this. It's now working and reading perfectly. Your videos are by far the most helpful and definitely gained a new subscriber!
Great video but how do you get all 4 windows to pop u every time i turn machine on and run software only the screen in the middle i cant get the phone model selection screen to pop up
Question about the engraving part: you’re engraving directly over the wireless charging coil, so.. doesn’t that destroy/burn that coil? Or is the intensity of the laser for engraving smaller in magnitude than for back glass? That’s the only hypothesis I have..
The laser does burn whatever it comes into contact with. At normal speeds, this is typically just the paint layer that is immediately beneath the glass. Also, between the resulting ash and the paper layer covering it, the copper probably doesn't get touched by the laser (and if it does, it will just discolor, as the laser isn't that strong). But that being said, you should avoid burning over any of the cutout areas in the back frame. This wasn't so much of a problem when we posted the video, but it's definitely more relevant now with the 11 and 12 series phones, which have a lot of cutouts. For these situations, I recommend engraving the replacement glass first, and then installing it onto the phone (like we did in the Kobe video).
You can connect to a laptop using a USB cable, but you need to install the software onto the laptop first. There is a website where you can download the software and drivers. Open the Windows Add/Remove Programs menu from the Control Panel. Look for the installed software (it will most likely be written in Chinese). There should be a web address listed there. That website should have the program and drivers needed to use it with a separate computer.
However, if you just want a bigger screen to work on, I recommend buying a usb monitor adaptor instead. It is probably less of a hassle. We have a video on our channel that illustrates this process.
As long as the template is properly aligned, it should avoid burning around the charging coil. But still, be careful when removing the glass. Since Apple's glue sometimes bleeds onto it, it's possible to accidentally rip the coil out in the process.
The software usually comes pre-installed on the machine. Typically, it's a little orange M-Triangel Logo on the desktop. If it wasn't pre-installed, contact your vendor for a download link. They will have a website set up where you can download software and drivers in a single installation package.
Do you mean it just shows a red square around the phone, instead of the phone's shape? If so, there's a setting in the lower right (I think it's called "red light outline") under the Red light and Mark buttons. Selecting that option should enable the shape to display. Sorry I could not be more specific. We no longer carry this machine so I cannot check it myself.
Hi, Can yiu please guide me to the setting of selecting camera part only. sometime camera part glass take time to come off. so can yiu please help me ?
Unfortunately I can't assist with that since we no longer carry this machine. However, what I recommend is creating a duplicate template for the model you need (click File -> Save As). Then disassemble the template using the techniques in the video, delete the unnecessary parts, then fill and regroup the remaining shapes (the techniques are demonstrated in the part of the video where I move the camera frame). I think that should work, but unfortunately I can't test it myself. Good luck.
Hi. I’m just a bit disappointed coz I watch your video the day before the machine arrived at my facilities. So, I watch your software, but mine is a bit different. I don’t have the brands and models panels. I have to click on open file and then there’s only a few Apple models. I also read your other answer saying to contact the vendor, but I’m just a bit afraid they might not answering me or so... so, is it so hard to find the software? And just another question. Do you get that glue sticked to the iPhone back aluminium and it’s almost impossible to take it out? Wich liquid do u use to remove that??
Is it just the brand/model drop-down menus that are missing? Or the entire entire window? Because if the whole window is missing, it's possible that it's just turned off. Check the "View" menu at the top of the screen to see if there's an option there to turn it on. (Sorry I can't be more specific- we don't carry this machine anymore so I can't check it myself). As for the software, definitely reach out to your vendor. I've seen different versions of software and templates on UA-cam, so it's possible that different vendors have their own software packages. It would be best to get the software that is specifically made for your machine first, before trying any others. Regarding the glue- you must use the second template to burn off the remaining glue. These machines come with two templates for each model: one that only has holes for the camera and charge coil (this is for removing the glass), and one that has many more holes (this is for burning off the remaining glue after the glass has already been removed). All those extra holes are so that the laser avoids sensitive components while burning the exposed glue.
good morning Sir, I think I have the same problem. we bought the machine but we have no working software. NO MENU, NO BRANDS, Help me please donsalvo69@hotmail.com is my mail, if you can help me, thank you in advance
Unfortunately it can't do anything in color. The laser just burns the surface of whatever you put under it. So it's more like a black and white printer in that respect. Also, the machines do have templates for iPhone 12 series devices (and older machines can download those templates via the update button in the software). However, please be aware that iPhone 12 back glass removal is trickier than previous models since the MagSafe magnets are glued to the glass. Those magnets will need to be re-adhered to the replacement glass.
I am not sure about the mini. We only had the model with the built-in screen. But if it's using the same software, then you should be able to download the templates to the machine by clicking the "download" button (located below the model dropdown list). If not, check with your vendor for support. They should be able to provide a download link for any software or drivers you need.
Note: the machine will need to be connected to internet BEFORE starting the software. Otherwise the download button will not display. Check our "Basic Use" or "Advanced Use" videos for an example of the download/update process.
@@mayaparts1460 thanks for the answer, the problem i have is that the program dont have de dowload option. i am locked in the first part of your video. Part 1:45 sec, you are saying is not importat that part lol, is importan 4 me
@@1310dan If you are connected to internet and it still does not display templates or a download button, contact your vendor. They will need to provide you with a link to download and reinstall the software.
Yes it can controlled with a Windows computer. You will need to download and install the software and drivers (check with your vendor for a link), and then connect the machine with a standard USB cable.
@@techsam9257 It depends on which direction you want to move the shape. Since my template was sideways, I pressed the left arrow key to move the shape left.
Thanks so much for posting this video. There is not a whole lot of information for this machine as mostly only business owners and repair shops use this machine. I appreciate this knowledge you have provided. Please post more videos!
Well done mate, this company should pay you for this help.
Thank you so much for posting this. This is brilliant. Had the exact problem with the iPhone 8 Camera!
My laser was not aligned with F1 and F2, he starts at 4:00 minutes to explain how it works. THANK YOU MAYA PARTS!!!!
Thx friend ur guide are more helpful than the company guide
Keep up the good work. U will have millions of subs one day :) .
Lots of information in depth thank u
The legend, the lifesaver ♥️
Thank you so much for useful video
Thanks this helped tremendously!
Thank you very much, very very usefull
Hi - How do I change my file type to do images? I'm having trouble in that department. I'm gonna finish the video. Great content. I have some tricks also
Great video keep making please !!!
This is great info and by far the best out there. The only issue I’m having is the auto focus. The arm moves and just goes to the lowest point without the green light. So have to manually adjust. Any ideas on this would be great thanks
It's possible there's an issue with the aluminum measurement tab (see our Weak Laser Fix video). Sometimes the tab gets bent or is incorrectly installed, which prevents the sensor from detecting it. Without that detection process, the machine can't determine the appropriate "focus".
@@mayaparts1460 Thanks so much for this. It's now working and reading perfectly. Your videos are by far the most helpful and definitely gained a new subscriber!
Some guy hit the mini X and closed the window that says brand how do I reopen it in the software
do you manually adjust it for each model ? My preinstalled diagram have slight size difference , how do you adjust it ? whats is the best practice ?
Great video but how do you get all 4 windows to pop u every time i turn machine on and run software only the screen in the middle i cant get the phone model selection screen to pop up
Do you sell this machine? not seeing it on your website - im looking for a US based seller to order from, thx
hello interesting video, where can i buy it?
Question about the engraving part: you’re engraving directly over the wireless charging coil, so.. doesn’t that destroy/burn that coil? Or is the intensity of the laser for engraving smaller in magnitude than for back glass? That’s the only hypothesis I have..
The laser does burn whatever it comes into contact with. At normal speeds, this is typically just the paint layer that is immediately beneath the glass. Also, between the resulting ash and the paper layer covering it, the copper probably doesn't get touched by the laser (and if it does, it will just discolor, as the laser isn't that strong). But that being said, you should avoid burning over any of the cutout areas in the back frame. This wasn't so much of a problem when we posted the video, but it's definitely more relevant now with the 11 and 12 series phones, which have a lot of cutouts. For these situations, I recommend engraving the replacement glass first, and then installing it onto the phone (like we did in the Kobe video).
Thank you buddy
my corners come out square. How can I make them round?
I have M-Triangel with screen. How can I connect to my laptop?Do I need download anything?Thanks
You can connect to a laptop using a USB cable, but you need to install the software onto the laptop first. There is a website where you can download the software and drivers. Open the Windows Add/Remove Programs menu from the Control Panel. Look for the installed software (it will most likely be written in Chinese). There should be a web address listed there. That website should have the program and drivers needed to use it with a separate computer.
However, if you just want a bigger screen to work on, I recommend buying a usb monitor adaptor instead. It is probably less of a hassle. We have a video on our channel that illustrates this process.
@@mayaparts1460 the program is called SeaCAD but I cant find it anywhere.
How does this compare to the REWA?
I have a laser machine where I get the mold package
The wireless charger is not damaged after the burn in that part?
As long as the template is properly aligned, it should avoid burning around the charging coil. But still, be careful when removing the glass. Since Apple's glue sometimes bleeds onto it, it's possible to accidentally rip the coil out in the process.
My machine not rotating what's problem?
Hey man I just bought the machine and I’m not able to find the software to download can you help me find the software?
The software usually comes pre-installed on the machine. Typically, it's a little orange M-Triangel Logo on the desktop. If it wasn't pre-installed, contact your vendor for a download link. They will have a website set up where you can download software and drivers in a single installation package.
How much
Price
My red laser doesn’t move like that . It only goes on the border of them phone any tips ?
Do you mean it just shows a red square around the phone, instead of the phone's shape? If so, there's a setting in the lower right (I think it's called "red light outline") under the Red light and Mark buttons. Selecting that option should enable the shape to display. Sorry I could not be more specific. We no longer carry this machine so I cannot check it myself.
After cable install in it....shows offline again and again
Hi, Can yiu please guide me to the setting of selecting camera part only. sometime camera part glass take time to come off. so can yiu please help me ?
Unfortunately I can't assist with that since we no longer carry this machine. However, what I recommend is creating a duplicate template for the model you need (click File -> Save As). Then disassemble the template using the techniques in the video, delete the unnecessary parts, then fill and regroup the remaining shapes (the techniques are demonstrated in the part of the video where I move the camera frame). I think that should work, but unfortunately I can't test it myself. Good luck.
Hi. I’m just a bit disappointed coz I watch your video the day before the machine arrived at my facilities. So, I watch your software, but mine is a bit different. I don’t have the brands and models panels. I have to click on open file and then there’s only a few Apple models. I also read your other answer saying to contact the vendor, but I’m just a bit afraid they might not answering me or so... so, is it so hard to find the software? And just another question. Do you get that glue sticked to the iPhone back aluminium and it’s almost impossible to take it out? Wich liquid do u use to remove that??
Is it just the brand/model drop-down menus that are missing? Or the entire entire window? Because if the whole window is missing, it's possible that it's just turned off. Check the "View" menu at the top of the screen to see if there's an option there to turn it on. (Sorry I can't be more specific- we don't carry this machine anymore so I can't check it myself).
As for the software, definitely reach out to your vendor. I've seen different versions of software and templates on UA-cam, so it's possible that different vendors have their own software packages. It would be best to get the software that is specifically made for your machine first, before trying any others.
Regarding the glue- you must use the second template to burn off the remaining glue. These machines come with two templates for each model: one that only has holes for the camera and charge coil (this is for removing the glass), and one that has many more holes (this is for burning off the remaining glue after the glass has already been removed). All those extra holes are so that the laser avoids sensitive components while burning the exposed glue.
good morning Sir, I think I have the same problem. we bought the machine but we have no working software. NO MENU, NO BRANDS, Help me please donsalvo69@hotmail.com is my mail, if you can help me, thank you in advance
My machine is no show up phone name
M triangle which model is best leather machine
Can it print in all colors? and new models?
Unfortunately it can't do anything in color. The laser just burns the surface of whatever you put under it. So it's more like a black and white printer in that respect. Also, the machines do have templates for iPhone 12 series devices (and older machines can download those templates via the update button in the software). However, please be aware that iPhone 12 back glass removal is trickier than previous models since the MagSafe magnets are glued to the glass. Those magnets will need to be re-adhered to the replacement glass.
hello, i have M-t mini one, where i can find the Templates???
I am not sure about the mini. We only had the model with the built-in screen. But if it's using the same software, then you should be able to download the templates to the machine by clicking the "download" button (located below the model dropdown list). If not, check with your vendor for support. They should be able to provide a download link for any software or drivers you need.
Note: the machine will need to be connected to internet BEFORE starting the software. Otherwise the download button will not display. Check our "Basic Use" or "Advanced Use" videos for an example of the download/update process.
@@mayaparts1460 thanks for the answer, the problem i have is that the program dont have de dowload option. i am locked in the first part of your video. Part 1:45 sec, you are saying is not importat that part lol, is importan 4 me
@@1310dan If you are connected to internet and it still does not display templates or a download button, contact your vendor. They will need to provide you with a link to download and reinstall the software.
Can this be ran with a laptop that isn't Apple related?
Yes it can controlled with a Windows computer. You will need to download and install the software and drivers (check with your vendor for a link), and then connect the machine with a standard USB cable.
What key are you pressing at 12:45?
It's the "Delete" Key.
Hi can you provide me your data file I have a problem with the program
Unfortunately we no longer carry these machines. You will need to reach out to your vendor for software downloads.
@@mayaparts1460 ok tnx
Can you send me your data file i have a problem with the sofware
Unfortunately we no longer carry these machines. You will need to reach out to your vendor for software downloads.
what is earl key 13:01
Sorry about that. I said "arrow keys" but it's a little muffled.
Maya Parts thank you
Maya Parts wich arrow key should I press
@@techsam9257 It depends on which direction you want to move the shape. Since my template was sideways, I pressed the left arrow key to move the shape left.