Thank you! After watching quite a few other videos and nothing working, I about gave up and bought another keypad. I watched your video and it worked! THANK YOU SIR!
Thank you Sir, with your video and my instructional manual that had slightly different instructions, I got the courage to try and it saved me over $100, no need to hire anyone! Trruly on behalf of all women, thank you for your video!!
Thank you, sir. Clear instructions with expected results for each step. Oh and no crazy fades, effects, sound effects, etc. -- just knowledge transfer. Thumbs up!
I have a lift master key pad and an Access Master garage door motor, nothing seems to work, I've tried it ove 20 times .. It was working prior when I was programming my Siennas Homelink garage door opener.
Wow, thank you, changing out the lightbulb is stupid but that seemed to be the ticket. I was just about to tear into the circuit board and saw this video
My red light never comes on the outside keypad. Got the new lift master garage door opener synced to my car and to the remote inside the garage, but I need the outside keypad for when I run. And it lights up (so there is power) but there is no red light. I still do all the other steps with learn button , 4 digit code etc, but keypad does not work( it did with the old opener which was 2002). Suggestions?
@@YoniFrenkel no I have not. I think I’ll call the people that installed it and if they don’t do anything I’ll just replace the outside keypad. Think they are around 30 or 35 bucks or so.
actually, what happens is this. When you press and hold the star and pound keys, the keypad leds flash. Keep holding until it stops flashing and remains solid (the keypad leds are red)
I have a Liftmaster 3800PC direct drive opener without a light, how do I know when the code has been accepted? I've tried 20 times with no success using this method.
This routine for programming DID NOT WORK with the newest version of this keypad. They have changed the programming sequence, so read the instructions.
So this follows the directions on my Liftmaster opener except they say if the light doesn't flash keep pressing the "enter" button until it does. Then hit "zero" button. I couldn't get mine to flash light and it never programmed. This is the initial programming of it. What's going on. Seems to work smoothly for you.????
Same. I tried the instructions on the LiftMaster keypad door, no help. Then I pulled up this video. I have the 877MAX with a Craftsman motor. Everything is good up until you hit “Enter”. No light blink and if you hit “0”, it’s just a bunch of flashing.
I had the same problem. I was pressing the Enter button after entering my 4 digit pin. You have to hold down the Enter button until the light blinks. That should fix your problem hopefully.
Mine didn’t work that way I had to press the enter button 3 times because of the learn button color. Each color has a diff number maybe that’s a good tip on others peoples learn button color
Well, aside from the hideously overdone intro, your HUGE ERROR is that one needs to START WITH THE DOOR CLOSED! Cretins. Had to go to the Liftmaster factory video to get it done. And get the guitar player some lessons. Yikes. Friggin’ yikes.
I programmed my keypad with the door open. Not a huge error on their part. You may have a hugely different garage door opener, although it shouldn't make a difference whether the door is closed or open.
Thanks for the info. Consider trimming the intro. 40 seconds is overboard.
Even
Yeah I had to fast forward multiple times 😅
I second that. I came for help not an intro
Thank you! After watching quite a few other videos and nothing working, I about gave up and bought another keypad. I watched your video and it worked! THANK YOU SIR!
Excellent brief instructions and good advertisement for your company at the start of the video.
Thank you Sir, with your video and my instructional manual that had slightly different instructions, I got the courage to try and it saved me over $100, no need to hire anyone! Trruly on behalf of all women, thank you for your video!!
After Ann hour of watching videos that didn't work, finally yours was simple and worked great! Thank you
Thank you, sir. Clear instructions with expected results for each step. Oh and no crazy fades, effects, sound effects, etc. -- just knowledge transfer. Thumbs up!
I watched a few videos and they did not explain this clearly. Thank you for this clear and concise video!
Best video for this. Tried a few others that the code didn’t hold. Or didn’t work at all. This one’s worked.
Thanks buddy!Your instructions are the only ones that helped me get this keypad programmed.I really appreciate your help!
Thank you so much! I accidentally deprogramed mine and the instructions were lost. This video worked beautifully.
Thank you for the short and sweet video. The instructional paper On inside of my keypad wore off, this video was a big help
Thanks for that. Your instructions do not match my paperwork, but most importantly you instructions WORK!!!
Simple and straight to point. Love it
Thank you. The manual for both the garage door opener and keypad are horrible. Your video fixed me up! Thanks
great video - much better than the liftmaster printed instructions...... thks so much - made my day better
Wow, that fast i reprogrammed the keypad.. thank u so much!! I’ve been in this house for 9 months.. ugh. Should’ve done this a long time ago
Perfect - thank you! None of the written instructions worked - this was exactly correct...
Worked like a charm. Thank you for clear instructions.
Well done video. Instruction worked first time. Thanks for the effort!
Great video,worked the first time i tried it.thank you
I programmed a new remote yesterday and it wiped the keypad clean. Can I use both the garage door opener and the keypad or just one or the other?
Thanks for the info...it was exactly what I needed to do the job today.
Thank you for clear, concise instructions on this. The instructions on the keyless entry pad was not correct.
Worked for me … thanks a bunch!!
Just what I needed, thank you!
Can two doors be programmed to the outside keypad at the same time?
Thank you. Worked as you said.
Pretty sure this was the same instruction on my unit but they made it so confusing. Thanks for explaining it in simpler terms.
I have a lift master key pad and an Access Master garage door motor, nothing seems to work, I've tried it ove 20 times ..
It was working prior when I was programming my Siennas Homelink garage door opener.
So to set a temporary code, I have to climb a ladder to press the "learn" button and then climb a ladder again to when changing it back?
Helped me for my new house. Thanks.
Simple and quick! thank you for the explanation!
Work like a charm, thank your Sir!
my keyless keypad does not have an "enter" key. what should I use?
Jenny Klinefelter what kind of keypad do you have?
Wow, thank you, changing out the lightbulb is stupid but that seemed to be the ticket. I was just about to tear into the circuit board and saw this video
Worked perfectly, Thanks
My red light never comes on the outside keypad. Got the new lift master garage door opener synced to my car and to the remote inside the garage, but I need the outside keypad for when I run. And it lights up (so there is power) but there is no red light. I still do all the other steps with learn button , 4 digit code etc, but keypad does not work( it did with the old opener which was 2002). Suggestions?
Did you figure out how to make this work? I have your exact same issue
@@YoniFrenkel no I have not. I think I’ll call the people that installed it and if they don’t do anything I’ll just replace the outside keypad. Think they are around 30 or 35 bucks or so.
@@YoniFrenkel try new battery & try syncing again.
@@adwinters2063 Try new battery and sync again
actually, what happens is this. When you press and hold the star and pound keys, the keypad leds flash. Keep holding until it stops flashing and remains solid (the keypad leds are red)
How to change the battery? The keypad is getting dimmed so maybe the battery is dying?
what if no * and # button?
I agree. the only 1 that worked .. wish I'd looked at this 1st.
I have a Liftmaster 3800PC direct drive opener without a light, how do I know when the code has been accepted? I've tried 20 times with no success using this method.
What if I don’t see the solid red light with a fresh battery?
What if light never stay on when you press star and pound button
Worked for me! Thank you!
This routine for programming DID NOT WORK with the newest version of this keypad. They have changed the programming sequence, so read the instructions.
What if mine doesn’t have an enter button?
So this follows the directions on my Liftmaster opener except they say if the light doesn't flash keep pressing the "enter" button until it does. Then hit "zero" button.
I couldn't get mine to flash light and it never programmed. This is the initial programming of it. What's going on. Seems to work smoothly for you.????
Didn't work at all. We tried it about 20 times. The light on the motor unit never flashes and nothing happens
Did you figure out the issue? I have the same
Problem.
Same. I tried the instructions on the LiftMaster keypad door, no help. Then I pulled up this video. I have the 877MAX with a Craftsman motor. Everything is good up until you hit “Enter”. No light blink and if you hit “0”, it’s just a bunch of flashing.
I had the same problem. I was pressing the Enter button after entering my 4 digit pin. You have to hold down the Enter button until the light blinks. That should fix your problem hopefully.
Thank you man ❤
On every one of ours (8) there IS NO "Enter" button on the keypad
Excellent. Thank you!
Very helpful . Thanks
Mine didn’t work that way I had to press the enter button 3 times because of the learn button color. Each color has a diff number maybe that’s a good tip on others peoples learn button color
Wow So Easy even I can do it!!! Thanks
Really good 👍🏽
Clear precise!!! Thanks
Didn’t work on my 3240M liftmaster/chamberlain
Awesome thank you so much got it
This trick works till today
My keypad has no enter button.
I have this system, with remote attached remote outside, none of this works...
Kenny Poe yeah same I don’t know what’s wrong
Yeah same thing remote attached outside none of this works.
Thank you sir!
Thank you,
Thank you good sir
Thanks!
Star & pound didn’t do anything
Exactly period star a pound don't do anything no flashing red nothing.
Didn't work for mine
Go to the point. ...
Didn't work for mine bummer
0:59
Did NOT come close to working. Watch the official Liftmaster video.
Intro was grueling
My god the most generic bob ever to make a video of tons of things in the video that waste our tome
Not working
Thanks
music too loud....
The musical entry goes too long
Didn’t worj
Worthless............
Well, aside from the hideously overdone intro, your HUGE ERROR is that one needs to START WITH THE DOOR CLOSED! Cretins. Had to go to the Liftmaster factory video to get it done. And get the guitar player some lessons. Yikes. Friggin’ yikes.
I programmed my keypad with the door open. Not a huge error on their part. You may have a hugely different garage door opener, although it shouldn't make a difference whether the door is closed or open.
Works just fine with the door open you fucking jackwagon.
doesnt even work.smh
0:36
0:47