Sine MTL RTA by Geo Mods
Вставка
- Опубліковано 13 жов 2024
- Designed and built in the USA
Stainless Steel 316 construction, with PEEK insulators and polycarbonate tank
4.2ml capacity
Adjustable internal airflow control (bottom adjustment, invisible when installed on a mod). Adjusts from 2.5mm - closed
Easy top fill design
Individually serialized
Includes 3 airflow inserts for a true MTL experience (0.8mm, 1.0mm, 1.2mm), bringing high velocity air to the coil. Tool-less installation
4 x 1.5mm individual round air channels provide a smooth and quiet draw
22 x 40mm overall size (excluding 510 and drip tip)
510 drip tip compatible, narrow bore stainless steel drip included
PLEASE, remember these are just my opinions, I am just some bloke in a shed with a webcam after all, so I would strongly advise that you research everything before you buy, never go off just my opinion, read and view as many reviews as you can. The majority of my reviews are for products I have received free for review, this in no way affects my opinion.
Unless other wise stated, any premade coils used in my videos have been supplied by .facebook/pccoils/
Ensure that you check your resistances and batteries before firing any device, vaping safety must always be your first priority.
steam-engine.org/ohm.asp
Battery advice and info here - .e-cigarette-forum/forum/blogs/mooch.256958/
For 2019, all charity donations shall be going to;
Claire House Children Hospice - .justgiving/fundraising/mark-todd20
Dementia UK - .justgiving/fundraising/mark-todd22
Shelter - .justgiving/fundraising/mark-todd21
Links:
Music by - soundcloud/dyallas
Facebook - .facebook/toddsreviews/
Website - toddsreviews/
Pinterest - .pinterest/toddsreviews/ecig-pics/
Twitter - twitter/ToddsReviews
Email - todd@toddsreviews
Equipment I use:
Grecian 2000 light brown
VO5 Hair Gel
Panasonic HC-V720
A Shed
Working Cocker Spaniel (painting by btbartist/)
A very patient wife.
Hope you enjoy this video and as always thanks for watching.
If you have concerns or issues and are going to leave a comment, please do it in a civil manner, any abusive or just plain rude comments will be deleted and I will block you from my channel.
Also, don’t waste your time complaining about price, availability or state that the clone is better, once again I will just block you!
Normal piss taking is of course fully acceptable :D
If you need to contact me, please do it via todd@toddsreviews.com
As you said, there are plenty of tanks and rdas that have similar features to other tanks and RDA, this one has so many differences though which is what really intrigued me most! The topfill and the adjustable airflow along with the different afc inside, just looks like it’s a cracking atty. I agree fully that Geomods has some fantastic machining, from the mods to the attys, they all have such neat little add on’s that you don’t see on other mods.
I can see the similarities with a Dwarv but it more differences in my opinion, I am a big fan of the bottom fill in the Dwarv. Great review!
Great review. Love the tank and I think he did with the deck what a lot of people wish the dvarw was. Ledges to catch the leads is the best idea. Just need to find the website to order in the UK now 👍👍👍👍
always a pleasure watching your reviews. thank you for sharing ...
The solution of the exterior adjust for the airflow does it beautifully... I also have noticed the interior of that part looks like a kayfun, must I say looks exactly. Mr. Todd, there’s nothing wrong point out one rta has similar features of another, it’s what vaping is: nothing new under the sun. Thanks for the review.
Nice review - open, honest and factual as always.
As always, a good review Mark. No doubt it borrows heavily from the Dwarv and I’m glad you addressed that head on. The adjustable air flow and top fill are what makes this tank interesting. Looking forward to picking one up soon
Nice review. As always. I don't notice the different finishes on mine. But I'm half blind old man lol. The big difference on the deck over the dvarw is the little nubs to hold the wire in while tightening. Much easier to build to me. Air flow without inserts is more restricted than dvarw to me. Love that its Made In Merica. Love it a little more than dvarw but I'm not polish and very american so.........
I think its bout time for a new screwdriver Mr Todd. I do really like the airflow adjustment design. I like that u have adjustment but it looks clean. I like that theres no branding on the side of the tank as well. I dont mind that they used a deck design from other attys because it works. Look how many attys weve seen with the velocity design. It is what it is imo.
Managed to get my hands on one of these 2nd hand, nice condition and low serial too. It’s still in the mail though…
For mtl vapors, throat hit is essential especially with a 50/50 juice
Thanks 🙏🏼 Excellent review as always Mr. Todd
"Looks like an A..." Ach, you get ma drift 😁 As you've said many times before there's nothing new under the sun so it's almost unavoidable to have some similarities between one device and another. Still looks like a good atty though 😉
I think the long thread is a feature for filling without removing the topcap - just screw it to a certain height and fill from the side should work.
Nice review as always...
arrrghhhh!! you are 100% spot on, good catch Werner :)
I once said low nic isn't enough in a MTL, but I just tasted 3mg on Hastur mini, the flavor and TH were actually on point 😂.
Great review as always mate thank you for sharing.
great review as always, thanks Mark
Remind me at my dwarv rta
I'm not a month to lunger but its a good looking rta. Like the airflow do-hicky. Similarities to Dvarw yes, but to me, these should be seen as a compliment, not a copy. Thanks for the review, Mark 😘
*mouth
Month to lung.... now that's a tight draw lol... sorry, couldn't stop it🤣
Great review, enough going on with the Shine MTL to set it apart from similar atty’s. However the PC tank is a huge con for me, wouldn’t be surprised to see Geo Mods release a glass upgrade tank section like KHW did with the Dvarw. Just another money making excuses on a feature that should have been there from day one.
Thanks for the review Mark :) You do mention you can do really really really restricted DL: how restricted is this when compared to other atties? Is it a 2.5mm draw (like you measured under the coil) and thus similar to let's say the Savour, Dvarw mtl or Gate rta without the inserts, or is it significantly tighter wide open?
Can't answer as I don't have those atties in the stable anymore for a direct comparison. Can't explain any better than I did buddy, some would say it's loose MTL, I'd call it an extremely tight RDL.
@@ToddsReviews thanks, I think this one will probably be too tight then as I'm pretty sure you wouldn't class a true 2.5mm draw that way, that would be more like a good restricted draw, not extreme.
It's barely a rdl wide open so more restricted than dvarw little bit but smoother also. Very quiet.
Does look nice love Dvarw in R-DTL, as well as Cloudone v3 and v4 in R-DTL, so if this can provide similar vape then this may just be my next purchase
Looks like an outstanding rta would love to get ahold of one, but yea I imagine there will be lots of grumbling
Good review Mark
Your hunt ends once you get a DVARW! :p
It looks kinda like if a kayfun and a dvarw rta had a baby looks nice
Ok I like the way the tank looks, but is it a true proper mouth to lung draw? Or would you say it is a modern mtl?
I covered that in the video.
nice video but it looks like armor...LOL.....joke aside i love my dwarvs and this looks like a great addition to that kind of attys but two tone finish is deal breaker for me. I wanted to buy it but luckily i saw this video. Thanks Mark!
Which one had the best tast of all these that you tasted?
No juice flow control?
Better version of Subtank mini and Lemo Drop 😉😁😂🤣
Hy what mtl tank very good flavour!??? Dvarw ? Taifun gtr? Sine mtl?Thanks
SQuape EC
if have this afc adjustment on my patibulum rta.
that's nice :)
Ledges on the edges... poet and you didn't know it? 😅