How to Design a PCB from Scratch with EasyEDA | COMPLETE Tutorial | JLCPCB LCSC ALIEXPRESS | 2022
Вставка
- Опубліковано 23 лип 2024
- In this week's episode of tech Tuesday we would look at how to design a PCB with EasyEDA. This video is mainly focused on how to go from having a schematic diagram to PCB.
From Idea to Schematic to PCB - How to do it Easily | How to Design a PCB easily with EasyEDA & JLCPCB - Complete Tutorial | Printed Circuit Board Design - Beginner Step by step 2022
Link to FL5150 data sheet here : www.mouser.com/datasheet/2/14...
----------------------------------------
Channel Gear and Equipment's (Affiliate)
Amazon : www.amazon.com/shop/nerdbishop
AliExpress
~~~~ Multimeters ~~~~
UT61E Plus Multimeter
s.click.aliexpress.com/e/_AK3GEo
UT204 Plus Clamp Multimeter
s.click.aliexpress.com/e/_9ihxKq
~~~~ Lab Bench Power Supply ~~~~
RD6018W 60V 18A Bench Power Supply
s.click.aliexpress.com/e/_Act4hO
~~~~ Oscilloscope ~~~~
DSO FNIRSI PRO Oscilloscope
s.click.aliexpress.com/e/_ATrDZM
~~~~ Soldering and Welding Kit ~~~~
KSGER T12 STM32 V3.1S Electric OLED Soldering Station
s.click.aliexpress.com/e/_AFoQjw
DH30 Battery Spot Welder Kit
s.click.aliexpress.com/e/_A0qKwJ
~~~~ Testers ~~~~
USB Adjustable Discharge Load
s.click.aliexpress.com/e/_9HFFwe
RD UM34C USB Tester
s.click.aliexpress.com/e/_9H0yI0
USB Tester with Current Voltage Indicator
s.click.aliexpress.com/e/_9frmaK
Qualcomm - QC2.0 & 3.0 9V / 12V / 20V Trip Simulator
s.click.aliexpress.com/e/_ANg1iG
~~~~ Others Tools ~~~~
Xiaomi Mijia Screw Driver Kit
s.click.aliexpress.com/e/_AeEkhC
Non-slip Metal Scalpel Knife Set with 40 Blades
s.click.aliexpress.com/e/_AmSdJe
----------------------------------------
There would be two other video parts later on that would be focused on how to order the pcb from JLCPCB, acquire the parts needed for the pcb developed in this video from LCSC and ALIEXPRESS and finally how assemble the parts and test the final product. PCB from schematic | schematic to pcb | pcb design software | pcb design tutorial for beginners
Hope you learn something new, cheers!!!
Kindly support us on patreon here: / delali
Don't forget to LIKE, SHARE and SUBSCRIBE
Follow us @diydelali on Facebook, Twitter and Instagram
Channel Theme Song: Entire by Quincas Moreira
#pcb #easyeda #jlcpcb #lcsc #esp8266 #nodemcu #arduino #wifi #repeater #delali #design #innovation #maker #diy #science #technology #stem #designthinking #electronics #electricity #hobbyist #enthusiast #stayhome #staysafe #wifirepeater #hack #espressif #microcontroller #embedded #embeddedsystems #software #wiring #schematic #routing #track - Навчання та стиль
@Delali, I was considering paying $90 for a Udemy EasyEDA course. With your two excellent videos, I think I can skip that for the moment. Looking forward to more videos!
Thanks so much for your kind words. I really appreciate them.
I will surely work on more videos like this.
Comments like yours inspire me alot. Cheers!!
So should show your support to @Delai by donating a cup of Tea, I already subscribed as a support for his hard work.
This video delivers. So many tutorials fail to go into detail concerning placing and connecting a Via, changing the Track width, changing layers, and other little things that come up while laying out a board. This is truly a 'start to finish' type video. I sure appreciate your in-depth explanations.
Thanks for the kind words fam. Comments like yours inspire me and lets me know to keep up the good work.
I appreciate you taking the time to let me know your thoughts. Happy New Year Fam.
buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?
Definitely one of the best video I ve seen. No loud music, very clear explanations, and nice tutorial. Very professional!
Thanks fam. Much appreciated. Kindly don’t forget to subscribe. Cheers!!
buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?
Great video, thank you!
This is the only video someone needs to watch to make a pcb . To the point and all tiny details are given . Just amazing.
Awesome EasyEDA tutorial. Thanks.
Amazing tutorial to follow!
An easier way of adding via's is to simply draw a track on the top layer, and when you encounter an obstacle, you click to create another node where you want the via to be, and then switch to the bottom layer, and it will automatically create a via for you right where your last node is. Then you keep on making your track on the bottom layer, and when you want to switch back, you switch to the top layer again, and it will create the second via. Not sure if this is a new feature that wasn't available back then, but in the current version it works like that.
Thanks for the great video!
This is an eye opener for me and hopefully a lot of people.
I didn't know what you just explained exist until just now. I tried it and it works just as you mentioned. Thanks so much. I'm gonna make another EasyEDA video and use this new approach in it together some other new tricks I've picked up.
Thanks so much once again fam. Much Love💗
This is wonderful! Thanks very much for this.
You're welcome fam. Am glad you like it.
Thank you so much for this video! You saved me so many hours trying to figure out things myself (and some I would never have known they exist - like changing the model type). Also I think the pacing of the video is just right.
Thanks for the kind words fam.
Comments like yours keep me inspired. Really appreciate your effort to write your experience. Cheers!!!
Please dont forget to subscribe.
Just what i was looking for! Thanks! :D
Glad I could help!
Kindly let me know how your designs go.
Please don't forget to subscribe. Cheers!!
Now This is what any tutorial should be like. Nicely done, very thorough.
Glad it was helpful! I'm really inspired by your comment.
Merry Christmas fam. Please don't forget to subscribe!
Awesome video - exactly what I was looking for. A quick overview of the whole process. Subscribed!
Awesome, thank you!
You're the best. I'm also glad this video was of help.
Excellent tutorial! Thank you!
You're very welcome!
Please don't forget to subscribe! Cheers!!
Excellent tutorial, very clear and one of the best I have seen. Thank you very much!
Wow, thanks! Glad it was helpful fam.
Happy new year to you. Please dont forget to subscribe.
Fantastic! I learned much!
I'm glad you found this video helpful.
Please don't forget to subscribe!
Great video!
Glad you enjoyed it.
Thanks so much. Please dont forget to subscribe. Cheers!!
Outstanding! Thank you
Thanks for the kind words. Cheers!!
Thanks for this video, very professional
THANK you SO much for this helpful tutorial! It’s exactly what I need because I don’t know how to do this. I can’t wait to get started with my project!
On my channel, I show my DIY step sequencers. This will make building them so much easier!
Thank you, thank you!
You are so welcome!
Some cool videos you got there.
Great vid. Just the right level of detail. Thank you
Glad you liked it!
Thanks for the feedback.
Please don't forget to subscribe! Cheers!!
Amazing tutorial, so helpful! Great teacher 👏
Glad it was helpful!
I appreciate your comment fam. Merry Christmas.
Thank you. Subscribed!
Thanks for the sub!
Happy new year buddy.
Helpful video. Thankx.
Glad it was helpful!
You're the best. Please dont forget to subscribe. Cheers!!!
Your explanation is really super straightforward and above all understandable. Thanks a lot!
Thank you so much. Glad it was helpful!
Feedback like yours is why i keep making videos❤️
Please dont forget to subscribe. Cheers!!
great video and explanation!
Thanks so much.
Glad you liked it!
Please don't forget to subscribe. Cheers!!
Thanks for sharing your knowledge! Great video 😀
Glad it was helpful!
Please don't forget to subscribe. Merry Christmas!
Thank you, this is great and exactly what I was looking for. I was getting really confused trying to work this out by myself and you made it easy
You're very welcome fam. Glad it helped!
Please dont forget to subscribe. Cheers!!
buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?
Thank you for taking the time to share this. What a great application and a wonderful tutorial! Thanks again.
Thanks for the kind words friend. I'm glad this video of could help.
Please dont forget to subscribe for more. Cheers!!
Great job on the video, it was very well done. Thanks very much and Salome!
Thanks for the kind words.
Glad you enjoyed it!
Please don't forget to subscribe. Cheers!!
Bro this is very comprehensive ... you make engineering feel easy and understandable
Haha. I try. Thanks for the kind words brother.
@Delali, thank you very much this tutorial is excellent it answer all my questions and showed me how to it properly. Thank you!!!!
Im happy this video was helpful to you.
Thanks for the feedback fam. Please dont forget to subscribe.
Wow, great video. Thank you.
Glad you liked it!
Please dont forget to subscribe! Cheers!!
Appreciate so much. Very well organized tutorial.
Thanks buddy.
Please don’t forget to subscribe. Cheers!!
Much love brother I've learned exactly what I needed you are a God send, Best tutorial I've watched , subbed and thumbs up looking forward to checking out your other content!
Awesome, thank you so much!
Thank you very much for this excelent tutorial.
Glad it was helpful!
Please dont forget to subscribe. Cheers!!
This tutorial is very interesting and comprehensive. After watching I've been able to design my first pcb. :-) Thank you very much.
Amazing. Thanks for the kind words.
Please dont forget to subscribe for more. Cheers!!
Thank you boss .You are God sent
So nice of you.
Please don't forget to subscribe. Cheers!!
you're doing great bro, thanks.
Thank you bro.
I appreciate that!
Please dont forget to subscribe. Cheers!!
Brilliant video!!
Glad you liked it!
Please don't forget to subscribe!
Thank you, brother! Very helpful video. Great teacher you are.
Thanks so much for the kind words.
Merry Christmas and happy new year in advance. Cheers!!
Best understandable video I have seen. Thank you for a very audible tutorial. I learned a lot.
Thanks for the kind words Karl.
I'm glad this video was of help.
Please don't forget to subscribe. Thanks very much. Cheers!!
Great video man!
Thanks so much. I'm glad you like it.
This was an awesome tutorial. Thank you.
Glad it was helpful!
You are very welcome.
Please don't forget to subscribe. Cheers!!
Wonderfully done.
Thank you! Cheers!
Thank you for this lessons! a very interesing video .
Glad it was helpful!
Thanks for the kind words and for the feedback.
Please dont forget to subscribe. Cheers!!
Now THIS is thorough. Kudos, Delali! You are an awesome resource for any Programmers looking to build. Great Job!
#Whatsappsquad!
Wow, thank you!
Hi Delali,
many thanks for this video! Mainly thanks to it, I learned to use EasyEDA a bit and I created my first PCB in one day :-) Before that I tried KiCad and Eagle, but without success. One tip - as I found out, the track through the bottom layer can be made easier - just start on the top layer, after clicking to the point where I want to have a Via switch to editing the bottom layer, continue the track to the next via place, switch back to the top layer and complete the connection. The vias are created completely automatically :-)
Am very happy to hear your success story. Am glad this video was of help to you and thank you very much for the tips. I will try to put that in my next video.
Please dont forget to subscribe.
great, thanks for sharing 👍
Thank you too. Cheers!!
Please don't forget to subscribe!
great tutorial!
Glad you think so! much greatful.
That was a very nice Video, I learnt a lot. Thank you !
Glad it was helpful! Thanks for watching. Kindly check out our other videos, maybe you'd find something you like
Thank you very much! this is so useful, and now I have a good, working PCB. Thanks!
Thats amazing fam, Thanks for the kind words.
Please dont forget to subscribe. Cheers!!
buddy did u understand why he applied ground net at 27:50 ? why at the specific area only?
Thank you Delali. Very well explained in a logical sequence.
Thanks so much for the feedback.'
Comments like yours keeps me going.
Merry Christmas and happy new year in advance. Cheers!!
Fantastic video. I definitely learned a great deal from your presentation. I am looking forward to other videos. Thanks again for all your efforts.
Glad it was helpful and thanks for the kind words.
I appreciate you taking the time to leave this comment. Have a good one.
Trying my hardest to learn how to make pcbs. Everything is easy when you know how. Your vid helped me the most so far. Well explain
Glad I could help!
Thanks so much for leaving feedback. Much appreciated.
Please dont forget to subscribe. Cheers!!
Cool video, thanks :)
Glad you liked it!
Please dont forget to subscribe.
Excellent tutorial. Helped me a lot in getting started.
Glad it helped. Kindly dont forget to subscribe. Cheers!!
very use full thanks
Happy to help.
Please don't forget to subscribe. Cheers!!
Very nice tutorial and nicely explained, enjoyed watching this and learned some useful stuff. Thanks for your time on this, stay well :)
Glad this video was helpful. Thanks for taking the time to watch. You rock :-)
Thank you very, very much. This is the Video i needed !!! 👍
greetings from germany
Glad it was helpful! Danke sehr
Please don't forget to subscribe. Cheers!!
Very nice tutorial, able to quickly learn how to create pcb. Thanks a lot for explaining clearly.
Glad it was helpful! I appreciate your comment.
Please dont forget to like and subscribe. Cheers!!
thanks , the schema seems similary to my needs.
Thank you !
You're welcome! Thanks for watching. Hope this video was helpful?
Very well explain. Thank you
Glad it was helpful! Kindly check out some of the other videos on the channel. Cheers!
Sabi boy Africans can’t disappoint. Very clear and concise explanation. Thank you for this man
The Best video tutorial I have ever seen
Thanks for the kind words brother.
I appreciate you taking the time to leave this comment.
You're the best. Cheers!!
Please dont forget to subscribe.
Thanks for the video. That perfectly fits to my level in this area.
Looking forward to watching more content on your channel.
Glad it was helpful! I will do my best to keep more coming.
Happy new year fam.
Please dont forget to subscribe.
@@Delali Thanks! Happy New Year too!!!
Yes, already subscribed :-).
Keep doing great stuff!!! All the best and stay healthy!
@@NikolayAntipov Awesome. Thanks fam. Take care
Easyeda is a great software. Strongly recomended.
Indeed it is. Really appreciate the support brother. Keep up the great work
Nicely done.
Thanks for the visit and kind words.
I appreciate you taking the time to leave a comment. Cheers!!
This is by far the best video on easyeda 😃 liked and subscribed!!
Thanks so much for taking the time to leave this comment. It means so much to me fam.
You're the best. I really appreciate your efforts.
Nice job. Very clear explanation.
Glad it was helpful!
Really appreciate you taking the time to leave a comment.
Please dont forget to subscribe. Cheers!!
Excellent video
Thank you very much!
Please don't forget to subscribe. Cheers!!
Thank you for this lessons!
One small tip: when there are unused pins or something similar that do not need to be connected, just put the "NC - not connected" mark. That is sign "X" from the "Wiring Tools" toolbar and there will not be such warning.
Thanks so much for the tip. I really appreciate it.
I'd do well to add that in my next pcb tutorials.
Merry Christmas and happy new year fam.
@@Delali 👍👍👍
This guy is a legend! Thank you!
Really appreciate you taking the time to leave this comment.
It keeps me inspired and lets me know my work helps people out there. Cheers!!
@@Delali Just ordered my first PCB!! Thanks again. By the way, if I may, I would suggest a video about the SMT assembly process.
@@FeuFabricio Thanks for the suggestion fam. I really appreciate your effort to share. I will look into that.
Please don't forget to subscribe. Cheers!!
So clear tutorial. Learned from this video. Thank so much and keep it up ! Cheers bro.
Happy to hear that! Thank you.
Please dont forget to subscribe.
@@3cm648 thanks. i would check your channel out.
@@Delali thans Delali
Great job. I have a 20 yr old BSEET degree and with out a doubt your presentation was one of the most technically accurate, and effectIive presentations that I have come across. Keep up thr fantastic work. I am now a new subscriber.
Wow, thanks!
Thanks so much for your kind words. I really appreciate you taking the time to leave this feedback.
Here's my Instagram handle @nerdbishop. I would love to be friends. cheers!!
nice. thanks
Thank you and welcome.
Please don't forget to subscribe! Cheers!!
As a beginner thank you i learn a lot
You’re welcome 😊
I'm glad you found this video helpful.
Thanks
You're welcome.
Please don't forget to subscribe. Cheers!!
Very very useful 👍
Thanks a lot.
Please don't forget to subscribe.
Nice video! One question how do you add more layers to your PCB?
Nice work
Thanks fam.
Excellently explained. Would love a follow up on the pcb
Glad you like it. PCB video is still in the works. Kindly Subscribe to stay in touch.
brother it was a very nice and exicting vedio may Allah bless you thank you so much
So nice of you. Thanks for the kind words.
Please dont forget to subscribe. Cheers!!
Your video help me a lot to understand how to use vias, thanks a lot for share information with us
:-)
Glad it was helpful!
I appreciate you taking the time to leave this comment🌹
Please don't forget to subscribe. Cheers!!
Good video thanks for sharing👏🤝🤝🤝
Welcome 👍
Thanks for the feedback.
than you
You're welcome fam.
Please dont forget to subscribe. Cheers!!
Great work bro
Thanks for watching. Hope you learnt something
I was window shopping and I passed through this and I watched it and watched until I start to feel like an engineer...You r Jesus I was blind now I can see...thanks a lot...Im from Zim in Uk
Thanks so much for watching and also for the comment.
Hello Joe, nice to meet you. I'm from Ghana.
Nicely explained
Thank you so much 🙂
nice video bro . would like to learn more. of it.
Thanks bro. Stay in touch for part 2 and 3
Thank you in the name of JAH
You are welcome mi breda. Thanks for watching.
Thank so much for this teaching u are blessed 🙏 please i want ask how can i add different type of ic to my schematic sheet at same time and have them to work at a time such ass jrc4558 and str6753
You can add both ICs on the sheet you're working on using the library tab on the left. They both work fine.
Nice introduction.
Thanks fam. Hope this video was of help!!! Cheers!
Thank you so much for your quick answer whenever I ask a question.
Sir how do I uncover a trace from solder mask using EASYEDA?
Secondly how do I add solder on the uncovered trace inorder to make it able to carry high current.
Great tutorial! One of the best ones i have seen! Don't you have to make connections between ground pins/pads and the ground plane? Will the pads be connected automatically to the Copper area? I am currently working on my first PCB, which is going to be for a guitar compressor pedal.
I connected the ground pins and pads together using a ground net.
Kindly see 25:48 of the video for reference.
Good video, nice and easy delivery. I think you might want to leave a bigger space between high-voltage and low-voyage tracks in any future designs, for anti-tracking and safety.
I enjoyed watching this, we'll done and thanks.
Thanks for the tips Chris Potts, really appreciate your efforts. Will consider them in my future designs as you advised.
Great vedio Sir....deligintly and aptily very informative.....thanks v much. I'm sending you a suloute from Kingdom of Bahrain 🇧🇭
Thanks for the kind words. Much appreciated fam.
I salute back from Ghana.
hey man, is there a specific reason why you didn't go with a GND net copper layer covering one of the 2 layers to avoid having to manually connect the GND pads together?
I'm trying to find out if there's a way to edit the silkscreen for the components. I have 32x32mm LED matrixes that have 64 LEDs and the silkscreen has a 32x32 square with 64 circles in it. They clutter up other items that are placed in the same area (the LEDs have a clearance that allows other components to be placed underneath them.) I'd like to remove the 64 circles and just have the square.
Thanks for reaching out. Yes you edit the silk screen.
Please see this link. Someone explained how to do it with two approaches.
easyeda.com/forum/topic/Remove_Silkscreen_for_specific_parts-n5ZTbtL3W
Please let me know if it helps. Thanks for your patience.