Firewall construction using the new bead roller
Вставка
- Опубліковано 22 гру 2023
- Back on the 78 Toyota Corolla project called Crusty. started on building the firewall using simple techniques with recycled metal. Also get to play with using the new bead roller I built
- Навчання та стиль
Your electric bead roller worked really well for that large sheet. You would have had a really hard time doing that with the bead roller as it came. You'd need a couple of extra people to help you with it. You really put a lot of thought into modifying the bead roller.
Happy New. I'm from Pennsylvania. I work at a stainless steel factory. I'm retired now. I like watching your methods. And The jigs you make. Like I say whatever it takes to get the job done. Chris👍
Sometimes it works best when you don't have a plan and you work off the fly. The Tips are always good!! Thank you!!
It's just amazing watching you create, you do things like nobody else and the results are better than factory. Another great video Tony thank you
Great work. You explain things so well, and don’t over complicate things.
Brilliant abstract 3D thinking there. The bead rolled seams are very pleasing. Great stuff Tony, thank you.
Tony I don't think anyone doubted the bead roller. Let's face it you deserve it for the education snd entertainment you provide, Joe
If you put an angle more than 90 degrees on the back of your bead roller guide fence it will tighten down to the table as you tighten the front, eliminating the need for additional clamps. Great videos I love the way you explain things.
Like the complete explanation you give, thoughts and considerations, making a difficult job doable.
Man what a sweet bead roller!
You are far too modest. Given what you have built so far the firewall is a piece of cake.
Never stop learning when i watch Tony! Blessed Christmas!!
I wish I could have time to come up and work beside you! I have said it before , you need to start a school to bring the young ones along. It’s not all computer , they need to have an imagination and use their brains!
The bead roller worked really well. The firewall is looking good. I think the bead roller is probably a real time-saver. Great video, Tony.
Learning so much from your channel. I am going to try and and fix my 2010 ford escape rear wheel well areas when it warms up. Watching your vids is giving me the confidence to try! Thks for sharing!
Nice job on the bead roller! I'd have sworn it was a factory built machine.
Hey Tony, nice to be here again, I'll stick around for the floors and firewall🙂
👍💪✌
Merry Christmas my friend
You give us a present every time you post a new video
Thanks for being there.
Once again nice job, firewall are tricky, because of fit and eye appeal .. The toe board came out nice, especially picking up some extra clearance , two inches is a big gain in a small car. Thanks for sharing this .
Merry Christmas to you Tony! Thanks for another great video and all of your hard work this year. You never fail to impress me with your skills and especially your ability to teach us who to do some of the things you do!
A treat, an education and a li'l bit o' entertainment, as always, with Fitzee's Fabrication. Thank you for another great year of 'Edumacation' Toni. Have a grand holiday and we'll see you, no doubts, early next year!
Merry Christmas to you and your family sir. I'm just in awe of the work you do. The things you do with just simple tools just amazes me. Wishing you a Happy New year and keep the videos coming.
That firewall is amazing tony. And that beadrollers doing its job
That’s an excellent point you made, about preventing moisture getting into the cabin. It’s something I’ve never thought of, but is soooo obvious once you pointed it out.
Love your videos Tony; have a great Christmas.
Great advice from years ago… Beads before bends!!
Once again, turning Chicken Poo into Chicken Salad. Just brilliant! Merry Christmas Tony.
Hey fitzee , I was looking at one of those in a junkyard a couple weeks ago .. It may have been a Northern car , was really rusty for my area . Seeing one about as rusty as yours started , seeing in person again really drove home just how much effort you put in that dang thing .
Merry Christmas an Happy New Year
Another master class. Thank you Fitzee.
We are so fortunate to have a master at his trade show us how to do things by hand. Merry Christmas tony to you and your family.
She looks factory excellent job Fitzee. 👍
Thanks for another excellent video Tony!!
It's great to see you at R&D yet again. Your teaching helps take the work out of the job and presents an avenue to pursue that involves, 'don't over think it' as a numbered part of the instructions. When you break it down, it's not so overwhelming. Nice to see you at it again.
Fitz, your videos are always informative, and educational. Learn something new all the time. That Peanut, she's got the life !!
MERRY CHRISTMAS TO YOU AND YOUR FAMILY THANK YOU FOR THE VIEDOS THIS YEAR I APPRECIATE THEM
Merry Christmas to you and yours, as we remember the reason for the season.
Hey Tony, great to see the bead roller at work. Thanks for the tips! I learn something every time. Merry Christmas!
Same to you!
That's looking great so far. Baby steps.
Excellent video Tony. Reminds me of Junior High School shop class, which I aced!!! I'm still using those skills at 70.
another great video by the Master!
20:00 That made me laugh out loud! 🤣🤣 So many fabrication channels have the drama of precision. Fitzee, your relaxed but expert approach gives confidence “… for the restofus!” ❤️🇦🇺
Great work break it down into pieces not so overwhelming. Always picking up tips here in Nova Scotia from you thanks .
Another Great Video... Thanks Again Tony, and Merry Christmas to both of you. ❤❤❤
Always in awe of your work..
Merry Christmas Fitzee, Wendy, and Peanut. God bless you all and have a wonderful Christmas and a healthy and happy New Year. 👍👍🙂
All good stuff well done sir Tony thank you for sharing
Kyle, over at Carter Auto Restyling would love that bead roller.
Looks like it works really good.
Hope you have a Merry Christmas.
nice project! well done Tony, well done
For the one that’s new you’re in for a treat!😊
I like simplicity!
That is very cool the bead roller works very nice
Well if you cant build a racecar after these videos i dont understand why has all the details you needto complete a project like this thanks fitzee i look forward to these videos every week
Merry Christmas Fritzee Be Safe and Warm and Have a Great Day Keep Bendin looking Great
Thank you and Happy Holidays Fitzee!
Yes! Back on Crusty. Excellent video!
Merry Christmas to you, Wendy and Peanut.
I was waiting at the end of the video to see if Peanut made an appearance from the heated condo. We have two cats here.
Thank you for all your talent I do apply it to me
Great content, and progress!
Hey Fitzee! I was thinking of you the other day when I picked up a bunch of 18 gage shelving for free.
Nice job on the fire wall Tony, Merry Christmas.
Thanks Tony for another informative video,I have learnt a lot from this project
lookin good with your cool new toy
Hey FITZEE ! Wen you grabbed the center of fire wall you looked like a newbie 😃 trying to finagle it in place , but in the end you showed us who's the MASTER ! love your teachings. I spied the Vista Cruiser on rack 😉
Keep Em Coming !
Great tips Tony, Merry Christmas to you and the family
Thanks! The tips were good.
Very nice work Tony looks great Merry Christmas 🎅🏻🤶🏻
Very good job.
Awesome
Fabrication. Happy New Year to you. The tips were good
Merry Christmas to you and your family.
Looks Great.
Merry Christmas and Happy New Years 2024 🌏
#STAYSAFE
#PHILLYPHILLY 🇺🇸
Hello Tony, wishing you and your family a Merry Christmas and Happy holidays. 👍
Happy holidays!
Love this channel. I learn everytime.
You are a true craftsman! What about putting locking casters on the bead roller base? You are also a Great teacher.
I don't see a real need. Seems Tobe working fine
Very nice!
Enjoyed it. Nice to see you doing fabrication on a car again. Thought you might run a bead or two across or around the firewall to stiffen it and/or "beautify" it. Thanks!
That will come. Have alot going on yet to decide the final finsh
Great stuff 1
Hi Tony. Nice job on the firewall. The bead roller is a very specialized tool, but it does jobs that no other tool can do as well. Making those flanges looked super easy. Merry Christmas!
-mike
Looks as it should, nice, smooth and simple. Great looking work!
Just beautiful ! Good planning makes great results
Love watching these treams. Happy Christmas to you all.
Merry Christmas to you and your family another great stuff
Your bead roller looks like it's working very well, crusty is coming along very quickly, thanks for sharing, Wishing you and your loved ones Merry Christmas, and a healthy and prosperous New Year
Good evening Toni
Merry Christmas and a happy healthy new year.
Thank you for your work .
The tipps were good 😊
Greetings from Germany and the Harz mountains.
Yours Frank Galetzka
Merry Christmas Fitzee my good friend......cheers from Winnipeg 🎅🎄🎅👍🏼👌
Happy holidays!
Looks great Fitz!
Merry Christmas Fitzee..thanks for another great video.
Phenomenal video... thoroughly enjoyable and educational!!
Looking forward to 2024!
Have a lovely Christmas and a happy new year Fitzee!
👍👌
Looks real nice Fitzee old crusty really coming along mate .
Merry Christmas to you and your family and thanks for all the fabulous videos this year have a great one 👍
It’s been another great year of videos on both channels, Merry Christmas and a happy new year to you and Wendy all the best in the new year
Happy Holidays Tony, thanks for all you do. The smallest of techniques I was missing started to come together with your help. Thanks
Happy holidays!
Tony , you make this look so easy 👍
When I built my gasser I drilled holes in the firewall then put plugs in them to get the bellhousing bolts out
Lovely job tony . Merry Christmas to you and yours.
Hey fitzee, that looks amazing and it’s a perfect example for doing a new panel or a repair panel in pieces to get the fitment right. It’s a lot more work but you get a better fit a cleaner look and a nicer design patch to weld it. Also I just want to say merry Christmas and a happy new year to you and your family. Nice job, later
Awesome job nice to see Crusty❤
awesome thank you
Merry Christmas and a happy new year.
Nice work man. Merry Christmas.
Happy holidays!
Nice Work! Tony, looks good ....That fire wall is solid. Cheers Merry Christmas bud...have a good one say hi to all my fellow newfoundlanders will ya.
As always , clever job Tony. Nice tip on inside vs outside lip for us rustbelt folks. Look at Peanut, Hove Off. 🤣
Merry Christmas to you and Wendy and all the family sir, Blair.
Sir, you are to body work what Tommy Silva is to houses on This Old House. Another amazing build.