R/C Garbage Truck Packing!
Вставка
- Опубліковано 28 вер 2024
- The Norba RL35 model performing three compaction cycles, then driving away.
Havn't made any big progress since my last videos. The main difference is that some of the lights are working. Left to build is the container hoist system, and new side panels for the container. Hopefully that will be finished within a few months,, hopefully! ;-)
Most of my components were bought at:
www.fechtner-modellbau.de
They have a lot of good stuff!
Cab, chassis, wheels, tyres, suspension, front axle
Wedico, www.wedico.de
Alternative Cabs:
Bruder Arocs: www.bruder.de
Scale-art MAN TGS or Arocs: www.scaleart.de
Drive Unit
Motor: Servonaut GM32U450: www.servonaut.de
Cardan shafts: Fechtner modellbau.
Rear Axles: www.ruest-feinm... (Out of business?)
Hydraulics
Pump, cylinders, valves, filters, hoses, connections:
www.leimbach-modellbau.de/
I run my system at 15bar. Ø7mm cylinders for tailgate lift, all other cylinders Ø12mm. Pump article nr. H0102.
Electronics
Transmitter: Futaba FC-16 Boat 'n' Truck (Not available anymore)
2.4GHz conversion: FrSky: hobbyking.com/
Reciever: Frsky 8 channel: hobbyking.com/
Speed controller: Servonaut S22: www.servonaut.de
Winch speed controller: CTI Thor4s: www.cti-modellbau.de
Pump Switch: Futaba, but I would recommend using a single direction speed controller instead.
Winch Motor: PGM12L, Fechtner modellbau.
Bodywork
Container Floor, Sides and Roof: 3mm aluminium plate (watercut)
and various aluminium U- and L-beams. Machined and/or cut manually.
Container crossbeams: Aluminium beams 6x10mm and 6x20mm.
Ejector Plate: 1mm steel plate (laser cut), and 6x10mm aluminium crossbeams.
Tailgate Sides: 1mm steel plate (laser cut), and 5mm aluminium plates (water cut and machined).
Tailgate Crossbeams: Various sizes of aluminium beams, machined.
Packer Plate: 12, 5 and 3mm aluminium plates. (Water cut and machined)
Slide Plate: 3mm aluminium plate (watercut) and 10mm aluminium plate (watercut and machined).
For additional info; just ask.
All the way to one and twenty seconds before I realized it was just a model! Amazing!
I just made one like this yesterday but it doesn't have an automated packer and no chassis or cab yet. This truck inspired me to make my own
Awesome, looking better and better. Love the tail lights and the small control console. A driveable replica... without having to touch it =]
Member watching when I was little in 2014
You know that you have been around a while when people actually feel nostalgia watching your videos! :-D
Can't believe how fast the years fly by! Thanks for the comment!
Ya
@@SeRefuseTrucks mkyiuikkui
I remember watching these kinds of videos back when i was a kid, good times
Nice to hear that my videos inspire feelings of nostalgia. Thats got to be some form of success! :-D
I remeber watching this at 3. Memories 😭
Same me bro😭
تنتننةمنثمناوتاتتتخننمح8
@@hairieshah5833 عهانخعاعالع6هتن77هعا7هخهععاخعهع76ت8عن76عن7ن7ع
Great job with this! Now all you need is a waste transfer facility, and you've got both the entire old style "Barbie" and "G.I. Joe" figures trash removal contracts!
Thanks! A transfer facility, with an overhead crane and a compactor would of course be fun. But the space needed for that is a little to large for my current taste. ;)
Ok now i see it Homemade, yuo should start selling them!
LittlePeoplePlay
I want a truck like that all I have is a lego side loader
I buy 1 or 2 perhaps 3 maybe 4 were getting a bit excessive but maybe perhaps 5 this is getting expensive but just maybe 6...
Or more
this can come in handy for keeping your house clean I love it
Nice work man... Does it have an operable eject panel and eject cylinder? Is the hopper/packer designed off of any particular (real) garbage truck body?
Hello friend , it is very cool your truck and my son was crazy about one, in their review saw what was done for you, you agree to share the project this Truck ? as you did the part of brings truck drive system ? Thank you.
w benke Thanks! Not sure that I understand your questions though.. And making drawings for all the parts in this Project would take a lot of time.. Time that I don't Think that I have right now.
Please let me know if there is a way to communicate with you about how much you would want to build and sell a truck comparable to the one in the video. My boys love watching this truck and ask me all the time how can we go about getting one. This is one of a kind and you’re the man that can make it happen.
What do you use to make the little garbage bags?
Unfortunately, there are only single-acting telescopic cylinders in this scale. So I chose to use an ordinary double-acting cylinder instead. The result is the ability to position the unloading plate anywhere I want to, but I can only use about 60% of the body volume. But the 40% in front of the blade is useful for housing valve blocks etc. If I can, I will show this, but it is difficult as the inside of the body is black. The darkness "hides" the components that shouldnt be there irl.
Will you make a different truck once this one is done, like a side loader or front loader?
awesome garbage truck do you have the blueprint and what material is it build of
Materials and components can be found in the video descriptions for my newer videos. Unfortunately I don't have the blueprints.
Because I havn't been totally finished with it. But I will upload new videos next week. And this time I mean it! :-)
That's a great looking Volvo Rear loader garbage truck and its a RC model
Thanks! :)
That would be a really long video. Sorry..
Very realistic and cool !
+rob c. Thanks! =)
That is AWESOME!! How long did it take you to build it?
Thanks! I don't have any exact number of hours. But if the work in cad is included it is a few hundreds of hours.
If I could have had one of these when I was a kid :( In my day the models, even just the plastic toy trucks were quite limted in variety. Never did find an open rear loader.
+fro0tyl0opy87 I was in the same situation. So I started building small lego garbage trucks instead. =)
You Guys are Devils! They Built This RC!
I will, as soon as it is totally finished. I am waiting for the last few parts, and if all works well, it will be finished within a month! :-)
what a gifted builder of this vehicle !!
I like that garbage hopper. Can u show his maximal pressure when garbge is full?
I made a video like that recently. But I filled it up with packing chips.
@@SeRefuseTrucks yee, sure
Neat! Are those actually miniature hydraulic cylinders, worked from a miniature hydraulic pump?
Thanks! :-) Yes they are. The hydraulic system is manufactured by "Leimbach Modellbau" in germany, and I am operating it at a 15bar pressure.
SeRefuseTrucks where did you get that i need it
William H. Jarvis ikjkopoo0
Where do u get this? I really want one.
were did you get the truck?
Homemade to some extent, other parts were bought. Check my newer video descriptions for details.
Where you buy that thing please answer me 🥺 I really like that
So realistic
good job then
Awesome! :P
Nah, it moves about 1/4 of a realistic maximum speed (25km/h if it were full size). And garbage trucks are just as fast as any other heavy truck..
Yes
Wow awesome garbage truck i love it!!! Where did you get it from?
He built it
Dude I am also a big garbage truck fan also nice truck
Thanks! =)
Ä
hey mate ware did you get your rc rubbish truck form mate
? i like it
I never seen this before !
Thanks for taking the time. :-)
I saw a Front Loader garbage truck that looks like a Peterbilt 520 either it's a Amrep Heil McNeilus
A R/C-model front loader?
So cool !!!
Where can I buy this garbage truck to buy?
請問這台垃圾車要去哪邊買才買的到?
請問這台垃圾車大約多少錢?
How much is this garbage truck?
Love it so much
good
epic
Thanks!
@@SeRefuseTrucks you are welcome
I love where did you get it
How much and were at
is it strong enough to take a finger like the power of it?
+Aidan Dunn The packer moves downwards with a force of approximately 30kg, and the packer edge is quite Sharp. So I wouldn't rule out the possibility that it can cut of a finger. It would at least result in pain and probably bloodshed.
well I figured the finger cutting I'm talking about the amount of pressure cause it looks pretty serious of a truck!
Is there any trucks like this to purchase. My nephew really wants a trash truck that does exactly what this one does.
Unfortunately no, there are no comparable trucks on the market. The closest thing would be the Haller X2 rear loader from bruder.
can I buy it
What a load of trash no. You need to make it
Can i buy somewhere?
Very realistic this hydraulic cylinder…
It is homemade!
It’s really good!
Nice !
where you get this truck
Remember when I was 5 yrs old and I was scared about this big ass garbage truck
Где такой купил
Was the refuse body and packer blade crafted by hand?
Jason Leonard Yes, or sort of... Lasercutting, watercutting, milling drilling etc.
where did you have this built? My Husband wants one.
+Ariel Pulliam It is homemade. Some parts can be bought (hydraulics and drive line), but the bodywork and the short version of the cab is homemade.
WHERE CAN I GET ONE???????
Where can I buy thos thinf
Do you still have the lego one?
oh wow it is a old volvo f12 intercooler
+Vintage toys-melbourne australia-victoria Indeed it is. =)
Awesome
That would look really good in my truck club is it 1/14
Mi puoi dire il nome di questo camion
How did you make the trash sacks.
+Lucas Mead Sorry for the late answer. They are made from plastic foam (like the foam in mattresses) wrapped in plastic from small trash bags. the plastic is then tied together with a string at the top. The foam allows them to be compressed, and then regain their original form when dumped out of the truck.
Nevermind
Where did you get your truck? Awesome
Thanks! It is homemade, and I have uploaded videos that provides more info!
where did you get it from or is it custom
+Alfie Whittaker It is homemade. Some parts can be bought (hydraulics and drive line), but the bodywork and the short version of the cab is homemade.
Nice 👍
I really want one where does it sell in New York city
Nice
how did you make the packer work like that?
Exitsigncollection Hi, It is hydraulically powered. The system runs at 15bar and the Components can be found at Leimbach Modellbau.
AWSOMEEEE I WANT ONE OF THEESE PLEASE TELL ME WHERE I CAN BUY ONE PLEASE MONEY IS NOT A PROBLEM!!!!!!!!
Made it himself. U can't buy it :/
were can i get one of those
Wow
where did you find that
HardHit Gaming It is homemade.
Jim
very cool
這是什麼玩具??
What are those kind of garbage trucks called in real life
It is called a "rear loader".
how do i purchase one?
original hidraulic ?
Could you clarify that question?
Míos. Míos. Míos
I want one ☝️
Red balloon bral email n
where can i get 1
Do you know if anyone sells a similar truck that automatically compacts garbage? My son wants one for Christmas and I cannot find one to save my life! Any help is appreciated.
+Steven Rhodes Hi,The closest thing I can think of are the rear loaders from Bruder. Especially article no: 03560. The packer actually works fairly realistic in those trucks.If you want anything on the same level as the truck that I have built, I am sorry to say that there is nothing on the market.
SeRefuseTrucks u
it would be really cool if you made instructions of it. You don't have to, just saying :)
WHERE CAN I BUY THIS FROM, IT IS GREAT
ايش يعني
he built it by himself
Why not you make a mini couch and crush it in the garbage truck
I have actually thought about it. Could be a nice idea for another video. =)
這去哪裡買
I want one asap
where can I find and purchase one
DANIEL
Dove si può comprarlo buy ?
Non si puo
I am you biggest fan
Thanks! =)
We're to get one
great rc R L GARBAGE TRUCK wish you can make me one serefues trucks ;)