Multipitch Rescue Part 1: Getting to Baseline

Поділитися
Вставка
  • Опубліковано 26 лип 2024
  • This video shows how to get from belaying two climbers on an ATC to baseline. Baseline is the starting point for most rescue systems including hauls, lowers, rappel, etc. This is useful in multipitch climbing, single pitch climbing, climbing outside, lead climbing, and trad climbing. Jason Schmaltz is an AMGA Rock Guide Apprentice and very knowledgeable on multipitch rescue.
    #climbing #rescue #multipitch
  • Навчання та стиль

КОМЕНТАРІ • 22

  • @armandmatossian2081
    @armandmatossian2081 Рік тому +10

    Wow great idea to use a resistance band to simulate climbers weight. So good!

    • @summitseekersexperience
      @summitseekersexperience  Рік тому +2

      Right... try to get me to use them for what they were intended for though and you'll be waiting around a while ;-)

  • @vinceburris2538
    @vinceburris2538 Рік тому +2

    Great instructional video. Can't wait for part 2. Thank you for sharing your knowledge with us.

  • @joshb693
    @joshb693 Рік тому

    Super cool series, thanks for this info!

  • @AndTSG
    @AndTSG Рік тому +2

    5k now 50k shortly! Keep up the great content

  • @tadeasulrich2946
    @tadeasulrich2946 10 місяців тому

    So awesome series, thanks so much chief

  • @nolanzorn6820
    @nolanzorn6820 4 місяці тому

    Such a good video, keep it up!

  • @gulaiymnurbolotova986
    @gulaiymnurbolotova986 11 місяців тому

    Great idea to use. Thanks

  • @johnsoplete
    @johnsoplete Рік тому +1

    I put the ATC before pulling up the rope so i minimize the time the followers are not on belay since the moment they feel the rope pulling. Its good if the communication is poor to just have them on belay as fast as possible and putting the ATC before saves time (specially if you have a lot of gear to shuffle to get the the plate)

  • @user-hl8pw1jd9z
    @user-hl8pw1jd9z 6 місяців тому

    Thanks for the great explanation!
    Why do you release the mmo of the klemmheist sling before you untie the mmo of the rope? I wonder if you could take out the rope´s slack first and then untie the sling.

  • @MichaelGannon2024
    @MichaelGannon2024 3 місяці тому

    loving the videos! is there a video in your series that describes the procedure mentioned for rappel of the back of the baseline?

    • @summitseekersexperience
      @summitseekersexperience  3 місяці тому

      Yeah, just look at this rescue series playlist… I can’t remember which it is, but I did make a video on this scenario

    • @MichaelGannon2024
      @MichaelGannon2024 3 місяці тому

      @@summitseekersexperience I think I spotted it ua-cam.com/video/USmVqcyYkPM/v-deo.html seems like the hot tip is isolate the climbers system with a clove and perform a single strand rappel down to them

  • @braydenpeterson6784
    @braydenpeterson6784 Рік тому +2

    Very interesting, any particular reason as to not take the slack out ahead of the munter for the injured climber prior to releasing the klemheist?

    • @summitseekersexperience
      @summitseekersexperience  Рік тому

      You could but it would add the extra step of undoing the MMO, milk the munter, then redo the MMO only to save lowering the climber roughly a foot or two... but if the situation called for that action, then yes, you could do that.

  • @ianclimbs
    @ianclimbs 10 місяців тому

    Could you kleimheist around both load strands if you wanted?

  • @adivladi
    @adivladi Рік тому

    THIS IS THE NEW VERSION OF SITTA ?

  • @clairm11
    @clairm11 8 місяців тому

    Thanks for the video. Why use MMO instead of clove hitch? Is it because it will be more easy if we want to reinstall the reverso?

    • @summitseekersexperience
      @summitseekersexperience  8 місяців тому

      If you weighted the clove you would be stuck and unable to do anything else. The mmo provides options for lower, haul, or belay.