This sequence helped me: 1. Unplug the machine in power on state 2. Open the capsule lever 3. Hold the espresso (first button) and last buttons and plug it on back then while holding the buttons ( this will turn into entkalking mode) close the capsule lever and wait for it to flash once red then orange and an audible beep. 4. Release the buttons and then press any button, water will running and after some while all buttons will flash - water boiling is working again. Wait until buttons stop flashing. 5. Power of and power on the mashine
Hello, to everyone who did not get any solution, I managed to fix mine after almost 3 years. It is a very simple fix but you need basic tools to open up the machine and fix the pump. I have explained more my video ua-cam.com/video/4KB_sgmPWto/v-deo.html
Just fill in your tank with water. Power on the machine. While the red light flashing and beep sound is continuing, press the espresso button once and wait for the pump to fill the machine and water to come out. After then, all the lights will flash then will stay lighted as normal. Thats all.
I had the same problem i fixed it with the following 1. Power off the machine 2. Open the capsule lever 3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep 4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
Try it @danidani dani solution... 1. Power off the machine 2. Open the capsule lever 3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep 4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
I had the same problem, and in my case the sensor of the capsule lever opener was not working properly. Like in this video at 5:14: ua-cam.com/video/txBClaLKe7w/v-deo.html I curved the metal a bit and now it is working normally.
Salutare Am 2 aparate cu același sintome..... O sa o iau logic dacă nu e pompa e posibil sa fie înfundat pe undeva... O sa continui cercetarea dacă reușesc o sa va dau de stire
@@Cristaina90 ...inclin sa cred ca este o problema de soft...de la partea electronica Cei de la Tchibo nu mi-au raspuns la email, poate apare cineva cu o solutie...
@@Cristaina90 am avut si eu exact aceiasi problema, am urmat pasii din acest video chiar daca sunt putin diferite aparatele. S-a rezolvat! ua-cam.com/video/4r4qqT-f1PU/v-deo.html Ps: cred ca ideea ca sa inceapa decalcifierea si clatirea e ca rezervorul de apa sa fie umplut exact pana unde scrie Max.
Salut! Mie îmi curge cafea direct in recipientul de scurgere...ma poate ajuta cineva cu un sfat sau știți cu cine ar trebui sa iau legătura ca sa rezolv problema? Mulțumesc anticipat!
Try it @danidani dani solution... 1. Power off the machine 2. Open the capsule lever 3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep 4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
Virgil... inca aștept și eu, este o eroare ciudată și cu sfaturile din manual nu se rezolva nimic... Le-am scris și nemților de la Tchibo, dar momentan nu mi-au răspuns... Dacă aflu ceva te anunt, aștept și de la tine semn...
@@Danny22tm am avut si eu exact aceiasi problema, am urmat pasii din acest video chiar daca sunt putin diferite aparatele. S-a rezolvat! ua-cam.com/video/4r4qqT-f1PU/v-deo.html Ps: ca sa inceapa decalcifierea si clatirea, rezervorul de apa trebuie sa fie umplut exact pana unde scrie Max.
Since I had the same problem and nothing in these comments has helped - this is how it worked for me: 1. The machine is turned off and the capsule lever is closed 2. Press the espresso button and hold it. 3. While holding it, turn on the machine. 4. Let go of the espresso button. 5. The three buttons in the middle should blink. 6. When they’re done blinking you can open the capsule lever, insert the capsule, close it and press a cup button accordingly to your capsule.
It helped me also !! During blinking (5 point) you can open a lever. I think It helped just like turn off, turn on and open a lever during blinking ;) thank you
Hi ! I have the same problem (( but my capsule is inside and I even can’t open the lever And when I press any button it still red flashing and nothing happens Maybe you know the solution for that?
This sequence helped me:
1. Unplug the machine in power on state
2. Open the capsule lever
3. Hold the espresso (first button) and last buttons and plug it on back then while holding the buttons ( this will turn into entkalking mode) close the capsule lever and wait for it to flash once red then orange and an audible beep.
4. Release the buttons and then press any button, water will running and after some while all buttons will flash - water boiling is working again. Wait until buttons stop flashing.
5. Power of and power on the mashine
Thank you
Thank you ! That’s worked
Thank you very much. Works like a charm
Teşekkür ederim. = Thank you.
Hello, to everyone who did not get any solution, I managed to fix mine after almost 3 years. It is a very simple fix but you need basic tools to open up the machine and fix the pump. I have explained more my video ua-cam.com/video/4KB_sgmPWto/v-deo.html
Ok I have same problem and what is the solution
Luft in der Leitung. Größte Tasse gedrückt halten bis Wasser kommt
Wie? Es geht nicht
Just fill in your tank with water. Power on the machine. While the red light flashing and beep sound is continuing, press the espresso button once and wait for the pump to fill the machine and water to come out. After then, all the lights will flash then will stay lighted as normal. Thats all.
it didn't work
It works for me thanks
It also worked for me🤗thanks
Press for ideally how long?
@@whyArnold about 2 seconds
I also have the same problem plus I received my machine without little filter inside water tank 😡😡😡
for me was a broken pump, u replace and works, you find cheap on ebay.
I follow the instructions but the water comes out where the waste should fall
Contor volumetric it s is the problem-solved
How did you solve the problem?
Jusy press the large cup and take the water tank in and out while the machine is working. It sucks out the air and pulls the water. Worked for me
TREBUIE DECALCIFIANT eu am facut cu otet si mi-a facut traba buna.
Thank its work now
I had the same problem i fixed it with the following
1. Power off the machine
2. Open the capsule lever
3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep
4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
Hello friend and thanks for the reply
Is it the same model as in my video?
@@Danny22tm yes
Thanks -helped :) Cafissimo type 313212
.
Oh God İ have the same problem and İ applied every stage up there. Still it doesn't work. It just cannot take the water in the store.
solve prolem: it s VOLUMETRIC CONTROL deffect
Has anyone solved the problem?
Try it @danidani dani solution...
1. Power off the machine
2. Open the capsule lever
3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep
4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
@@Danny22tmI follow the instructions but the water comes out where the waste should fall
Press, up and down button same time
I had the same problem, and in my case the sensor of the capsule lever opener was not working properly.
Like in this video at 5:14:
ua-cam.com/video/txBClaLKe7w/v-deo.html
I curved the metal a bit and now it is working normally.
Thank you, friend !🤗
Aceeași problema am si eu, dar nu se poate decalcifia😢
Aynı sorun bendede var nasıl çözdünüz
Büyük bardak secimine basili tutun su gelicek düzelene kadar sonra normal moduna geri dönüyor
Sorununuz çözüldümü acaba ne yaptıysam olmadı
Sorunu çözdünüz mü? Benim makinada aynı sorunu verdi ne yaptıysam olmadı yardımcı olur musunuz
Bună, la mine nu se ridica clapeta sii intermitent culoarea rosie,daca aveti un sfat pentru mine, mulțumesc frumos
I didn't thought it would work, but it did!
Ați găsit rezolvare?
Trebuie facuta procedura de decalcifiere
ua-cam.com/video/-GcascGnQaU/v-deo.html
Salutare
Am 2 aparate cu același sintome..... O sa o iau logic dacă nu e pompa e posibil sa fie înfundat pe undeva... O sa continui cercetarea dacă reușesc o sa va dau de stire
Salutare, eu am aceeasi problema cu Cafissimo Mini. Ati gasit deja solutia? Daca da, va rog ajutati-ma si pe mine cu un sfat. Multumesc anticipat!
@@Cristaina90 ...inclin sa cred ca este o problema de soft...de la partea electronica
Cei de la Tchibo nu mi-au raspuns la email, poate apare cineva cu o solutie...
@@Danny22tm multumesc mult pentru raspuns
@@Cristaina90 am avut si eu exact aceiasi problema, am urmat pasii din acest video chiar daca sunt putin diferite aparatele. S-a rezolvat! ua-cam.com/video/4r4qqT-f1PU/v-deo.html
Ps: cred ca ideea ca sa inceapa decalcifierea si clatirea e ca rezervorul de apa sa fie umplut exact pana unde scrie Max.
Și eu am avut aceiași problema tine apăsat pe Ceașca mare de cafea pana când cure apa și după o sa își revină la normal ☺️
Salut! Mie îmi curge cafea direct in recipientul de scurgere...ma poate ajuta cineva cu un sfat sau știți cu cine ar trebui sa iau legătura ca sa rezolv problema? Mulțumesc anticipat!
press the middle button hard and wait 15-20 seconds
Rezolvarea?aceeasi problema o am si eu cu al meu!
Wasted my time
Try it @danidani dani solution...
1. Power off the machine
2. Open the capsule lever
3. Hold the espresso and medium buttons and power it on then while holding the buttons close the capsule lever and wait for it to flash once red then orange and an audible beep
4. Release the buttons and then press and hold the espresso button till the coffee buttons start flashing (water may come out so place a container to catch it, then release the button and the machine starts to heat up.
@@Danny22tm aynı adımları tamamlıyorum ve su gelmiyor sorun ne olabilir ?
Virgil... inca aștept și eu, este o eroare ciudată și cu sfaturile din manual nu se rezolva nimic...
Le-am scris și nemților de la Tchibo, dar momentan nu mi-au răspuns...
Dacă aflu ceva te anunt, aștept și de la tine semn...
Salutare, eu am aceeasi problema. Ati gasit deja solutia? Daca da, va rog ajutati-ma si pe mine. Multumesc anticipat!
Rezolvat
Era CONTORUL VOLUMETRIC
@@virgilbusa729 ...ne poti da mai multe detalii ? care e acel CONTOR VOLUMETRIC si cum ai rezolvat ? multumim anticipat...
Daniel Salut! am si eu o problema similara cu a ta . Ma ajuti te rog daca ai o rezolvare ? Multumesc!
@@Danny22tm am avut si eu exact aceiasi problema, am urmat pasii din acest video chiar daca sunt putin diferite aparatele. S-a rezolvat! ua-cam.com/video/4r4qqT-f1PU/v-deo.html
Ps: ca sa inceapa decalcifierea si clatirea, rezervorul de apa trebuie sa fie umplut exact pana unde scrie Max.
Since I had the same problem and nothing in these comments has helped - this is how it worked for me:
1. The machine is turned off and the capsule lever is closed
2. Press the espresso button and hold it.
3. While holding it, turn on the machine.
4. Let go of the espresso button.
5. The three buttons in the middle should blink.
6. When they’re done blinking you can open the capsule lever, insert the capsule, close it and press a cup button accordingly to your capsule.
Thank you, Sophia !
It helped me also !! During blinking (5 point) you can open a lever. I think It helped just like turn off, turn on and open a lever during blinking ;) thank you
Thanks, it‘s very helpfully
Hi ! I have the same problem (( but my capsule is inside and I even can’t open the lever
And when I press any button it still red flashing and nothing happens
Maybe you know the solution for that?
@@РивкаСызранцева maybe red flashing is caused by sediment stone? You should buy a special detergent for that.
Red and yellow blink alternately on my machine.
What is the problem?
unstone it