I do love just by putting in the key blank you knew the key bitting for that lock. You can tell you been doing this awhile just to eyeball that. Great job.
I work for Amazon doing deliveries right now. I run my own lawn care business on the side (3 years now) and it’s only 6 months during the season so I’ve been trying to think what else I can do. This seems very intriguing…. I’m looking to put growth into my life instead of working for someone else. I think I found the answer. Thank you.
I'm taking it you have had some bad experiences considering i seen you do a walk through the whole house to make sure no one was in there. lol Good job by the way buddy.
When I get a new monitor with smelloview support, I will get the full out of those vacant rekey videos. This one didn't look so bad, but vacant places always have that magic smell them locksporters miss out on, when sitting at home opening locks in the vise
Just a question: is there a reason you didn't just replace the tail piece? Was it just a temp thing so the owner, (bank or who ever), could get in and then change out the locks later? Or did he not want to spend the $$ for something like that? Thanks.
Charlie Blum also after repairing the cause of the twisted tailpiece (shifted foundation causing strike misalignment, its very common with our soil) the repaired locks will work fine anyway. Until it shifts majorly again that is
Hello I'm starting a locksmith business in New Mexico. I was wondering if you would let me know about what you charge companies to do a job like this one. and how much it differs from a rekey job for an individual. thank you for the info.
Thanks for the ride along. Sorry I got motion sickness in the van. It's just a small puddle. I know it looks like oatmeal. But it's not. Actually I don't really know what it is. Ding dangit.
Hello! My name is Erli, but you can call me Lee. I am a handy man who also works on cars. Lately, I have developed the idea of becoming a modern car locksmith- well, you probably realized that I am totally lost. Please answer me this question for I am also interested to take your course and need your persoal opinion. Erli S. Bittencourt
C Riley mostly only on older commercial buildings (like pre 80’s) (not counting like Mortise Locks on Business Doors) We have a lot of homes built in the 50-60s that did use Schlage D series which is grade 1 knobs but those are typically in the older wealthy parts o town :)
What if you want a Master key to work all locks in a building and then you have "A" key to work every lock in the building except the Master Lock. Then you need a "B" key to work every lock in the building except "A" and Master locks and finally a "C" key to work only "C" locks? How the heck do you pin this?! Thanks!
# -- keyblank -- pinning -- key cuts AAX (Sc4 xxx3^2^2^2 3^2^2^2 x) xxx77x ABX (Sc4 xxx3^2^4 3^2^4 x) xxx33x ACX (Sc4 xxx5^4 5^4 x) xxx99x then A (Sc4 xxx55x will work all of them.. not the correct way to write it but we don't really have graph paper here to write out a constant progression system. you could also do something with multilock's 3in1 system, or schlage's construction balls -- then again maybe I misread your intentions..
john garcia it did! Sometimes snapping your fingers to get things done just don’t work. I might humbly add, many of my videos are long so if you don’t care for long videos, our channel probably isn’t the best. Thanks for your encouraging words! Have a absolutely GREAT day
I do love just by putting in the key blank you knew the key bitting for that lock. You can tell you been doing this awhile just to eyeball that. Great job.
I work for Amazon doing deliveries right now. I run my own lawn care business on the side (3 years now) and it’s only 6 months during the season so I’ve been trying to think what else I can do.
This seems very intriguing….
I’m looking to put growth into my life instead of working for someone else.
I think I found the answer.
Thank you.
what I do everyday lol... see twisted tailpiece often and those bolts are crap... had 1 today that failed and had to open door...
That was a fun ride along. thanks for taking the time to make the video!
Sure would be nice to know what you were doing? Spray type, pick type, bump keys?
Let me go back and update this 6 year old video just for you
Wow lil sour attitude 👎🏻 to someone who may have just ran across the video
I'm taking it you have had some bad experiences considering i seen you do a walk through the whole house to make sure no one was in there. lol Good job by the way buddy.
Front door deadbolt picked clockwise and then a spinner? Are deadbolts tough to pick in their opposite unlock direction?
When I get a new monitor with smelloview support, I will get the full out of those vacant rekey videos. This one didn't look so bad, but vacant places always have that magic smell them locksporters miss out on, when sitting at home opening locks in the vise
Awesome video
Just a question: is there a reason you didn't just replace the tail piece? Was it just a temp thing so the owner, (bank or who ever), could get in and then change out the locks later? Or did he not want to spend the $$ for something like that?
Thanks.
Charlie Blum yep $$ only replace when totally broken per every house for this company
Charlie Blum also after repairing the cause of the twisted tailpiece (shifted foundation causing strike misalignment, its very common with our soil) the repaired locks will work fine anyway. Until it shifts majorly again that is
Hello I'm starting a locksmith business in New Mexico. I was wondering if you would let me know about what you charge companies to do a job like this one. and how much it differs from a rekey job for an individual. thank you for the info.
Good video
Hey sir just curious do you got a .003 pinning kit. Or .005? And why do you pick the one you do? Thanks for any help
must be interesting to be locksmith in a country where raking is possible. No letterbox tool, pickgun og carbide bits
WoW This Guy Looks Just Like Jason From SE Lock And Key. 👍
Why don't you use an E-pick or bump key. Would be a lot faster.
A Sheriff would never wait that long during an eviction.
Thanks for the ride along. Sorry I got motion sickness in the van. It's just a small puddle. I know it looks like oatmeal. But it's not. Actually I don't really know what it is. Ding dangit.
Matrix Jason returns
why do you hold lock out and back lock the same door?
nothing like doing a vacant....
Sorry if I missed it but did you repin the locks or use a premade key to match original pinning?
Repinned the locks :) thanks for watching!
Hello! My name is Erli, but you can call me Lee. I am a handy man who also works on cars. Lately, I have developed the idea of becoming a modern car locksmith- well, you probably realized that I am totally lost.
Please answer me this question for I am also interested to take your course and need your persoal opinion. Erli S. Bittencourt
For a “Locksmith”, you sick at picking.
Wow bro you rock
bump keys 👍
Gaz uk hell ya.😋🤣
Defiant locks are total garbage & banks are some of the cheapest customers around...
you ever run into grade 1 hardware down in Jackson MS??
C Riley mostly only on older commercial buildings (like pre 80’s) (not counting like Mortise Locks on Business Doors)
We have a lot of homes built in the 50-60s that did use Schlage D series which is grade 1 knobs but those are typically in the older wealthy parts o town :)
What if you want a Master key to work all locks in a building and then you have "A" key to work every lock in the building except the Master Lock. Then you need a "B" key to work every lock in the building except "A" and Master locks and finally a "C" key to work only "C" locks? How the heck do you pin this?! Thanks!
Eric Downs upgrade to access control instead
# -- keyblank -- pinning -- key cuts
AAX (Sc4 xxx3^2^2^2 3^2^2^2 x) xxx77x
ABX (Sc4 xxx3^2^4 3^2^4 x) xxx33x
ACX (Sc4 xxx5^4 5^4 x) xxx99x
then A (Sc4 xxx55x will work all of them..
not the correct way to write it but we don't really have graph paper here to write out a constant progression system.
you could also do something with multilock's 3in1 system, or schlage's construction balls -- then again maybe I misread your intentions..
my s6 takes better vids
Took long enough
john garcia it did! Sometimes snapping your fingers to get things done just don’t work. I might humbly add, many of my videos are long so if you don’t care for long videos, our channel probably isn’t the best. Thanks for your encouraging words! Have a absolutely GREAT day