SUNSUN HBL 802 (801 / 803) external hang on filter unboxing and installation with Subtitle

Поділитися
Вставка
  • Опубліковано 2 лис 2024

КОМЕНТАРІ • 47

  • @karkoor
    @karkoor 3 роки тому +3

    Brilliant mini canister filter !

  • @akashamandap6864
    @akashamandap6864 2 роки тому +2

    Why sunsun fikter are working fine on videos how to set up. Mine not totally working

  • @75arachnid
    @75arachnid 2 роки тому +2

    does the inlet water goes down first or gets filtered from top to bottom?

  • @abdullazahid7843
    @abdullazahid7843 2 роки тому

    What about the compartments does it works when it’s empty or do I need to put control and other stuff in compartments ? I have one but not sure how to use it

  • @TheVoyagers.
    @TheVoyagers. 2 роки тому +1

    At 1:27 instead of using the extended tube, can I just connect the bottom bit to the top as my tank isn’t that high only like 10cm

  • @Ttblondey
    @Ttblondey 4 роки тому +1

    Thanks. It's good for 90cm tank

  • @romanschwartz9453
    @romanschwartz9453 3 роки тому

    I purchased 2 Sunsun HBL 801. Have had them for a month in my 20L and 36L tanks. They are doing a great job, BUT they both keep taking in air. You can clearly see bubbles in the bends of the translucent inflow and outflow pipes. The filter makes annoying burping sound and has outbursts of air into the tank quite often. I really do not know where the air finds its way in, but my only guess is the knobs for flow regulation. I have used vaseline to try and seal the space between the canister and the cover, also used vaseline to seal the threads on the ring screws where the inflow and outflow pipes connect to the canister. It hasn't helped. Today I tried to seal of one of the knobs, the one on the inflow pipe. I either did not do a good job or the leak is elsewhere. Anyone with the same experience? Any ideas on how to fix this?

    • @premierplants9447
      @premierplants9447  3 роки тому

      Unscrew the inlet and outlet pipe fill the water till its overflow, so no air might be filled. Next screw them and start the motor and check.

    • @romanschwartz9453
      @romanschwartz9453 3 роки тому

      @@premierplants9447 done that, several times. Not working.

    • @amycroft7545
      @amycroft7545 2 роки тому

      Mine has 3 days with me and it's acting up just like that! It´s driving me insane. Because each time I turn it on, i have to put water inside, just a little. Did you get yours fixed?

    • @MAiman-uy6bz
      @MAiman-uy6bz 2 роки тому

      @@amycroft7545 heyy any solution??

    • @amycroft7545
      @amycroft7545 2 роки тому

      @@MAiman-uy6bz with the light I could see that there was a tiny tiny hole in the pipe. Ducktape did the job

  • @pikangswang980
    @pikangswang980 3 роки тому

    How long adjuster clamps? Bcs my tank have a list mirror

  • @yuvarajr114
    @yuvarajr114 4 роки тому +1

    Very helpful

  • @reejajacob8429
    @reejajacob8429 3 роки тому

    How's it after running few months?
    Does it get enough flow

    • @premierplants9447
      @premierplants9447  3 роки тому +2

      i am Using four 803 HBL and two 802 Hbl hanging filters for past 2 years. Its really superb.

  • @bideshtube
    @bideshtube 3 роки тому

    Does it prime itself when power goes

    • @premierplants9447
      @premierplants9447  3 роки тому

      Yes it is designed for auto suction.

    • @rocksteady112
      @rocksteady112 2 роки тому +1

      No it doesnt!! it is the only drawback other than that perfect filtering ability with lots of filter media space. after 3 years of usage mine got wasted because of dry run. But even I cannot find a replacement for it. I will buy a similar filter anyway :)

  • @mohanmahindra4885
    @mohanmahindra4885 2 роки тому +1

    Not shown media cartridge how to dismantle and asseble

    • @premierplants9447
      @premierplants9447  2 роки тому

      About media, dismantle and Maintenance explained in this video
      ua-cam.com/video/iFtXbH87A1I/v-deo.html

  • @bdg7177
    @bdg7177 3 роки тому

    does it collect a lot of feces from the fish?

  • @alfofish2811
    @alfofish2811 4 роки тому

    we change motor if it stop working

  • @kunalsingh650
    @kunalsingh650 3 роки тому

    can we mount this on wall?

  • @rafaelcandidoribeiro5104
    @rafaelcandidoribeiro5104 4 роки тому

    Posso usar esse filtro em um aquário de 200 litros

  • @Davideprima
    @Davideprima 3 роки тому

    Is the HBL 802 noisy?

  • @vickys.m.1173
    @vickys.m.1173 3 роки тому

    Can we hang this inside the tank rather than outside?

    • @premierplants9447
      @premierplants9447  3 роки тому

      No sir. It was not designed to be immersed. Many motors like Jeneca 5 were designed to hang inside.

    • @vickys.m.1173
      @vickys.m.1173 3 роки тому

      @@premierplants9447 thanks for your reply!!!! I actually kept it inside the tank. Its working fine as of now. But im just worried in the long run.

    • @premierplants9447
      @premierplants9447  3 роки тому

      How does it works ?

    • @vickys.m.1173
      @vickys.m.1173 3 роки тому +1

      @@premierplants9447 works completely fine 😂

  • @graziellacroce4795
    @graziellacroce4795 3 роки тому

    come posso fare per acquistarlo e il prezzo grazie
    hbl 802

  • @sridharcardio8711
    @sridharcardio8711 4 роки тому

    for 100 litres water capacity which model is best?

    • @premierplants9447
      @premierplants9447  4 роки тому

      Hbl 801

    • @kunalsingh650
      @kunalsingh650 3 роки тому

      @@premierplants9447 sir i have 2 feet*1*1 tank which model should i buy also glass thickness is 5mm

  • @arsenioseslpodcast3143
    @arsenioseslpodcast3143 2 роки тому

    It's trash. Buy another filter. This chinese junk came broken

  • @FarizMammadov-qw8rc
    @FarizMammadov-qw8rc 11 місяців тому

    Baskets hard open. Dislike this filter.