Are you looking to get more air into your Harley Davidson to get the maximum output in terms of horsepower and torque?...then check this out and learn about the Screamin Eagle Wedge Extreme Breather and how to install it. It is a great upgrade over that stock breather system. The Extreme Wedge is for the Harley Davidson M8 motors and will increase air flow by up to 22%...more air...more horsepower. If you got value out of this video, give is a thumbs up, share it with others, comment below and subscribe to the channel if you haven't already done so. When you do subscribe, leave a comment below stating "I Subscribed" so I can reach out and thank you for your support. Ride safe and enjoy. Rick HDVIBE
Thanks for watching and commenting. I appreciate your kind words. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️
Reading reviews on HD website, a lot of people complained about the Screaming Eagle emblem falling off of the air filter cover. Keep us posted if that happens to you. Overall, great easy installation video👍🏾
Thanks for watching and commenting. Sounds like a great build. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️
Thanks Sam for watching and commenting. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
Hello, I'm actually thinking about this exact air cleaner on my screaming eagle131. My question is, did you see a significant improvement from the ventilator filter? Oh, I subscribed.
Thanks for watching, commenting, and subscribing. I can't say with I've noticed significant improvement, but I know it's definitely getting much more air into the bike. More air equals more power. I'm sure if it went on a dyno you would see improvement. I'd definitely think this would be a great set up for your 131. You need good air flow on that build. Ride safe and enjoy. ✌️👊👍
Thanks Scott. No problem with leg or knee hitting this one. It's narrow toward the back and wider in the front we'll beyond where your knee would rest. 👊✌️👍
Thanks for this video! I’ve been looking for something to spend my Harley points on this may be it. Hopefully they have black ones for the blacked out bikes.
Thanks for watching and commenting. The wedge extreme would be an excellent intake for a 131 engine. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
what was your throttle body? 64mm? shouldnt the diameter on the wedge backing plate be 68mm? so shouldn't there be a step between the 68mm backing plate and 64mm throttlebody?
Thanks for watching. I still have the stock throttle body on my bike so I believe it is a 55 mm. As for your question, I really can't answer that one. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍
@HDVIBE thanks for the quick reply, surely if 55mm meets a 68mm diameter then there would be a step, any chance you could measure that hole on the backing plate for me that meets the throttlebody opening?
Thanks Austin for watching and commenting. I appreciate the offer. I'll be keeping the stock unit if I ever decide to change it back should I trade or sell the bike. 👊✌️👍
Thanks for watching and commenting. Unfortunately this breather style and kit is only available for the M8 motors. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
Are you looking to get more air into your Harley Davidson to get the maximum output in terms of horsepower and torque?...then check this out and learn about the Screamin Eagle Wedge Extreme Breather and how to install it. It is a great upgrade over that stock breather system. The Extreme Wedge is for the Harley Davidson M8 motors and will increase air flow by up to 22%...more air...more horsepower.
If you got value out of this video, give is a thumbs up, share it with others, comment below and subscribe to the channel if you haven't already done so. When you do subscribe, leave a comment below stating "I Subscribed" so I can reach out and thank you for your support.
Ride safe and enjoy.
Rick
HDVIBE
Great video. Good lighting, clear and concise instructions, just what I needed! Thank you.
Thanks for watching and commenting. I appreciate your kind words. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️
Reading reviews on HD website, a lot of people complained about the Screaming Eagle emblem falling off of the air filter cover. Keep us posted if that happens to you. Overall, great easy installation video👍🏾
Thanks for watching and sharing that information. I'll follow up if that happens on mine. Ride safe and enjoy. 👊✌️👍
I kept the extreme ventilator with my 131” build and just added an STFU filter and I’m the only bike they dynod with that filter. Made 153hp.
Thanks for watching and commenting. Sounds like a great build. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️
I'm going to put this on my bike. Thanks for the video!!
Thanks Sam for watching and commenting. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
That’s a great looking breather. I have a new one on the way right on. Great video
Thanks Kelly for checking it out. Ride safe and enjoy. 👊✌️👍
That looks great! Great install 🤙
Thanks man. Much appreciated. 👊✌️👍
Hello, I'm actually thinking about this exact air cleaner on my screaming eagle131. My question is, did you see a significant improvement from the ventilator filter? Oh, I subscribed.
Thanks for watching, commenting, and subscribing. I can't say with I've noticed significant improvement, but I know it's definitely getting much more air into the bike. More air equals more power. I'm sure if it went on a dyno you would see improvement. I'd definitely think this would be a great set up for your 131. You need good air flow on that build. Ride safe and enjoy. ✌️👊👍
Great looking air intake, should let a lot of air into the engine 👍👍
Thanks Darrell for watching and commenting. I appreciate your continued support. 👊✌️👍
looks awesome. wondering if your leg/knee hits this breather
Thanks Scott. No problem with leg or knee hitting this one. It's narrow toward the back and wider in the front we'll beyond where your knee would rest. 👊✌️👍
Thanks for this video! I’ve been looking for something to spend my Harley points on this may be it. Hopefully they have black ones for the blacked out bikes.
Thanks for watching and commenting. They do have this breather kit in black as well. Thanks for your support and ride safe. 👊✌️👍
Cool looking breather!...does it come in a black frame as well!?...nice easy ad-on!...thanks for sharing....stay safe out there!!😎👍🤙👍🤙🇨🇦
Thanks for watching. It does come in black as well. Ride safe and enjoy. 👊✌️👍
You think this intake would be good with the 131 engine?
Thanks for watching and commenting. The wedge extreme would be an excellent intake for a 131 engine. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
what was your throttle body? 64mm? shouldnt the diameter on the wedge backing plate be 68mm? so shouldn't there be a step between the 68mm backing plate and 64mm throttlebody?
Thanks for watching. I still have the stock throttle body on my bike so I believe it is a 55 mm. As for your question, I really can't answer that one. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍
@HDVIBE thanks for the quick reply, surely if 55mm meets a 68mm diameter then there would be a step, any chance you could measure that hole on the backing plate for me that meets the throttlebody opening?
Hey Rick if you’re looking to get rid of the stock 114 air cleaner let me know I’m looking for one
Thanks Austin for watching and commenting. I appreciate the offer. I'll be keeping the stock unit if I ever decide to change it back should I trade or sell the bike. 👊✌️👍
Do they make this setup for the Twin Cam?
Thanks for watching and commenting. Unfortunately this breather style and kit is only available for the M8 motors. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
Good stuff!
Thanks for checking it out. 👊✌️👍
👍✌️
Thanks for watching and commenting. 👊✌️👍