Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE. Gary De La Cruz
Looks like that CV seal is starting to leak, from the oil mist on the metal. Often you get a belt routing diagram under the bonnet, either stuck inside, or on the front cross member. Merry Christmas to you and the entire garage as well.
Thanks again for your input Sean, you have an observant eye, yes I completed a report on all defects which I found in my 50 point inspection which I complete on all car's I service, Merry Christmas to you and yours enjoy the holidays keep safe.
A Gary merry christmas to you and your loved ones and a happy new year all the best . I must say how good is that oil filter placed on this car wish they were all that simple to get to
Non-starting, I would check the cam and crank sensors and the operation of the fuel pump, check the pressure in the fuel input line, these are great places to start at,
hello i have a hyundai ix35 4wd 2.0 crdi 184ps a strange sound is heard when it heats up. at 1300 -1500 rpm in idle will hear the sound khkhkh, what could it be? while the cold worked nicely, the car covered 234000km. the sound comes from the direction where the pk belt is and when the pictures are taken the sound is heard khkhkh tenk you
Hello Stevan, thanks for visiting my channel, I once had this problem, it could be the belt that has gone hard, so when it heats up the rubber softens and the noise disappears, try putting some rubber grease on the contact surface, not too much though, if it takes the noise away when cold then replace the belt, failing that, remove the belt completely and run the car for a very short while without the belt, if the noise is gone you must check all the pulleys run by the belt one by one to find the one causing the noise, I hope this helps. Gary
can you also hear when the apricots are drooling? isn't it a chain maybe? when it is cold there is no sound. the sound occurs when the car warms up. how much did you change the chain on that hyundai?
Final thing, you do not need to take the lower plastics off if you are just doing an oil change. The lower cover has a gap in it so you can get to the sump plug, and there is a removable cap directly under the oil filter. Other than that, good video, just remember, details count!
This will help me with my IX thanks
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Gary De La Cruz
Howzit Gary always good to check your videos. Alot can be learnt thanks for the superb videos
Thank you for the support Kyle, it is always great to see one's efforts appreciated.
Looks like that CV seal is starting to leak, from the oil mist on the metal. Often you get a belt routing diagram under the bonnet, either stuck inside, or on the front cross member.
Merry Christmas to you and the entire garage as well.
Thanks again for your input Sean, you have an observant eye, yes I completed a report on all defects which I found in my 50 point inspection which I complete on all car's I service, Merry Christmas to you and yours enjoy the holidays keep safe.
A Gary merry christmas to you and your loved ones and a happy new year all the best . I must say how good is that oil filter placed on this car wish they were all that simple to get to
Thanks for your support and wishes, John, the same to you and yours, yes this ix35 is a pleasure to service all components easily accessible.
Thank you great video awesome information
Thanks for the support, greatly appreciated.
How do I adjust the clutch on my 2014, 2.0lt, IX35 Exc.
There is no adjustment it is hydraulic, which means it is self-adjusting, you may alter the toe board clearance on the pedal itself, but be cautious.
My car couldn’t start due to check engine light not showing on my dashboard and the car remaines in same position
Non-starting, I would check the cam and crank sensors and the operation of the fuel pump, check the pressure in the fuel input line, these are great places to start at,
hello i have a hyundai ix35 4wd 2.0 crdi 184ps a strange sound is heard when it heats up. at 1300 -1500 rpm in idle will hear the sound khkhkh, what could it be? while the cold worked nicely, the car covered 234000km. the sound comes from the direction where the pk belt is and when the pictures are taken the sound is heard khkhkh tenk you
Hello Stevan, thanks for visiting my channel, I once had this problem, it could be the belt that has gone hard, so when it heats up the rubber softens and the noise disappears, try putting some rubber grease on the contact surface, not too much though, if it takes the noise away when cold then replace the belt, failing that, remove the belt completely and run the car for a very short while without the belt, if the noise is gone you must check all the pulleys run by the belt one by one to find the one causing the noise, I hope this helps.
Gary
can you also hear when the apricots are drooling? isn't it a chain maybe? when it is cold there is no sound. the sound occurs when the car warms up. how much did you change the chain on that hyundai?
Hi
Please contact number we have the car
I want direction please
Is that a crack on the Bellhousing
Hi Morne, thanks for supporting my channel with your visit, no it is not a crack but a mould cast mark.
I used shell helix 5w-30 on my ix35 Gasoline
No doubt a good oil for a great car, Dana.
FYI - HX7 is NOT fully synthetic .
Did I see a massive crack in the transmission housing? Must tell the customer about that!!!
Thats a front wheel drive, you could see the front wheels turning during engine running, and the oil capacity specification is 4.1L for the 2L IX35.
Final thing, you do not need to take the lower plastics off if you are just doing an oil change. The lower cover has a gap in it so you can get to the sump plug, and there is a removable cap directly under the oil filter. Other than that, good video, just remember, details count!
It is casting marks you saw James, no stress.
@@vehiclemaintenanceandrepai3790 Ok, kewl