Not sure about the red tubing but the plastics in the computer parts and clear tube can be degraded by the glycol in the antifreeze. Since your spindle temps aren’t engine temps you can use distilled water and put a piece of silver in the reservoir as an anti microbial or add a liquid one so you don’t get growth in your loop.
A rule in the PC watercooling is to never mix different color metals (e.g. aluminum radiator + copper waterblock). Not saying that you did but it's something to be aware of. So what you do is to keep the metal colors same (copper waterblock and copper radiator or aluminum radiator aluminum waterblock). I don't know what the spindle internals are made of so just to be safe match the radiator to it, you will save yourself some headaches down the line due to the galvanic corrosion occuring in the loop.
I'm sure I'm missing something but this setup might work better if there were nothing like a honking big piece of plywood directly behind the radiator. Bit hard to radiate heat with that blocking most air flow through the radiator.
Nice work! I am using a similair radiator, but no fans. Thought I would try out passive cooling at first. It haas been working just fine. But it is not so hot were I live. :)
Great video. If you are still responding to comments would you be able to provide a bit more specifics on the electric hookup? The mechanical hookups were presented well but I was left with questions regarding the electrical. Thanks.
would as 50/50 motor antifreeze work as well? would it need to diluted. The properties of, from my research, or coolant antifreeze for motors is different from the antifreeze of marine/rv pink antifreeze (pure antifreeze).
What spindle? Wanting to aim minimum radiator size that safe so attach to a plate near spindle to keep compact Example be spindle plate tall and bit on back where it is
Not sure about the red tubing but the plastics in the computer parts and clear tube can be degraded by the glycol in the antifreeze. Since your spindle temps aren’t engine temps you can use distilled water and put a piece of silver in the reservoir as an anti microbial or add a liquid one so you don’t get growth in your loop.
Thank you for pointing it out. I will look into that option.
A rule in the PC watercooling is to never mix different color metals (e.g. aluminum radiator + copper waterblock). Not saying that you did but it's something to be aware of. So what you do is to keep the metal colors same (copper waterblock and copper radiator or aluminum radiator aluminum waterblock). I don't know what the spindle internals are made of so just to be safe match the radiator to it, you will save yourself some headaches down the line due to the galvanic corrosion occuring in the loop.
Blue and green should never be seen, unless with some sulphurated copper pipe in between 😉👍
nice, i was original going to do same thing but ended up settled for industrial chiller pump which saved alot of time. subbed love your work!
Chiller is great option. Thx
I'm sure I'm missing something but this setup might work better if there were nothing like a honking big piece of plywood directly behind the radiator. Bit hard to radiate heat with that blocking most air flow through the radiator.
Nice work! I am using a similair radiator, but no fans. Thought I would try out passive cooling at first. It haas been working just fine. But it is not so hot were I live. :)
I don’t think fans needed it I ran it without powering them w no problem.
Great video. If you are still responding to comments would you be able to provide a bit more specifics on the electric hookup? The mechanical hookups were presented well but I was left with questions regarding the electrical. Thanks.
They are all PC component's so all would be 12v, you can see it all wired together into a single terminal block.
Hi.
It’s simply 12 volt system just 2 wires for each component
would as 50/50 motor antifreeze work as well? would it need to diluted. The properties of, from my research, or coolant antifreeze for motors is different from the antifreeze of marine/rv pink antifreeze (pure antifreeze).
What spindle? Wanting to aim minimum radiator size that safe so attach to a plate near spindle to keep compact
Example be spindle plate tall and bit on back where it is
Погрузите трубку слива в жидкость что бы при остановке в систему воздух не попадал!
I have a 3.2kw spindle, is this build sufficient to keep the spindle cool?
Yes. It is
very good video..thanks for your time
Hi, what pump did you use ? I got same spindle just 3kw version.
Any pc pump will do it.
What make is that cooling system, maybe a link?
Where is the power coming from, the VFD or CNC board? Thanks in advance!
From CNC board. Once system is on it on regardless of spindle on or not
@@advanceair thanks
Hi, where did you buy these components from?
Amazon
Do you use controller for pump and fan?
no just 12 volt dc power
where to buy such a radiator and how does it cope
Amazon
@@advanceair you can link to this product please
Damm it suck that you jump cut to the wiring could help alot