Very fine. I do like the rewire for ease of separation of shell and frame. I also favor the separation of lighting functions and the neatness of the connections inherent in the Decoder Buddy. This was a great installation demonstration again! Thanks for sharing!
Hi, can you do a DCC/sound install for a Bachmann Spectrum HO scale 3 truck Shay of the Cass Scenic R.R.? I have one of these models but its a pre-DCC/sound era. Thanks.
Great video, very informative. Have a question on testing the speaker outputs on the board. I didn't follow what information you received by putting the red and black leads on the outputs to determine which pad to use. There are two speaker pads on each side, is there a positive and negative on these? Thanks again for taking the time to film these and post, so helpful!
Great video as always. A little off topic on this video. When you mill out some of your proto 2000 projects what tools do you use. I used a dremel with cutting discs and sanding attachments. Couldn’t get the finish you achieved. Any tips on tools used or attachments would be handy. Thanks
Very fine. I do like the rewire for ease of separation of shell and frame. I also favor the separation of lighting functions and the neatness of the connections inherent in the Decoder Buddy. This was a great installation demonstration again! Thanks for sharing!
Hi, can you do a DCC/sound install for a Bachmann Spectrum HO scale 3 truck Shay of the Cass Scenic R.R.? I have one of these models but its a pre-DCC/sound era. Thanks.
Great video, very informative. Have a question on testing the speaker outputs on the board. I didn't follow what information you received by putting the red and black leads on the outputs to determine which pad to use. There are two speaker pads on each side, is there a positive and negative on these? Thanks again for taking the time to film these and post, so helpful!
Great video as always. A little off topic on this video. When you mill out some of your proto 2000 projects what tools do you use. I used a dremel with cutting discs and sanding attachments. Couldn’t get the finish you achieved. Any tips on tools used or attachments would be handy. Thanks
www.proxxon.com/us/micromot/37110.php This is what I use to mill frames. It works very well.
@@SoloContracting excellent, thanks for that
Where do you get your led's from?
www.ebay.com/itm/122017200261?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YHqaILLgTz2&sssrc=4429486&ssuid=QL317IOiTqe&var=421021698628&widget_ver=artemis&media=COPY
Your link didn't work, are they just size 0402?
Yes. Warm white 0402 leds.