Titanium Stem for Brompton from Ti Parts Workshop - How to install - CHPT3 - DIY
Вставка
- Опубліковано 5 вер 2024
- TiParts Titanium Brompton Stem S Type
Titanium is as strong as some steels but has less weight. The two most useful properties of the metal are corrosion resistance and strength-to-density ratio, the highest of any metallic element.
It is not a straightforward install like the original steel Brompton stem, tried different ways of installing it but you are lucky as you don't need to scratch your head, we will show you guys how we manage to install this bad boy Titanium stem from Ti Parts Workshop!
#brompton #TiParts #16inch #bromptonphilippines #HH #tiparts #ti #Tiparts #tipartsworkshop #t #Bromptonstem #chpt3 #CHPT3v1 #chpt3mods #bromptonchpt3
Song: VensAdams - Summer Dream
Music provided by Tunetank.
Free Download: tunetank.com/t...
Issue with these is the angle of the wedge. If you notice the wedge angle is straight following the handlebar to prevent the forces when riding/braking etc. Most if not all titanium stems I see wedge angle follows the hinge. My titanium stem has the same issue as well. Fits and tightens fine but could be better👍🏻
This issue is also mentioned by Brompton Family Time channel's Ti Parts video for the same problem, though after sending the problematic stem to Ti Parts, they were able to take care of it. But Brompton Family Time had to pay the shipping and wait a long time for the shipment to arrive at Ti Parts facility. Ti Parts was able to send the replacement part that worked well but would've been better if they got it right the first time.
looks good, I have a chpt 3 v1 as well and I changed only the seat post with a ti parts. my other Brompton bikes I replaced a lot of parts and I'm thinking to buy a silver titanium stem soon !!
Brompton stem are almost a kilo! As long as you have a trusted brand to replace with and im sure you will not regret it, the original one is rusted on this CHPT3.
Dream bike! 😍😍😍
You still have a chance, Chpt3 ver 4 is coming.
Looks great! Can I ask where can I get the torque wrench you used in the clip?
You can find it in any online bike shop, I think this came from Chain Reactions, thanks man!
Would this Stem fit a 2021 C Line bike?
Yes Edlyn it will, 100%
Does it flex compare to steel one?
honestly, we couldn't tell apart from the noticeable weight lost in the front end, its from Ti Parts so the build quality is just amazing.
Great but how on earth do you buy one
We can always help you out if interested DM us on Facebook
I've been trying to track one down in the UK, no luck
give us a shout if still needed
@@781BromptonPremiumParts can you publish your email please
@@781BromptonPremiumParts can you publish your email address or link to your web shop, thanks
Thanks. Shipping to germany?
Yes we do
Hi.. did u tighten to 15-16nm?
I tighten it to 30NM as it changes to wedge style stem lock.
@@781BromptonPremiumParts oooo coz in ur video it show 15-16nm
@@aarhmn for titanium fork we suggest 16NM, sorry I think you are right
As far as I can see,you use caliper brakes,which deserve short pull handles.
But to me it seems you use long pull handles suitable for cantilever brakes,which ask for high pulling power on caliper brakes.Am I wright or is it an illusion?
Hi there, it could be an illusion as the levers are for short pull and made for side pull or caliper brakes by Ridea I think you are referring to Paul levers which are made for cantilevers brakes, we like your technical knowledge as it is correct, we also tried V brakes levers to caliper brakes and the result is not very good then we tried this Ridea and there is no turning back, it is a perfect for our Brompton setup.
@@781BromptonPremiumParts At least I know that the original brakes on my Lightweight functions excellently! Going down a steep serpentine hill I had to fully brake at intervals, to be able to pass the "cattle bars" over the road, from very high speeds. Finn. Denmark
@@finncarlbomholtsrensen1188 way to go Finn, safety first!
where is it made?UK?
Hey there, it is made by Ti Parts Workshop which is base in Hong Kong
Nice try👍, but can be better.
Looks horrible! That glossy black doesn’t match with the satin black from the fork 😢
Thanks Yoru for your opinion, hope Ti Parts can make a matte finish for guys who prefer it that way, but we kinda like it.