Це відео не доступне.
Перепрошуємо.
Tikka T3X Tac A1 Disassembly
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 19 сер 2024
- Disassembly of the Tac A1.
КОМЕНТАРІ • 101
Наступне
Автоматичне відтворення
Tech Tip: Tikka T3x Bolt Maintenance 101Corlane Sporting Goods Ltd.
Переглядів 336 тис.
Tikka T3x CTR Range 2hickok45
Переглядів 137 тис.
Tikka T3x Tactical A1 308 win Обзор и отстрел на кучность.SNAPMAN
Переглядів 64 тис.
Зачем страны меняют флаги? #россия #ссср #новаязеландияПослезавтра
Переглядів 5 млн
Зачем ВСУ перешли границу? Обмен заключенными - шаг к миру? Риск войны на Ближнем Востоке / ШевченкоRTVI Новости
Переглядів 2,7 млн
Громадянська оборона 2024: КУРСЬК І БЄЛГОРОД палають, у РФ ПАНІКА - повний випуск українськоюВікна-новини
Переглядів 248 тис.
ВЛАД ШЕВЧЕНКО і АЛЛА МАЛКІН в СРАЧІ #26ЛЕВИ НА ДЖИПІ
Переглядів 281 тис.
Tikka T3x Tac A1 FULL REVIEWAmorphous Gear
Переглядів 324 тис.
TIKKA T3X TAC A1 at almost a MileMarkandSam AfterWork
Переглядів 117 тис.
Tikka T3X Tac A1SageDynamics
Переглядів 56 тис.
Quick Look: Tikka T3x Tac A1Impact Dynamics
Переглядів 74 тис.
Tikka "T3x Tac A1" 6.5 Creedmoor Rifle (with 1000 Yard Test)Ozzie Reviews
Переглядів 411 тис.
Tikka T3x Tact A1 | 1000 Yard ReviewAlabama Arsenal
Переглядів 230 тис.
Sniper's Hide Tikka Tac A1 Update ReviewSHLowlight
Переглядів 204 тис.
Tikka T3x tac a1 - 3 shot zero and first shotsThin Line Defense Co
Переглядів 23 тис.
How To Clean Your Rifle... The Right Way!Paramount Tactical
Переглядів 110 тис.
Максим Бородін & Zlata Ognevich - Без тебе | Прем'єра 2024Максим Бородін
Переглядів 457 тис.
😭ЛЮДИ ВОВКАМИ СТАЮТЬ....5 канал
Переглядів 3,1 млн
Арестович: Операция ВСУ в Курской области. @A.ShelestAlexey Arestovych
Переглядів 3 млн
Курск и Суджа России НЕ НУЖНЫ? ПОЗОР Ахмата | Антизомби 2024 - 30 полный выпускТелеканал ICTV
Переглядів 765 тис.
РЕЙНДЖЕРС - ДИНАМО. Детальний огляд матчу. ЛІГА ЧЕМПІОНІВFootball Hub
Переглядів 317 тис.
Киселев. Генералы и Лукашенко предали Путина, за Россию воевать некому, Путину конецДмитрий Гордон
Переглядів 1,3 млн
ЛЕТНИЙ ДЕНЬ ТВОЕГО ДЕТСТВАSIDELNIKOVVV
Переглядів 1,7 млн
ПОМОГЛА НАЗЫВАЕТСЯ😂Chapitosiki
Переглядів 27 млн
Trigger can be adjusted without taking down the rifle. The adjusting screw is accessible through the magazine well.
stefanoc222 Yes! I just learned this! Haha thank you!
I was about to say for about $1600 (on cheaperthandirt.com) it better have an externally adjustable trigger
Thank you for this detailed demonstration. My new Tikka T3X Tac A1 is arriving tomorrow at mt FFL's. Excited!!!
AG Thank you very much for doing the first disassembly video on the Tikka Tac A1👌🏽appreciate your time to respond with a request video follow-up for disassembly.
tawaitai not a problem!!!
Thanks for the video. I will buy one in 6.5 CM caliber as soon as they are on sale for under $1,400.
Just paid 1500 for mine new, worth every penny.
They'll be hard to find at that price considering the import fees to ship them to the States.
@@kenhunt price is way too cheap in the US, in my shithole called France they go for 2500 euros to 2760 euros depending on the color you want. I can’t understand why it’s more expensive here since the product is made in Finland which is in Europe.
@@Liberty-or-Death-1776 here domestically 2290 and next series 200€ more.....
@@moitoi4064 anything related to guns, cars or booze is shit in here, doesn't matter if we are in EU.
That is my next purchase very soon. Thanks for sharing
Just got this chassis.Going on a CTR I've ordered. Thanks for the video.
you can buy the tac a1 chassis? are you putting the CTR receiver and barrel on it?
@@anthonyt4981 hi Anthony did you successfully put the CTR into the tacA1 chassis, anything l should be aware of as l intend doing exactly the same thing. Thanks.
@@johnbrown2559 I own a complete tikka t3x tac a1 rifle.
HI you dont need to take the action apart to adjust the trigger pull it can be reached with a ordinary allen key only if you want to change the spring in the trigger unit do you need to take it apart as the head of the spring adjuster hits the take down bolt when its loosened to it max [[ lowest poundage ]] , its designed that way to avoid the screw coming out unintentionally
One minor issue I had that other owners may want to take note of.
The pivot pin for the mag release wasnt fit very tight on my rifle. It fell out during a deer hunt, and by the grace of god I noticed before I lost the little pin, spring, or mag release. It was still loose after reinstall, but a dab of superglue on both sides has mine staying put.
That's an interesting note. I'm now 2000 rounds and 8-9 deer hunts in with no issues. I'm gonna check it! lol
Thank you, great vid. Any chance you can show us how to remove buttstock?
I do not plan on removing mine, but from what I can tell an AR15 wrench will remove the castle nut and allow easy removal of the stock.
And thanks for the help
What are these two small rings on the other side of the bolt for? You can see them on 3rd minute of the video on the left hand side screen. Two small rings set sideway to the rifle.
The two small rings are a very sturdy Sling Mount that will accept traditional sling mount coupling as well as quick release sling coupling. When I opened the newly arrived Tikka T3X Tactical A1, this Sling Mount is already attached to the rifle exactly as you see. The accessories boxed with the rifle includes another identical Sling Mount and hardware for attaching it to your favorite location on the gun. I hope this clarifies the structure on the Tikka.
is the recoil lug integrated into the aluminum chassis or is it the same style as the standard T3X?
What are the torque specs for all screws when you put it back?
You can adjust the trigger without removing the action.
Tony Viera Yeah I figured this out. It’s a real pain in the ass though.
Thought you could adjust the trigger by just removing the mag?
I would rather start with taking out the bolt…
5 years later? How is it hanging in there?
Scope recommendations for todays relevant market? Due to have to go as expensive as licea or NF or…? Thoughts if you have time or new video updates if anything beat tikka or your scope set up
I really want to do a part 2. I still have this gun, and it’s still in a very similar configuration, and no not really. I’ve been out of the gun industry for a few years now but still stay connected. I can’t think of a better value. As far as your scope question goes, there are some really good budget options out now that weren’t back then. I’ve been really impressed with Arken in my limited use…so we’ll have to see! Thanks for watching.
Anyone know if the barrel can be changed by the average shooter? An RPR's barrel can be changed by the owner with a set of headspace guages and basic tools. Barrels are consumable items and will eventually need changing if you want to maintain accuracy.
boutique53 Don’t quote me on this but I think the short answer is no. There’s little information I can find about swapping Tikka barrels. Just keep reading, “Use a quality gun Smith”.
Hey how can I adjust the muzzle brake on this ? I recently bought this rifle when I installed the included muzzle brake the cuts on the brake doesn’t set to left/right position instead it’s pointed up/down.
Screw it on until it lines up the tighten the Allen screw to hold it in place.
Нам бы ваши законы и я бы парочку прикупил!
В чем проблемы?
@@user-nz1gs6kg8g Разрешение на нарезное отсутствует!
@@user-ms3up9wn7g Я тоже жду,может в этом году в думе рассмотрят поправки КК и изменят стал с пяти лет до трёх,было бы не плохо.
@@user-nz1gs6kg8g Было бы здорово,но я пока ищу обходы законодательства и тд))
Does anyone know if the tikka tac a1 action 6.5 creedmoor will fit directly into a grs bifrost stock? ( I understand the foot print is the same for tikka tx3)..Wanting to cut the weight down to do abit off hunting..
I don’t see why it wouldn’t. I would get the one for the CTR. I assume it has something to do with the detachable magazine.
How would you compare to the ruger precision? I've heard great things about both
Foster Patton Watch the full review of this rifle, I compare them directly.
Lies I just rewatched the whole video
Not this video.
Do better
I own both. Tikka hands down.
Hey man I have a regular tikka T3 .300WM would that fit directly into this chassis?
Unfortunately not. The 300WM is a long action. You may see if Cadex or MDT makes a chassis.
How much does the factory handguard weigh on the Tikka? On the RPR? Thinking of swapping out the hanguard...
dannydubya1 no idea? I know lighter handguard won’t be as tough. Are you finding the gun too heavy for you needs?
Great vids.
Which Atlas bipod do you recommend? QD or no?
Christopher K Hamwright your preference! QD is just fine!!!
What's required to take the barrel nut housing on/off? I have an extra barreled action lying around. Looking at buying one of these chassis on the used marked, but didn't know if it would require taking the barrel off the action to get the nut on. Thanks.
C I do not know. I would assume a barrel vice and a big ass wrench. Sorry. If you want to get rid of that action let me
Know. I don’t think you need to take it off, but I’m not sure...
@@amorphousgear2085 Did a bit more research. I think I was referring to the forend adapter. Barrel is still shouldered and this isn't a barrel nut system. Apparently it has a small screw that goes into the scope rail, but beyond that the barrel just slips off.
I’m following you now lol
Any idea what is involved to uninstall the factory? Got a PVA prefit barrel nut barrel, but got told the Tikka factory action/barrel requires some special tool to uninstall, not sure if this is the case.
Xiao Han I wish I knew more. Can’t find any good sources in Tikka barrel changes.
👏
No bolt disassembly??
Why? Lol
Have you experienced or heard of any top tier barrel companies having replacement barrels that we can just swap? Or would it be wise to take to a gunsmith?
Johnathan Kim I cant find much information on this but it doesn’t appear to be user replaceable. I believe it requires some special tooling. I know Frank from Snipers Hide had a Bartlein barrel put on his.
Sniper hide
When you put back the action to the chassis how much torque do you apply to the screws?
I think I did 65 inch pounds. That’s usually the standard. Not sure what Tikka will tell you though.
TheT3x TAC A1 Torque settings are 7Nm [62 in-lbs].
@@x31moose thank you.
Have you ever removed or taken the butt stock off, would be good to see the disassembly of that as well as its supposed to be very difficult to do for some reason.
Anthony Bostock Never needed to, but it just looks like an AR castle nut. Do you have issues with your stock?
@@amorphousgear2085 I am wanting to change the Butt stock for another one or somthing better. I can undo the castle nut but there must be something else that needs to be loosened that i cant see that's still got it fastened tight.
Will a ctr action drop into a tac a1 chassis?
Yes, I have done just that swap between my CTR and TAC A1. However, the factory CTR action screws are too short for the TAC A1 chassis. You will need longer screws (or the TAC A1 chassis screws).
Ствол из нержавеющей стали?
How do you like this rifle??
Have you noticed any wiggle in the stock?
mike evans I have not. If you had any I would say check the castle but.
Nut***
I haven't messed with it to much but the nut appears to be tight. it wiggles where the stock attaches to the mini-buffer tube. I assume there is a nut or bolt inside thee that attaches the stock to the tube. but I could be wrong. Great video. Thanks for the help.
I might take a look at it tomorrow.
AG did you have a chance to look at your stock? I took my rifle out yesterday, it was awesome (even with me behind it). I still have the stock wiggle but it shot great.
Do you know how it connects to mini ar type tube?
mike evans You should be able to remove that castle but and screw in any mil spec AR buffer tube. Do you not like the stock? I’ve found mine to work excellent.
@@amorphousgear2085 I like it. Just trying to get an ideal of why it's loose before I tear into it.
Really strange that it’s loose. Let me know if i can help man! Thanks!
AG, thought that I would give you an update. I couldn't get the mini buffer tube to break free from the receiver after loosening the castle nut. I decided to take it to my local Beretta warranty gunsmith before I screwed it up. They also couldn't get it to come apart and sent it back to Beretta. Six weeks later I got it back and it looks like they replaced the stock. Can't wait to mount optic and get it back to range. Thanks again for the help.
Well that’s good news! Glad they got you taken care of. All of your pain will be worth it. Haha thanks for the update!
you need to re torque all them action bolts now , not just tighten them
I agree.
What torque?
Does anybody know if the handguard can be change with any standard AR-15 handguard?
That's an excellent question. I doubt that the receiver has the same thread pitch as an AR15 barrel nut. That being said, why would you want to change it? It's basically perfect. lol
Just trying to find away to reduce the weight of the rifle