RS 800 General transmissions on a Ariens 
Вставка
- Опубліковано 25 чер 2024
- They’re installing these plastic transmissions into these mowers not understanding why it’s causing Constant issues consumers beware on Riding Mower with these General transmission RS 800
#generaltransmission
#mowers #mowerrepair #plastictransmission

Just bought identical mower, with 20hp engine, same exact issue, sold to me on marketplace for the same exact 200 bucks. Look forward to the plastic futures of smaller ride mowers !!! Good vid!!
You installed the new bottom part backward, the adjustment screws was supposed to face out for adjustment. 🤔🤔🤔I didn't see the screws after you install it....
Of all the repair videos that relate to the RS 800 Transmission Repair this is the best one. I have a ARIENS 21 HP and now will be able to repair it; if the parts that are broken are external. As mentioned if internal out-of-luck!
I’m glad I can help bud but basically yes any external parts could be replace anything internal you’re really out of luck I’m just really surprised they put these plastic transmission on
Thanks for the video. Mine failed in the same spot but in a different way. The locked bearing caused the whole bottom black cap that holds the bearing fused with the bracket that shifts it to close.
Great explanation!
No problem bud
Just remember to put superglue on your screws before reinstalling them. That is per the manufacturer. Great Video.
Nice job Mando! Thats not the quality you would expect from Ariens. I was just thinking about you and have thought your probably really busy. Hard to make videos when your busy as hell! Hope everything is good with you and your family bro! ✌👍🎥🇺🇸 Roger
Profit....that's the reason they do it. The C-suite executive teams of these companies are bonusing themselves lots of cash for the money they save by going plastic. Oh...by the way...that would be YOUR cash.
Yo I'm having a hard time finding that belt
They are junk, if you don't keep them clean.and they are a pain to clean. you have to remove the tran. and remove components down to the cover and clean.
Yep. My exact part on my Poulan pro broke by 1 1/2 yrs. Still under warranty. They put a better made one in and been working 5 more years no problem. Plastic is good and all but not everything should be plastic or whatever : ) although they charged $900 to Poulan or whoever. It was a rare part at the time very expensive.
I just came across one of these. It failed at 450 hours. The driven pulley on mine was broken. And upon inspecting the drive pulley I saw it was ready to fail also. That lower bearing was bad. Also needed the seals.
The parts are about $250 now for both pulleys so I scrapped the tractor. After i removed the engine.
I've got an Ariens mower with the rs800 transmission about 600 \700 hrs on it use it for a tractor in the off season. Pulling logs and brush and a rake only problem i had was a few axle seals its one tough transmission in my book my neighbor has the same tractor has lots of hrs with no problems
Mine broke inside. $700 to fix!! This was for my back up residential mower, with hardly any use. Plastic was/is a bad idea.
Repairing the third one of these transmissions. These are not difficult to work on. It is a plastic composite, weight saving. The problem is owners of mowers not keeping mower cleaned off in all 3 I have repaired. Mulching blades tend to cause more build up of debris under mower vs high lift discharge blades. These transmissions are fast too. The shifter cam if debris gets under the cover, it will not shift into fwd or reverse smoothly, then operator keeps stomping on pedal and that breaks the shift cam.
I see this all the time! If they are kept clean they work pretty well but not being greaseable is an issue!
@@IndRepair they use this transmission in mower models overseas in Europe, General Transmission from what I read is a French Company. The design is good and works well if kept clean, a very fast transmission. The videos posted on youtube all say its unserviceable transmission, but the external shift parts and wheel seals are serviceable. It does require a special tool to remove the forward pulley though. The original owner of this mower with this transmission, if they register the mower online, the CVT belt was advertised as a lifetime warranty item. Not sure about the labor for a shop to change it is covered. The claims this company has had with these transmissions though they may have changed the belt warranty. I'm sure a lot of shops have refused to work on these because of time and not fully understanding how the transmission operates. The transmission uses a particular grease also and the gears inside are a strong composite material and the grease that comes out is usually negligeable. Tech help gentleman I spoke with say the transmission will operate without grease, but it is added in production to make gears less noisy. Even with grease, this transmission still makes a gear noise.
@@IndRepair ua-cam.com/video/_VPSLaM-y4k/v-deo.htmlsi=ImHxJmJxQ89y7n5V
@@Thomas-ul3uy I agree, I have a review on the transmission and it really is not a bad design except that with the vibration the seals come out keep a good eye on them and blow off the transmission every couple mows (or every, especially if mowing sticks and stuff). I see 4-5 every year fail but usually just the upper kit like the because of the debris stuck in it and stomped on by the customer since the pedal gets stuck
You could’ve gotten to all of that through the battery box. It’s tight but doable
Trans normally isnt the issue. Its normally in the variable drive setup.
Why he didn’t clean !!!!😮
RS means real shitty 😂
Ha ha ha ha ha you got that right
I agree
Where can I get drive clutch for a rs800 rearend
How do you take the front one off
Those screws should have lock tite on them, the removable version of lock tite
How do you take that off
How do you take that
I have a Husqvarna YTA22V46 uses the a variant of this RS800 transmission. That plastic piece you needed to replace has completely melted/worn down and the two screws on the left side holding the whole piece in place…snapped off. Any idea if the sell just that part of the casing or you think the whole transmission needs to be replaced?
Sorry bud replace it
I only will buy a used one for the engine, which is 100 bucks with good tires
There totally junk period
Pull engine, deck and wheels
Rest In mostly scrap
Besides being poor quality why wouldn’t you use a sealed shielded bearing instead of an open one that with moisture will fail in no time John Deere uses the same transmission
There is your dinner
Did you have too take off the tires
I would less weight so the trans can just hang there
Wow junk have one 180 hrs no reverse what the hell plastic!!!!!!!!!
There just junk period
Don’t waste your money
Buy aluminum ones
Find a older model mower with old style trans burns speed
Order new motor and seat
Done for 10 years