Hello! I am going to build 5s3p li-ion powerbank and I need reliable USB C with 100+ W output but at least 2 outputs. Can I plug 2 of these boards in parallel to 1 battery pack? Will 2 boards work properly together? I mean maybe capacity calculations or something else?
Isn't it's advisable to use a BMS as well along with this. This one will give common voltage to all cells. Also, does it output the voltage as negotiating with power consuming device and can be used for both smartphone and laptop?
I have a question about this module About the battery capacity is it (lithium ion) 4.2 full -5000mAH 4.2-10000mAH 4.2-15000mAH 4.2-20000mAH 4.2-25000mAH OR 4.2×4=16.8 volt (4s battery pack) 16.8-10000mAH 16.8-15000mAH 16.8-20000mAH 16.8-25000mAH I am talking about default configuration If you kindly answer this question it will be great helpful for me and others
sir i brought 120w module from you, i connected 16 v li ion battery pack ,but when i connected the module to my iqoo 11 phone that comes with 120w fast charging charging, after connecting module it will not charge my phone with 120w output,please sir guide me ..thank you.
The clean and clear answer is smartphone brands use their proprietary charging protocols like oppo,realme and OnePlus uses supervooc charging, Vivo and iqoo use flashcharge etc. these protocols are only to be used by their branded chargers and devices. This module uses pd and qualcomm charging protocol. While this can able to charge any usb c powered laptop or macbook or any apple device. Still it lack some protocols mentioned before.
Next time please use an simple cheap inline usb monitor and show a few examples on which configs you tested and what the monitor shows.
What are those L1/L2 pads for?
Can i use a lifepo4 12.8v 105ah battery pack for this module?
Hello! I am going to build 5s3p li-ion powerbank and I need reliable USB C with 100+ W output but at least 2 outputs. Can I plug 2 of these boards in parallel to 1 battery pack? Will 2 boards work properly together? I mean maybe capacity calculations or something else?
Isn't it's advisable to use a BMS as well along with this. This one will give common voltage to all cells.
Also, does it output the voltage as negotiating with power consuming device and can be used for both smartphone and laptop?
Do you need charger that has PPS?
It can support 3s 12.6v battery pack?
I have a question about this module
About the battery capacity is it (lithium ion)
4.2 full -5000mAH
4.2-10000mAH
4.2-15000mAH
4.2-20000mAH
4.2-25000mAH
OR
4.2×4=16.8 volt (4s battery pack)
16.8-10000mAH
16.8-15000mAH
16.8-20000mAH
16.8-25000mAH
I am talking about default configuration
If you kindly answer this question it will be great helpful for me and others
This is is a single cell voltage. Thus 4S will be 16.8V
You are right
COD available ha Keya @@punoscho2022
I want make a 4s 50000 mah power bank with this module is possible
sir i brought 120w module from you, i connected 16 v li ion battery pack ,but when i connected the module to my iqoo 11 phone that comes with 120w fast charging charging, after connecting module it will not charge my phone with 120w output,please sir guide me ..thank you.
The wattage is asked by the phone's processor. it depends on many thing like phone / battery charge, temperature, usage a that time etc.
The clean and clear answer is smartphone brands use their proprietary charging protocols like oppo,realme and OnePlus uses supervooc charging, Vivo and iqoo use flashcharge etc. these protocols are only to be used by their branded chargers and devices. This module uses pd and qualcomm charging protocol. While this can able to charge any usb c powered laptop or macbook or any apple device. Still it lack some protocols mentioned before.
can this device negotiate 20.5V and 5S configurations?
We have not tested it in that configuration.
👍