Full Wave Rectifiers
Вставка
- Опубліковано 6 лют 2025
- This electronics video provides a basic introduction into full wave rectifiers which converts a sine wave AC signal into a pulsating DC signal using two diodes, a load resistor, and a center tap transformer.
What Is a Diode? • What Is a Diode?
How To Solve Diode Circuit Problems:
• How To Solve Diode Cir...
Diode Logic Gates - OR, NOR, AND, & NAND:
• Diode Logic Gates - OR...
Clipper Circuits:
• Clipper Circuits
Clamper Circuits:
• Clamper Circuits
Half-Wave Rectifiers:
• Half Wave Rectifiers
__________________________________
Full-Wave Bridge Rectifiers:
• Full Wave Bridge Recti...
220V AC to 12V DC Converter:
• 220V AC to 12V DC Conv...
Capacitor Voltage Booster Circuit:
• Capacitor Voltage Boos...
Half Wave Voltage Doubler Circuit:
• Voltage Multipliers - ...
Full Wave Voltage Doubler Circuit:
• Full Wave Voltage Doub...
__________________________________
Voltage Multiplier Circuit:
• Voltage Multiplier Cir...
Light Emitting Diodes:
• LEDs - Light Emitting ...
Power Dissipation In LEDs & Diodes:
• Power Dissipation In R...
Final Exams and Video Playlists:
www.video-tuto...
Full-Length Videos and Worksheets:
/ collections
____________________________________
Hantek Handheld Oscilloscope: amzn.to/3B5iu9d
Center Tapped Transformer: amzn.to/2UH0voK
Resistors: amzn.to/2U2dPEp
1N4007 Diodes: amzn.to/2U9dtvz
Alligator Wires: amzn.to/3B1Lwqa
Digital Multimeter: amzn.to/2VD6awt
Disclaimer: Some of the links associated with this video may generate affiliate commissions on my behalf. As an amazon associate, I earn from qualifying purchases that you may make through such affiliate links.
Final Exams and Video Playlists: www.video-tutor.net/
best of the best . U ARE LITERALLY SAVING MY LIFE FOR 2 YEARS.
how r u now?
Your videos are getting me through my degree. Thank you so much for making this content. I am beyond grateful.
Robotik?
Ain't nobody telling me that you are not single-handedly the greatest youtuber on earth
Your awesome! Good graphics and explain it slow enough to understand what’s happening with good calculations. You remind viewers that conventional flow is being used and what Electron flow is. Thank you
These videos are single handedly getting me through solid state class. Thank you
How'd the class turn out?
You're the best teacher ever sir. Really.
You are the best teacher ever
Good short explanation. Thank you.
Mfethu, you are a beast! Thank you so much, you are a God sent to all tertiary students!
I love your lecturers sir we thank God for you .🙂🙂🥰
Dude. I don't know how to thank you but thank you.
Have you ever thought about doing programming lessons? C++, VHDL, etc. Well get to it, I need you to save me :(
A professional MMA fighter asking for programming courses is the most random thing ever. Keep going bro you got this
and this happened 4 years ago, you guys are old now, so am I haha
Am I the only one who finds it funny when I hear those calculator sounds when he's inputting those values every time? I find it cute LOL XD Anwyays I love this guy helped me a lot!
You are literally my super hero
just realized the full and half wave formulas are listed below this one is solid
excellant teaching method ,clear understanding of each and every step like it. thanks
no way my man just explained how to do 120/5
You are my live saviour!
Thank you . Finally i can understand that
The Lebron of electronics straight up
Good explanation sir thank you
great video thank you 🙏
you explain int the best possible way
In the question 120 Vac is Rms value, so when we multiply it with root 2 we get peek value not the Vdc value. In order to find Vdc=Vavarage we have to divide Vpeak value to pi, which is equal do Vdc value.
No, RMS is the average already. By definition: square root of the average value, squared.
1v RMS AC into a fixed resistance will heat the resistance precisely the same amount as 1v DC will (I believe this has been used in high end bench multimeters to measure AC waveform of any shape). Average of 120v fixed DC = 120v, so the average of AC 120v RMS must equal 120v too.
Edit: I may have misunderstood you…
you have to divide the peak voltage by 2, as it is center tap.
Great tutorial
Thanks
Always the best 💃💃
Amazing information and insights; thank you so much for making and sharing these (non-ochem) videos!
On the center tap transformer , if I am not mistaken in a full wave rectifier the waveform is 180 degrees out of phase , which means the D1 and D2 turn on , on both positive swings of the sinewave resulting in 2 positive halves on the output.
So great. Easy to understand. Thank you
I am so thankful to you sir
Thus vid really helped me with a course I'm on. Thanks 🙂
a very helpful video! thanks...
Thank you Sir.
THANKYOUUUUUUU😭
Because the waveforms are 180 degrees out of phase we can have a hot and neutral line or return which is 180 degrees out of phase. That means the relationship between a V.O.M which measures peak to peak value is measuring in digital form or analog form from HOT line to NEUTRAL or Black line to white line we can so measure 120 VAC in phase, proved on an oscilloscope we will measure peak to peak value in phase as 60 +VP to 60 -VP right in phase. That relationship of the sinewave is on one line and to the return in a circuit. That shows the phase loop.
Nice video dude
.. Very helpful..💙💙
MY TEACHER IS SO BAD, THANK YOU
Better than best!!!
I have a center tap transformer it was for microtek ups 1400. I want to use it for for battery charging and I don't want to disturb its design. The challenge is that the center is positive I wonder how the diagram of electifire should be away from the this one you have just explained.
So, what is the role of resistor value here?
excellent video
subbed, good video
Brilliant!
First I'd like to give a great appreciation thanks alot. And I wana you to make tutorial on Small Ac signal MOSFET JFET pls if u can
well explained
To my understanding also in electricity there has to be a load to draw current to it.
Thank you very much
Love the video, it helps a lot. But 1 quick clarification: You said the peak voltage is 12*sqrt(2) = 16.97, but when calculating average voltage you use 16.27 (16.7 - 0.7) as the peak voltage. What is the new value (16.27)?
up
That's the output voltage. Vo,pk = Vs,pk - Vdiode = 16.97 - 0.7 = 16.27
peak voltage the resistor will deal with.
ya, quite confusing when calculating Vaverage you use (16.27).. y dont you use (16.97) instead? anyone explain please
@@nurhafizahaziz6785 We use the 16.97 V if we are solving wuth the "Ideal diode model" which ignores the parrier potential of the diode (0.7 V in silicon diodes).
But the correct way, or most common way is to replace the diode with a 0.7 V battery then adding or subtracting it from the original Vp.
Thank you..you have saved my ass
Thank yu sir
What is the point of having a center tap transformer? I understand that the bridge rectifier allows for the full secondary voltage at the output vs this type of full-wave rectifier which reduces it to half, but I still cant figure out the purpose of dropping half the voltage before it reaches the output. Thanks for the videos.
I think that in a way, you don't necessarily "drop" more of the voltage with a (non-bridge) full-wave rectifier compared to a half-wave rectifier. In a half-wave rectifier, you can think of it as going from V = 0 to V = Vpeak, while in a directly center-tapped full-wave rectifier, you'd go from V = -Vpeak/2 to V = +Vpeak/2. The range is still the same (Vpeak, or the max voltage across the entire secondary coil), but instead of larger half-waves, you get smaller half-waves twice as frequently.
@@PunmasterSTP makes much more sense thanks!!
@@chrisreale4326 I’m glad my explanation could help! A lot of times I try to reply to things to lock in my understanding. I also find it interesting to reply to very old comments, to see how people have been doing and to start up some conversations.
@@PunmasterSTP sadly I forgot most of the stuff I learned in that solid state electronics class already, as well as electrical theory in general :(
But I will say when you graduate don’t hesitate to apply for anything and everything that seems even mildly interesting! I got into an unrelated field thanks to my science based studies and I’m damn happy for the new opportunity thanks to my willingness to go back to school :)
@@chrisreale4326 I’m really glad to hear that, and I hope your career is taking off!
How is Vp 120VAC? that the RMS value correct? should 120 be multiplied by 1.414 for Vpin?
Hi Good Sir what if the other diode is forward biased and the other is reversed? then the two diode will be turned on in positive and on the negative will be both turn off. how can it be solve that way? or is it even possible to solve?
Thank you sir
Very good
What about when both diodes are flipped to reverse Bias, I have a practice problem like that and Im so confused how it isn't an Open Circuit
when do we use full wave rectifier and half wave rectifier?
I think if you need to make DC current (such as for electronic circuits) but you start off with an AC current source (like the electricity from wall outlets).
I need help because I have this circuit problem but I have a Vs DC at point B. How would that affect the values and readings?
i really want to meet you in the real life
Thanks 😊
So why doesn't a center tap short circuit the inductor?
i have never loved, or will ever love, anyone as much as i love you and i dont even know what you look like
Life saver
thank you
that's cool but help us to see step by step how to measure it
THANKS
what must be the value of the resistor?
You need to know the is current this video for exp the full wave rectifier
Vr = 16.27 v
The transformation prob
Its given is or ip current
good videos friends
Great
Nice
Think you
I'd like to see this proved in a lab. I am getting close to 15.5 vdc on the output. What value resistor are you using? Thanks.
What type of setup were you using? Were you working with a physical circuit, or with a simulation tool like Multisim?
@@PunmasterSTP Yes, a physical circuit.
@@ThomasACarlos Hmmm…if you have access to a simulation tool, it might be worthwhile to double-check using that. What components were you using? (i.e. load resistor, diodes, transformer, AC source, etc.)
@@PunmasterSTP Unfortunately, 1 year later, I do not have my notes. Sorry.
@@ThomasACarlos Oh it's quite alright, I was just curious. I like to reply to old comments just to see how people have been doing, and start some interesting conversations. How has school been going/how did it go?
Your diodes are backwards. Your diagram shows the center tap as being always negative.
Good
Sen nasıl birisin helal olsun sana.Sen nereden geldin helal olsun sana.Allah seni cennetlik etsin.
Tomorrow I have physics exam
thats good men
Thank you so much :'(
His voice.... Damn..
Your invited to my graduation!😂
*You’re
Wow 😲❤️
👍
i really want to meet you in the real life
✅☑️✅☑️✅☑️
I stopped watching 7 mins in, the explanation of the full wave rectifier with a center tapped transformer was way wrong
You also need 4 diodes to make any kind of dc rectifier
and that's not even getting to the missing capacitors and resistors to make this work
Life 2 year
electronics are not much difficult........
thank you sir
Thank you very much
thanks 👍
Thank you so much