Great tool. If I could suggest one thing. Shorten the jack arm to bring the jacking pad inside the wheel base. When you jacked the car up the jack was front heavy and could lead to the jack tipping forward. If you bring the jack pad between the wheels it will be more stable.
I'm not an engineer, but i think, if you can tilt the whole system, with the handle a bit higher like about 8 inches off the ground, it can be good for cars etc and you can keep rotating it without having to shift levers from side to side
Podrías fabricar una unión tipo articulación de la dirección de la columna de auto,así tendrías menos cerca del suelo la manivela para subirla. Y la base donde se apoya el auto que sea fija para evitar se incline estando arriba el auto
Adapted idea from conventional scissor jack, but well made. Just some input. If you not going to give dimensions then take out all the "cutting " of material, channel,round bar, flat bar,etc....we know how to cut, just adds time on the video. And more importantly, you could hsve added safety rod into the frame as to lock the jack into place at different heights. And also swivel out flat bars underneath, to add to.stability on the ground. As i said, when you adapt an idea....don't copy it....improve it I just thought of these ideas while seeing your design. But great skills, just think out of the box
That's amazing....!! I love the way build it. 👏👏👏 But i have count about the cost to build it.. Thingking about the money to buy the part of them.. Like as nut, iron, the other and spend many times for make it.. It will be more expensive than i buy 1 in the tools store.. 😁 cause now.. Many brands with cheap price And strong enough to make the car move up... 😁
Great work...solid design overall. I would however used a more efficient design where it would use a 3/8 in rod bent at a angle with a pivot point where it connects to the threaded rod where it could be turned continuosly without hitting the ground and with the user standing instead of kneeling... Gotta save your knees and back
utterly useless video unless you have access to a lot of scrap steel . and the amount of weight you can lift is going to be not very much which is the reason you never see many of these around
Altamente agradecido personas como tú hay muy pocas con esa amabilidad para enseñar que JEHOVÁ DIOS te esté bendiciendo por siempre
Excelente trabajo gracias por compartirlo
Saludos desde Valencia Venezuela
Thanks man
Great Tool. Simple and clean steps. Thanks !
Thanks dear
Great tool. If I could suggest one thing. Shorten the jack arm to bring the jacking pad inside the wheel base. When you jacked the car up the jack was front heavy and could lead to the jack tipping forward.
If you bring the jack pad between the wheels it will be more stable.
Ok thanks for your suggestion
Está muy bueno e interesante ese gato mecánico pero te faltó algo muy importante.......es las medidas de los hierros
I'm not an engineer, but i think, if you can tilt the whole system, with the handle a bit higher like about 8 inches off the ground, it can be good for cars etc and you can keep rotating it without having to shift levers from side to side
Parabéns pela belicima ideia muito top
Great build......I could probably make it out of pieces or cut offs.
Thank you very much dear❤
Хорошо что подшипники не приваривает, и то греет шайбами. А в целом норм.
Excelente maestro ,gracias desde lima peru
Excellent 👏
Thanks dear
With this metak thikness you can lift truck
Axial bearing after the crank and it becomes easy to wind.
Ok thanks for your suggestion bro
Mantap sangat membantu, salam persaudaran 👇👇👇
Thanks bro
Ok kak sama2 👇👇👍
Podrías fabricar una unión tipo articulación de la dirección de la columna de auto,así tendrías menos cerca del suelo la manivela para subirla. Y la base donde se apoya el auto que sea fija para evitar se incline estando arriba el auto
Ok thanks for your suggestion bro
Exelente trabajo amigo..gracias por compartir, saludos desde Perú.. y bendiciones y éxitos
Thanku
One fault is there it will be highly jam because no bearing is given in front screw.
Ok thanks for your suggestion bro
Adapted idea from conventional scissor jack, but well made. Just some input.
If you not going to give dimensions then take out all the "cutting " of material, channel,round bar, flat bar,etc....we know how to cut, just adds time on the video.
And more importantly, you could hsve added safety rod into the frame as to lock the jack into place at different heights. And also swivel out flat bars underneath, to add to.stability on the ground.
As i said, when you adapt an idea....don't copy it....improve it
I just thought of these ideas while seeing your design.
But great skills, just think out of the box
Very well done mister good job
Thanks dear
What is the size of each material? square profile cylinder nuts
40x40 ms square rod
Boa noite 👍👍
Very good Idea
Thanks bro
May i ask what are the dimension sizes?
Good job
Could please share dimensions of pieces used thanks a lot
Sorry I'm not having the design plan
Great,thanx
Thank you
GREAT
Thanks man
Exelente
Thank you very much ❤
Super🙏🙏🌷🌷🌷👍👍👍
Thank you so much dear
That's amazing....!! I love the way build it. 👏👏👏
But i have count about the cost to build it..
Thingking about the money to buy the part of them.. Like as nut, iron, the other and spend many times for make it.. It will be more expensive than i buy 1 in the tools store.. 😁 cause now.. Many brands with cheap price And strong enough to make the car move up... 😁
Ok thank you
Muito bacana,vou fazer um...
Thanks dear
Muito top demais parabéns 👏
Thanks dear
Great job, it is very useful
Thank you very much
Great work...solid design overall.
I would however used a more efficient design where it would use a 3/8 in rod bent at a angle with a pivot point where it connects to the threaded rod where it could be turned continuosly without hitting the ground and with the user standing instead of kneeling...
Gotta save your knees and back
Thanks for your suggestion
paimas bhi btaya kro
عندك.خطاء.الاكص.والفيربلان.لي.سوديتي.لهم.الرونديل.خاصهم.اجيو.من.تحت.التيب.كاري.لكيطلع.باش.اكون.صحيح.وشكرا
🏳️🌈🎰🇮🇩🗾🌍🌃🏳️🌈. Amazing tekhnologi.
Thanks man
🔥🔥🔥🔥
Thanks bro
Good stuff Daimelion! I would like one of those jacks.
Thanku
Почему снизу приварено? Чтобы комментариев было больше?
замудишся крутить.
Põe uma catraca aí sô 😃
Por favor las medidas gras si es amable
💯💯💯😘😍🥰🥳
Thank you very much bro
с такой ручкой задрыкаешся на карачках поднимать
Katna dam hai aur kaha milega mobile dejey ga
good idea!! but did not take into account the safety of the head...
Thanks man
Qual a medida das peças
Dimension de las pieças
Te felisito
Thanks man
que medidas
Waste of time, easily available in tool shop
تم شكرن عمل را يع
Ji
это извращение.
utterly useless video unless you have access to a lot of scrap steel . and the amount of weight you can lift is going to be not very much which is the reason you never see many of these around