TRACTOR AND MACHINERY TOUR PART 1
Вставка
- Опубліковано 12 вер 2024
- In today’s video we are doing part one of the tour of all our machinery. Part 2 will be tomorrow....
For merchandise, go to my website www.gerry6420....
hope you enjoy the video
Don’t forget to hit the subscribe button if you enjoyed this video....
Also don’t forget to follow me on Instagram Snapchat and Facebook just search Gerry6420
Alternatively click on the links below :
Instagram... / gerry6420
Facebook.... / gerry6420
Nice to see the kit looked after properly Gerry 👍 good video again 👍 and a big thank you for the merchandise really pleased with it and considerin am a 52inch chest measurement the 2xl fits perfectly quality and the logo are awesome 💪💪
Bob Paterson supper.... delighted it arrived. I ment to email you back.... I will later 👌😊👌
Nice to see men look after there machinery and keep a tidy place, credit to ya’s Gerry 👌
IFarm WeFarm thanks 👍 your along the same lines your self in fairness. Pays to look after your gear.
Nice to see you keep your kit nice and clean
James Martin yes well it pays to mind it and keep it right
A shed full of top class machinery
Cormac Nugent it’s not too bad Adam.... it’s took 25 years to acuminate.
Nice kit u have
paddygoesracing thanks 👍
Great video. Fine machinery and shed. Top class. Credit to you sir
bambino head2 thanks bambino.... long time collecting it all up and take time to keep it maintained both mechanically and cosmetically but it does pay off
Great video nice bit of kit 👍 good to see it all nice and clean in a shed 👍(not jealous at all 😭)
Antony farming thanks antony 👌👍😊
The machinery is spotless, a credit to you. Tell me this Gerry, do you spray burnt oil or diesel on it when in storage?
Panchdeburca not usually but I have done on things in the past. Good job for keeping the paint
Great video Gear is spotless you’re a tidy man 👍
Seamus Power thanks seamus 👍
Machinery kept in top class condition
John McCasthy thanks John 👍
Great video nice machinery
Philip M100 thanks Philip
Should be proud of your self keeping your kit in that kind of condition. Credit to you. Bit like me always like a clean machine 👌
Thank you. Yes really does pay off to look after your machinery 👍
gerry6420 it sure does. My dads face is a picture when I have tins of paint arrive quite often to give the machinery a spruce up. 😂
Very good video have been wanting this for this for a while
model irish farmer good stuff. Glad you enjoyed it
Great video Gerry as always hope your going well😀👍👍
Sean O'Brien were hanging in there 😊👌
Nice gear Gerry real nice👍🚜
Paudie Sheehy thanks paudie
Love your machinery you keep it well
Was that classed as begging for a 6 rotor there gerry??😂. Glad I bought a 6 rotor because by heck it speeds the job up from a haybob! Gotta say, you do keep your gear clean and spot on 👍
They really should be changing it for me. All the publicity and selling of their tedder I done. 👌 well if u mind it, when it comes time to change it, it’s worth something still when it’s in good nick
😂aye i'll give you that one! Doubt my tedder will be worth anything by the time I'm done (I should have said, it's not a male, couldn't afford one of those but an old feel a 😣) it's half broke as it stands 😂
gerry6420 preach that brother 🙌🏻
OMG i wait for this vid so long
HayField_7710 well here it is... hope you enjoy it 👌👍
Toys for big boys!!!!!
Blessed to be independent in this day and age bud!! Any plans on trailing shoe or dribble given the directives to come Ger???
Maurice Cahill dribble bar probably. I’ll wait til the very last I think. Unless someone wants to sponsor one to me 😂👍
@@gerry6420 Ya never know kidddd!!!!!
#mastech
Serious gear there lad
James O Brien thanks James. Yea some good machinery.
Yiz have some kit Gerry 👌🏻👍🏻
A L thanks A L
👍🏻👍🏻
Doyler 1979 👌👍
Good video. What do you think is the best bit of machinery that you have bought
Anthony O Donovan redrock tanker has been super. Done a lot of work. Never missed a beat.... jf900 has been very good too.
Seems you dont have a fertilizerspreadee? So your only fertilizing with muck/slurry and sprayer? No solid fertilizer? Just curious!
Would you keep your machinery fresh or work them til they wear out Great video gerry 👌
Pat Hickey depends some we keep long term and keep it maintained. Some we change if we were maybe changing system or changing for something bit bigger. Anything we’re changing always in perfect working order.
@@gerry6420 Gerry ur machines are immaculate condition did you read the cost of keeping a suckler cow in the farmer's journal this week I feel Sick we are at Notting an expensive hobby lad 👍
Is that Ur push bike there at start Gerry ? Lol 😂
james gregg yes I need to use it to know some weight off myself 😂👍
@@gerry6420 could do with one myself lol
And theses no money in beef😂😂😂
Cathal S rotten with money.... you should see the bank balance.
Would you ever consider switching to a silage wagon Gerry??
Farming with Finesse yes. I would. Think it’d be a good job. Man on the wagon and man on the pit is all you need. Cuts down on men and machinery
Fabulous machinery Gerry. I have been looking at a identical mower to your small one with intent to use it for topping as well as mowing.. would topping with a conditioner mower be a wise move..?????
Yes they will top. They don’t have adjustable slides for adjusting height but they’ll cut well
Conditioner won’t be an issue. Open the windrow doors up.
Cheers Gerry... should have bought the one you sold last year.. but unfortunately had emptied the piggy bank on a different machine..
Actually do need to do much topping and do u always use the topper..
james o neill yes another guy from cork bought it who follows me on here. He was going to mow his own silage with it. It was a good mower. I top every year. Anywhere grass gets away in grazing and can be stemmy it’s a good job to top it. Give you nice fresh regrowth
Hi Gerry if you were to buy another piece of machinery what would it be ?
Either change our large silage trailer to a 14/16 ton, get a dribble bar for our slurry tanker or change our 6420 for a 6155r..... one of those 3 things.... cattle prices would need to change though.
I live next door to Clark's machinery
Andy Kane very good. Good bunch of lads they are
Would you say you limit the JF fct900 to 50 acres, & is it a bit small for 200 acres
No not at all. If you were a dairy farmer cutting lighter crops and plenty tractors drawing you could lift 50-60 acres a day, maybe more .... I lifted 40 acres in a day.
Please show David's browns
Stephen Lee I will
Hi Gerry, hope you're well. Had the JF got a pick up hitch? If so why not fill yourself then you'd only need one tractor carting.
I should have said one less carting.
Robert Higgins yes it has a hitch. Just is faster with 2 tractors especially on the longer draws. But I’d field we’re close to the yard I could hitch on and do with 1 tractor
purchasing a round baler in the near future??
manu alvarez not at the minute... maybe I’m future.
If your ever changing your tedder let me know
Mark Ramsbottom ok mark
Gerry what are the economics of having all that machinery.
does it add up?
Wouldn't think so between cost, depreciation, time to do the work I would say alot of it wouldn't be worth it. Only advantage is doing a job when you want but is it worth its costs
bill carroll yes and no..... deprecation of machinery isn’t too bad on most stuff.... keeping stuff good pays. For example.... bought new amazone Fertiliser spreader in 2004 €4500.....sold it 2018 for 3000€. Our last mower bought in 2009 for 4900k sold in 2019 for 3500€.... silage harvester cost 4800€ when we had it up and running.... so lay out on those machines have been small and payed for them selfs easily. Sprayer and the new mower are long term investments and will do us a life time. But cutting our own silage.... 100 acres roughly a year, contractor would be in the region of 10k. Costs us around 3500 with desiel and pay a man to draw. In 4 years the saving on silage will pay for the mower. Not counting that mower also cuts 50 acres of hay and 25/30 acres of round bales. Tractors havnt deprecated that much. 6420 cost 52k in 2004.... today it’s worth 30k in the condition it’s in. €1300 loss a year..... 6930 58k in 2014. Today what’s a 6930 with 4400hr in that nick worth. €50k. Telehandler cost 32k in 2007.... still worh 25k at least. Seen one make 27k last year. We slurry all through the slurry season. 100€ diesel will slurry all day. Contractor is 40€ an hour. Savings in there when you have the machinery. As I said looking after it and keeping its value up is key.a lot of our stuff is bought second hand, in good condition, and kept for a long period. If you decide to quit or sell stuff you have good chance of selling close to what you paid. The new mower and sprayer are the exception. We will feel the full deprivation of those. Even though acre count will be small on both compared to most bought new..... other side of it is if we paid a contractor to do everything we do and had no machinery we probably wouldn’t be in business.
Micheal O'Donovan above
When's the fs19 vid
The Chicken Channel didn’t do it yet.... It’s on the cards.
Any word on change up on tedder I put in good word for ya with Malone
Patrick Oconnell good stuff. What did you say 😊👌
@@gerry6420 your there biggest sales man only for you I not bought a six rotor Malone told them you should get free rake