Made my own button controller based on the midi fighter. 3d printer and some arcade buttons. I use it for some extra button mappings in OBS for streaming.
Love the look of these. Only issue I have is my Saturday DJ booth is dark and I couldn't see if my knobs were at 12oclock or not. I had to lean in to view. Perhaps a white line instead of black would help. But overall I like the look of the gold chrome.
Chroma caps are cool. I use them to customize and be colour aligned to layers. I'm with you I think I prefer the rubber ones over these for grippiness. Only issue I've found is fader caps can be a little wobbly on my Allen and heath mixer.
Thanks for enjoying them! Yeah, faders are hard to get anywhere near a one-type-fits-all situation. We're looking at expanding our line later this year to improve fader fit (ideally on A+H and on Pioneer battle mixers!)
Just bought a Pioneer EFX 1000 which was missing the time knob for dialing in BPMs and stuff. Unable to get one in the UK for under $50 but wad able to get a friend to 3D print one which works perfectly
yes glow in the dark chroma caps and 12 inch skinz wrap for CDJ-3000 and Tour-1 mixer. Was thinking about replacing the IEC d-plug on the back with a locking one like the CDJ-3000's have.
Side thought, why are trim knobs always so small? smaller knobs are less capable of fine tuning yet the trim requires lots of micro tuning IMO. I've always wanted to put a super knob on my trim knobs but there is not one offered with the correct orientation
Had rubber caps n fader’s the rubber or the faders didn’t take long to start peeling with little tiny bits falling of into the mixer , looked cool for five minutes
Heads up that - at least with Chroma Caps - that shouldn't ever happen. Our support team will absolutely replace any knobs that have an issue like that :)
Made my own button controller based on the midi fighter. 3d printer and some arcade buttons. I use it for some extra button mappings in OBS for streaming.
I just got a set of Golds for my Rane TTM 56… Love em
I’ve had both of my Allen & Heath Xone mixers with Glow/Red chroma caps for years now
Very cool product! I need to switch up the colors on my Denon DJ X1850 mixer...so many black channel fader caps and knobs. Thanks for the tip!
Love the look of these. Only issue I have is my Saturday DJ booth is dark and I couldn't see if my knobs were at 12oclock or not. I had to lean in to view. Perhaps a white line instead of black would help. But overall I like the look of the gold chrome.
Chroma caps are cool. I use them to customize and be colour aligned to layers. I'm with you I think I prefer the rubber ones over these for grippiness. Only issue I've found is fader caps can be a little wobbly on my Allen and heath mixer.
Thanks for enjoying them! Yeah, faders are hard to get anywhere near a one-type-fits-all situation. We're looking at expanding our line later this year to improve fader fit (ideally on A+H and on Pioneer battle mixers!)
Just put a rizla under the cap lol
Just bought a Pioneer EFX 1000 which was missing the time knob for dialing in BPMs and stuff. Unable to get one in the UK for under $50 but wad able to get a friend to 3D print one which works perfectly
yes glow in the dark chroma caps and 12 inch skinz wrap for CDJ-3000 and Tour-1 mixer. Was thinking about replacing the IEC d-plug on the back with a locking one like the CDJ-3000's have.
I love the gold chrome knobs but the for the faders that’s why I build my own brass fader caps
LOVE THE STYLE AND LOOK OF DENON DJ PRIME GO WITH THIS CAPS, LOVE THE MIDIFIGHTER TWISTER.
Gear that typically gets customized a lot are legendary grooveboxes like the Roland SP and Akai MPC series.
“…Every time I come around your city, bling, bling…”
i have the Rane v72 mk 2 but boy that 70 A Track with gold knobs is the business
Side thought, why are trim knobs always so small? smaller knobs are less capable of fine tuning yet the trim requires lots of micro tuning IMO. I've always wanted to put a super knob on my trim knobs but there is not one offered with the correct orientation
Which orientation / what mixer? :)
@@djtechtools in a perfect world, i'd want a fatty knob in 90 degree for the pioneer 900nx2
I have a djm S9 with a plain white skin, sides and bottom are white carbon fiber.
Had rubber caps n fader’s the rubber or the faders didn’t take long to start peeling with little tiny bits falling of into the mixer , looked cool for five minutes
Heads up that - at least with Chroma Caps - that shouldn't ever happen. Our support team will absolutely replace any knobs that have an issue like that :)
I cant wait for the silver ones
Us too! Shouldn't be too many more weeks now....
word
lol "everything dies baby". Not quite...may I introduce you to knurled ss304 knobs.
Awesome video
Thank you
Imagine silver caps on a 57 and an efx 500 le. TOIGHT!
Us DJs are a pack of knobs so now my gear can match
Or use a tin of chrome spray paint and a fine permanent marker pen : )
Cheesy and it will increase thefts…
Waste of money.Put a adjustable bendable light and u can see ur whole dj system.it costs 15dls or less
tacky AF
Not good to the eyes
Djtechtools🙌🏻