How to by-pass Mercedes Benz ad-blue no start condition
Вставка
- Опубліковано 10 сер 2021
- By pass ad-blue no start condition when you are running low ad-blue level or your tank is damaged.
This temporary solution gives to your car 800 km counter to refill your tank or repair the issue, if you don't refill or repair the tank you can reset again with this same process.
Only need a ELM327 BLUETOOTH SCANNER (5 bucks on ebay)
a smarthphone and TORQUE LITE (free at play store)
thats it! - Авто та транспорт
Any idea how you would do it with an autel one? Thanks
can you please tell me witch make model you bought of ebay or come and do mine in cov pay you
Just buy ELM327 Bluetooth, is a blue dongle, nothing fancy, about 5 bucks in Amazon or ebay
Hi, I have same issue with a 2009 ML 320 Bluetec telling me zero no starts.
I currently have an Xtool D8 with the BT dongle...will that dongle work with the torque lite app? Or can my Xtool D8 do the reset on its own?
turn ignition on, plug dongle, clear fault codes. done. 800 km of starts safely. or go to merc, w164, bluetec system and reset start counter in special functions.
@@serverdll Hi, it didn't work with the torque lite app, telling me no codes stored on the ECUO
@@leroyjohnson4973 with xtool D8 you can go to special functions in post treatment features and reset counter
Hi, I have the same year and model car as you with the same problem. Do you mind telling me how you managed to fix it? Thanks
Do you get one of those plugs with the car?
Buy it from eBay, 5 bucks
So if the engine is locked, threre is need only to read and erase the fault? Really?
I'm asking, because my counter is on 689km till "no engine start".
Yes sir, just read the codes and the chime sounds and you are done.
@@serverdll I will try soon ;). It is standard diagostic tool? Nothing specificated with some root or crack?
@@roachwrc1620 to mantain cheap posible i do with a elm327 5 bucks Bluetooth scan, torque Lite Is a free app from play store. Nothing fancy
@@serverdll I have iCarsoft and I hope it will be enough. I give a feedback soon :).
Last question - if I drive and on my counter is 50km, but I have to go 100km, then the engine stops after this 50km or can I reach my target 100km away?
@@roachwrc1620 so, do you do it?
Tried this on 2012 gl350 and it didnt reset start counter, any ideas?
works on all bluetec mercs... try reset counter in special functions with a more capable scanner
@@serverdll does the counter need to be at zero before a reset, so a better version of torque lite or a different scan tool? any suggestions?
@@blairjensen1911 counter must be 0 to reset, works only in a not start condition.
@@serverdll i am chicken lol
@@blairjensen1911 did it work?
That can't be true! Only by clicking logged and without erase?
some systems require erase codes (first adblue versions) lastest adblue systems 2018 -> just read and done. car was a w166 gle250d 2018.
Wait...just readong the fault codes reset it?
actually yes, very weird stuff, works on w164 and w166
@@serverdll
Are you sure? Will try it on my W166
@@irfancayirli7860 this method save me for about 6 months, no joke about have a nice Merc dead in garage.
@@serverdll
Have tried it but no chance. My car is an ML 350 from year 2013. It can still start, but shows no start after 300 km (at beging 800 and counter down). If i click show logged faults, it really show me an fault code and this code is not eraseable: P16D400. Only with Xentry and vediamo as i heard. If possible make a video without any cuts, so i will believe it. Anyway thank you.
@@irfancayirli7860 this method works ONLY IF CAR NO START AND SCREEN SHOWS 0 KM TO START OR "NO START CONDITION" if you have for example 100 km to not start this will not work. use this only if car not start at all.