Cadlink, Epson expression 15000 - What's wrong if i cannot click onto set color order? It's listed within the que, but not lit up to be able to click onto it? I'm able to go into properties and other items at the bottom in the que, but can't click onto set up color order. Help.
When I upload any photo to cadlink, the quality is terrible on the preview side, even photos that come directly from their test pages. It’s grainy, blurry and ineligible. Any solution?
I have an epson 8550 and cannot get my printer to print using the CadLink program. I've got it installed but not sure how to set anything else up since it will not connect
I installed CadLink 11 and my Epson 8550. I get my graphic up. I resize it to a 10x10 print but when I hit Print it does not start printing. What am I doing wrong?
Hi, I have a problem if you can help me please, it is printing just the middle of the image instead of the full image I don't know why, can you help me please?
@@jace2077 somebody told me to uninstall and reinstall cadlink and I did and it worked. But I made a print and the colors came out bright than the image I don't know why
I figured it out it has to do with the paper reader sensor I use 2 pieces of painters tap from side to side of the paper I place it on the side I’m not printing on or Matt side of you will that fixed that issue for me
Hi, I'm installing this software and using xp15000 but can't seem to find xp15000 driver on the create queue wizard. Do you have any ideas on how to install this software using the xp15000. Thank you.
That mean the printer is not seen the full film since they are semi transparent. Put more paper on the back for support , cover the sensor of the printer with masking tape or put some masking tape at the border of the film so the printer can grab it better.
Hello, hopeful someone could help me I do the set in order but it is grayed out how can I get this option to select my ink order? I can print but it won’t come out with the white in at all or the white coating on the back.
Hi! I just bout an A3 L1800 DTF Printer (from China) The RIP software they sent is absolutely horrendous! Will this software work with my model? If so, do you have a purchase link? Also, is it a software download only or do I need to have the CAD USB connected?
hi my printer is only printin part of my image. matter of fact just a section of the middle in a rectangle how do i fix. my preview shows the entire picture but thats not what its printing
Probably the printer is not seen there is a film there. Try to put masking pate on the back of the film so the printer can be recognized there is something there. That can happen with some printers like xp15000 or et-8580, but not with printers like L1800, p400, p600, and others.
Hi...I noticed the subject says et-8550, does this software work with that specific printer as well? Also, noticed it says XP-15000, does this work with the ET-15000 as well? thanks
HEY HOW YOU DOING ? I HAVE A QUESTION MAYBE YOU CAN HELP ME WITH. SO I HAVE CADLINK DTF WITH MY EPSON 8550 RIGHT. SO FOR THE PAST 2 DAYS EVERYTIME I TRY PRINTING MY IMAGE USING MY CADLINK IT DOESNT PRINT THE WHOLE IMAGE. ITS ONLY PRINTING HALF OF THE IMAGE. WHAT DO YOU THINK ITS THE PROBLEM?. THANK YOU.
I have an xp15000, i have followed all the videos and directions but I can't print, it goes through the whole process but no ink comes out, what am i doing wrong?
when is new, you need to do an ink charge so the inks coming out. If is not new and you use already, do maintenance on the printhead, if left without cleaning can clog white channel.
Hi! I am new to this software, but for some reason, every single time I print, it stops halfway through and says Unknown Error. This does not happen with any of my other programs, just this one, so it's not a problem with the printer. What do you think it could be? How do I check this kind of error? Thank you.
I've fixed by connecting thru wifi connection. Connect your printer to your wifi router then in the manage queues select TCIP/IP (Network) for the port selection scan and select your printer.
Correct. Now, to be able to use on mac you need a second software call parallels, you can read more about it here kingdomdtf.com/collections/software/products/parallels-for-mac
Hi, im new to dtf i have a modified epson 3880, but my colors are way off, or its darker than on screen, i see lot of people print very nice prints and vibrant colors without icc profile, but i cant get good prints, i use inkbank inks and default settings i tried 1440x1440 ( the print quality is better than 1440x720 but very very slow) 1440x720 the speed is amazing but prints come out very grainy, maybe you can have some solutions to my issue , im ready to pay for someone who can help me to set up the software, thank you
Hi, i have a duel head xp600 printer, how do i setup the color for this printer?
Cadlink, Epson expression 15000 - What's wrong if i cannot click onto set color order? It's listed within the que, but not lit up to be able to click onto it? I'm able to go into properties and other items at the bottom in the que, but can't click onto set up color order. Help.
When I upload any photo to cadlink, the quality is terrible on the preview side, even photos that come directly from their test pages. It’s grainy, blurry and ineligible. Any solution?
Hi. Please tell me how to configure the color profile.The prints are pale. I have an Oki pro 9420wt printer. Thank you in advance🤝
I have an epson 8550 and cannot get my printer to print using the CadLink program. I've got it installed but not sure how to set anything else up since it will not connect
Same here! Have you been able to figure it out?
I also am having this issue, were you able to get it resolved?
I have an epson L1800 but it just printing black and gray, what im doing wrong? Thanks for the help!
Great pro video, thank you.
I installed CadLink 11 and my Epson 8550. I get my graphic up. I resize it to a 10x10 print but when I hit Print it does not start printing. What am I doing wrong?
What does it say? Are you using dtf film?
My set ink order is greyed out. How can I fix in order to setup ink correctly?
On cadlink if I'm not mistaken when you install the driver the ink order is already set up.
@@KingdomDTF mine was setup differently but I ended up figuring it out
Same thing is happening to me.. I have Mac. Cab you help ? I purchased thru you
@@tenajahrouse72 I hear it's not compatible with Mac.
When trying to set up ink order it says I can’t have more then one??
Can someone please help me I printed my first print but it came out all black I’m not sure what I did wrong
Hi, I have a problem if you can help me please, it is printing just the middle of the image instead of the full image I don't know why, can you help me please?
Im having the same issue not sure how to fix
@@jace2077 somebody told me to uninstall and reinstall cadlink and I did and it worked. But I made a print and the colors came out bright than the image I don't know why
I figured it out it has to do with the paper reader sensor I use 2 pieces of painters tap from side to side of the paper I place it on the side I’m not printing on or Matt side of you will that fixed that issue for me
Hello, How can I download the v2 driver for my l1800? I can't setup my color order. Thanks
Hi, I'm installing this software and using xp15000 but can't seem to find xp15000 driver on the create queue wizard. Do you have any ideas on how to install this software using the xp15000. Thank you.
type epson and it will show all the available printers.
Hi I followed all the setup videos but everytime i print it only prints the center strip of every image, is there a setting im missing?
That mean the printer is not seen the full film since they are semi transparent. Put more paper on the back for support , cover the sensor of the printer with masking tape or put some masking tape at the border of the film so the printer can grab it better.
Hello, hopeful someone could help me I do the set in order but it is grayed out how can I get this option to select my ink order? I can print but it won’t come out with the white in at all or the white coating on the back.
Install the correct driver with v2. L1800 v2, xp15000 v2, 8550 v2, etc. you are using.
How do I fix lines in my image that allows the white underbase to show when printing?
Did not understand your question well. Try doing head cleaning.
Hi! I just bout an A3 L1800 DTF Printer (from China) The RIP software they sent is absolutely horrendous! Will this software work with my model? If so, do you have a purchase link? Also, is it a software download only or do I need to have the CAD USB connected?
im new to this and for some reason my set ink order is greyed out and im using an epson xp 15000 any suggestions on what that could be.
Need to install the driver for the printer.
hi my printer is only printin part of my image. matter of fact just a section of the middle in a rectangle how do i fix. my preview shows the entire picture but thats not what its printing
Probably the printer is not seen there is a film there. Try to put masking pate on the back of the film so the printer can be recognized there is something there. That can happen with some printers like xp15000 or et-8580, but not with printers like L1800, p400, p600, and others.
Hi...I noticed the subject says et-8550, does this software work with that specific printer as well? Also, noticed it says XP-15000, does this work with the ET-15000 as well? thanks
Yes, we sell this software and many customers have ET-8550.
the program is not able to find my Epson ET-8550 only the Epson ET 7500
I'm sure ET-8550 is there, we sell this software and many customers have ET-8550. It will show as ET-8550 DTF v2
HEY HOW YOU DOING ? I HAVE A QUESTION MAYBE YOU CAN HELP ME WITH. SO I HAVE CADLINK DTF WITH MY EPSON 8550 RIGHT. SO FOR THE PAST 2 DAYS EVERYTIME I TRY PRINTING MY IMAGE USING MY CADLINK IT DOESNT PRINT THE WHOLE IMAGE. ITS ONLY PRINTING HALF OF THE IMAGE. WHAT DO YOU THINK ITS THE PROBLEM?. THANK YOU.
When this happens people usually put blue painter's tape or masking tape to the back of the film at the edge so the printer reads better as "paper".
I am getting a error “can’t connect” while trying to print or test print from cadlink.
Need to check the setup of the port, USB or IP.
I am having an issue with my xp15000 starting print 2 1/2-3" down the sheet. How do I adjust that?
Try to put masking tape or painter blue tape at the border of sheet since xp15000 sometimes don't see the film.
hey this video is not to found how to install and set up your printer in digital factory DTF edition why is it gone i need help with my printer
Yes, we have many videos in our channel ua-cam.com/video/uf16_tLTXI8/v-deo.html
What do I do when my set ink order option is greyed out?
You need to install the driver of the printer so you can set up correctly.
How do you print white on just your image? My entire page was filled with white
design need to have transparent background.
Where can I find this setting
In the software
hi,
what is the difference between small and large as seen in internet shops
small and large?
I do not have cadlink, but I want to buy it for DTF with ICC Profile Creation Addon, for that Do I need to purchase Cadlink twice?
Cadlink is the rip software, the icc profile creation is an add-on module for the software, they have deferent pricing.
I have an xp15000, i have followed all the videos and directions but I can't print, it goes through the whole process but no ink comes out, what am i doing wrong?
did u find a solution? sort of having the same problem
when is new, you need to do an ink charge so the inks coming out. If is not new and you use already, do maintenance on the printhead, if left without cleaning can clog white channel.
Hi! I am new to this software, but for some reason, every single time I print, it stops halfway through and says Unknown Error. This does not happen with any of my other programs, just this one, so it's not a problem with the printer. What do you think it could be? How do I check this kind of error? Thank you.
sounds like a software issue, I recommend calling Cadlink 1-888-744-6522
I've fixed by connecting thru wifi connection. Connect your printer to your wifi router then in the manage queues select TCIP/IP (Network) for the port selection scan and select your printer.
It's because you didn't set up or download the right printer driver
Is Cadlink only for PC and not Mac?
Correct. Now, to be able to use on mac you need a second software call parallels, you can read more about it here kingdomdtf.com/collections/software/products/parallels-for-mac
Hi, im new to dtf i have a modified epson 3880, but my colors are way off, or its darker than on screen, i see lot of people print very nice prints and vibrant colors without icc profile, but i cant get good prints, i use inkbank inks and default settings i tried 1440x1440 ( the print quality is better than 1440x720 but very very slow) 1440x720 the speed is amazing but prints come out very grainy, maybe you can have some solutions to my issue , im ready to pay for someone who can help me to set up the software, thank you
3880 is similar printer as R2000 and they print better in 1440x1440. I can say make an icc profile for that printer, inks and films you are using.
i just want the white behind my image, its printing the whole page white
You need to remove background from the design.
hi does this version work with epson stylus 1390? thank you
Yes, by using L1800 driver should run that model.