DIY hookah depth test
Вставка
- Опубліковано 3 жов 2024
- We answered a couple of common questions we get and did a depth test on our DIY hookah rig and chased some fish around the marina.
The depth was checked on a leonardo cressi dive computer.
As we get closer to getting our boat ready to sail we look forward to learning to sail and doing some wreck diving on the lake.
Please like, share, and subscribe and thank you for watching.
For the air intake there is actually small filters already made for compressor you can buy. "Compressor air filter" or just 1/4 or 3/8 air filter. can find them cheap.
Have 2 of the same regulators, never had a problem with it (i guess you already know you put a screwdrive inside the hose screw to adjust it, no real need to open the front cover) if its hard to breath its due to low pressure from the compressor.
I would suggest you to add 2 water/oil filter after the tanks it may not seem necessary since its an oilless design but there is alot of condensed water being shoved down your lungs which happens thanks to pressure. In my setup i have 3 filters in a row and manage to get water in 2 water/oil separators only the 3rd is empty.
Watched your DIY build before i actually decided to test it myself. due to lack of 12v compressors around here and parts i just went with a 220v oil less compressor and inverter instead it works amazing and since its a more powerful compressor we can run 2-3 people.
The audio is a little difficult to hear and I missed the brand of that pump. So glad I researched options before starting this project.
I think he shared the brand in a previus video. Brand is Soyus, model ACQ-910
The brand names change frequenly as it is china.
Thanks for the info... got my build idea from someone else tho I got it to work from this vid n a bit of tinkering...
Tho I almost made my mouth piece leak non stop. Basically I f"d up bad n had to take it completely apart but found a flat head where the mouthpiece attaches to the airline.
Long story short theres a brass fitting that turn right for less air turn left for for more... with a combo of the 6mm nut inside and the brass fitting where it meet the hose I got mine tuned awesome!
Glad it helped
I was this close to by buying a ryobi or dewalt battery powered compressor lol
New sub. Greetings from Switzerland. I am thinking of building one myself so thank you for the information
Can't back off adjustment nut on regulator to work with this low pressure setup,need to get using 5mm socket...what's the trick to popping off cap on side of this reg..seems glued on real good..thanks
I solved the issue...😊
thanks for the video and information i have purchased acq 910 but am finding it a little difficult drawing air with the regulator...
Look up how to adjust a second stage. There is a flat head screw inside the port where the hose attaches. Hope this helps.
@@MegaFPVFlyer where can I DM you the photo
@@sujstet @sujstet somebody else mentioned that some cheap regulators don't have an adjustment. If you disconnect the hose that attaches to the reg, there should be a couple of slots that let you screw the adjustment screw in or out with a flathead screwdriver. ua-cam.com/video/wkU2OB_fkVg/v-deo.htmlsi=iavu11PThY18sLvZ
Could you redo the video editing and get the volume up? Thanks
Great video, I am building one of these and have most all the parts purchased. I did get the same cheap Chinese regulator and am wondering how you adjust it. All other regulators are adjusted with a screwdriver after removing the air hose. There is no slot for a screwdriver in this opening. Do I need to remove front cover, loosen lock nut and turn out the mechanism on the inside to make adjustment?
Thanks!
It has the same adjustment screw as other regs.
Che pressione massima può raggiungere? grazie
would that pump run off a small 12v battery for a decent amount of time? I want to build this in a floating tote setup for metal detecting. any advice appreciated thanks!.
Varies with conditions 10 amh lithium maybe 45 min to 1 hr.
How has this held up? Are there rebuild kits available for the pump?
Thanks
I want to buy that compressor
Great info but the audio is not good
how many liters per minute is that pump 120lpm or the 160lpm
160 lpm but its only at about 17 psi. Even the lenght of hose will effect delivery of air as well as depth and interior diameter of hose/ fittings. 1 person at best use.
Thank you for the info !! I'm planning on building a very similar unit for myself. Big question, how do you go about adjusting the Reg?
Does anyone know how much pressure this compressor puts out? Thanks
I think I've heard 17 psi. they all seem to be the same. Technically there low pressure, low head aquarium/pond air pumps.
The pro sys use higher quality, better rated pumps with much higher outputs 50-90psi.
This is what you call a budget cheap system. Any strenuous activity is dificult and dangerous. Best for 3-6' up to 6-10' with Low/little activity.
Is this the ACQ 910?
May I ask how many watts is this aerator?
120 watts.
Is that a 60w motor,120liter per min? Or a 120 watt 160 l per min? Thanks
I recently built a similar set up... go with the 160 liter per minute pump.
@@CrackerJackson101 yes,I will order in a couple of days.thax
.
Like he says in the video, remove the little rubber plug located just above the mounting feet of the pump, for sure... youre welcome, and good luck!
@@CrackerJackson101 how long have you ran your 120 watt 160 motor? Temps stay good?Have you used it at 10 ft depth yet?..just Want to get an idea of what to expect..thanks for the information..
Thanks for the build. I'm getting ready to build a similar system possibly using left over fire extinguishers. My question is, how is the ACQ compressor holding up? I can't find one locally here in central Calif. so it has to come from China and is 2 months away. Would you do it again? Thanks for the help.
I had to order my pump from china as well. The pump has close to 40 hours on it with no issues. Yes, I would build it again. Good luck with your build.
Thanks for the speedy reply, Sir. I'll get 'er comin'.
@@sailingboreas1062 Hey Dave, found a compressor Amazon says they can get to me in 6 days Prime (no shipping) at " HEALiNK DC 12V 160LPM/Min 2536GPH 120W Aquarium Air Pumps Aquaculture Fish pood Pressure Compressor Aerator" for $90 if it helps anyone else....and they come through.
I built a similar system with the same regulator 'cept I used a 3/4 hp 2 gal. Sanden compressor from my garage. It worked great for cleaning the bottom of my old Ericson 29 except it would trip a thermal switch after about 40 minutes. I'm assuming I was just maxing the duty cycle with all that scrubbing.
Hopefull the ACQ 910 wont have the same issue as it's designed to run constantly. (100% duty cycle?)
I do have a rookie question for ya though. Where does all the air go the diaphragm is pushing when it's not being used (regulator or blow gun closed)? Does it have an internal bypass to keep it from destroying itself?
Thanks
@@reelmanmi I've used the compressor for an hour straight with no issues. I installed a pop off valve in mine so, if it was to over pressure it would not crater. I treat this just like any dive and take surface intervals after an hour under water 30 - 45 minutes minimum between dives. I did add one extra feature to this build I installed a bulkhead fitting in the plastic cover and installed a 1/4 in air compressor intake filter.
@@sailingboreas1062 I think I remember you saying you installed a 20psi pop off. Are the pop off valves adjustable or do I buy a 20lb. valve?
I'm thinking of doing something similar to your bulkhead connector in the cockpit so I can just grab the hose, plug it in, throw the switch and get to it. My concern is, if I mount the unit in a lazarette or anchor locker, is it going to get too hot and fail prematurely.
I'm getting all these heads up ideas from your videos and responses to others questions so you know you're providing a worthy benefit, Capt.
I did not see a in line filter
l am in moroco l want toi buy it how Can bay it
Ebay!
Can’t hear you !
Audio is crap