I'm currently replacing my hypertherm controller to a myplasm I'm that impressed! The one issues is programming the panasonic servo drives to talk to the myplasm controller.
I'm having an issue where my STV CNC will cut the loaded file but when it executes the cuts, they aren't centered, like in the file. I make sure the part is placed correctly on the table and that the project position is in the correct setting. Is there a step I may be missing? Thank you for your time.
learned a lot but not what I'm having issues with. I designed something in fusion 360, made it into a DXF file and imported into Myplasm. When I'm using my mini cam, it doesnt show any pierce points or cuts on the perimeter AND it has multiple pierce points for holes. It basically shows it cutting everything twice, except the perimeter which it doesnt show it cutting at all. When I switch my mini cam off, it shows cutting the perimeter but still has 2 pierce points per hole. Can I delete pierce points??
I wish I would have seen this video a couple of years ago. I had no idea these functions were available! Now, I need to make a cheat sheet since I won't remember half of this.
Looks very good, but what if i need to get to g code for save in an pen drive to bring to my machine
I'm currently replacing my hypertherm controller to a myplasm I'm that impressed! The one issues is programming the panasonic servo drives to talk to the myplasm controller.
I don't think that it's good idea replacing Professional system to very simply MyPlasm....
@@myplasmcncsystemen1506 the hypertherm controllers were damaged beyond repair we are take a chance on the myplasm to see if it works.
Hallo, gibt es auch eine Deutsche Bedienungsanleitung?
Besten Dank für Ihre Antwort.
Freundliche Grüsse
Must watch video. I know the software pretty well and still learned a few tricks... Thanks Lukasz
I'm having an issue where my STV CNC will cut the loaded file but when it executes the cuts, they aren't centered, like in the file. I make sure the part is placed correctly on the table and that the project position is in the correct setting. Is there a step I may be missing? Thank you for your time.
it´s amazing all the things it does, hope it is grbl compatible
as always ....amazing
Wow a la verdad que este programa esta a otro nivel. Como puedo cambarlo a pulgadas?
ua-cam.com/video/oiWbpEjASjs/v-deo.html
learned a lot but not what I'm having issues with. I designed something in fusion 360, made it into a DXF file and imported into Myplasm. When I'm using my mini cam, it doesnt show any pierce points or cuts on the perimeter AND it has multiple pierce points for holes. It basically shows it cutting everything twice, except the perimeter which it doesnt show it cutting at all. When I switch my mini cam off, it shows cutting the perimeter but still has 2 pierce points per hole. Can I delete pierce points??
send me example file plese !
@@myplasmcncsystemen1506 Thanks for the response. I just now saw that you responded 3 weeks ago! I have figured it out in the mean time.
I wish I would have seen this video a couple of years ago. I had no idea these functions were available! Now, I need to make a cheat sheet since I won't remember half of this.
Half of it was not available in older version ;)
Yes. I Have to make list of a shortcuts ;)
Hi, can I use this controller for 2 axis (X and Z axsis) wealding machine?
yes.
can this controller work with any low frequency plasma cutter ?
Yes. It's can works with all of plasma source types.
Why to buy?
please i need to downlode softwer posible?
proma-elektronika.com/to-download/
@@myplasmcncsystemen1506 thank you so much, but HUGONG wiill support?