Fretwork 101 | tools & techniques

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 200

  • @thecount9729
    @thecount9729 2 місяці тому +75

    Can't believe this is here on youtube for nothing. I would've spent thirty or forty bucks for a VHS of this not all that many years ago. You guys are the best.

    • @stewmac
      @stewmac  2 місяці тому +18

      YT is an incredible resource! We've always been about sharing knowledge within the luthier community, and YT is the perfect platform for that. Thanks for the positive feedback!

    • @walerybien8193
      @walerybien8193 2 місяці тому +6

      It's great. I wish there could be more of that kind of content. Dan's book is great but video's are much easier to learn from. I wish you guys could release more materials like that, so a beginner could learn all those things and maybe do it for a living.

    • @stewmac
      @stewmac  2 місяці тому +8

      @@walerybien8193 We are working on it...stay tuned!

    • @shmuckyToledo
      @shmuckyToledo 2 місяці тому +1

      Sweeey

    • @Chalmersguitars
      @Chalmersguitars Місяць тому

      Stew Mac is the best!

  • @wkapinos
    @wkapinos 2 місяці тому +17

    Fantastic! The CGI's were a nice touch.

  • @excavatoree
    @excavatoree 2 місяці тому +16

    I've never seen a better presentation of technical material on any subject. It's very difficult to cover a topic thoroughly without becoming confusing or getting bogged down in detail, but this video has done that very well.

    • @stewmac
      @stewmac  2 місяці тому +4

      @excavatoree we really appreciate that sentiment! It's a challenge to figure out what to include and what details are too "in the weeds." It's comments like this that make the task worth it to us!

  • @nikospapadimitriou1637
    @nikospapadimitriou1637 2 місяці тому +19

    A whole book on fretting in a video less than an hour long! Wow!

    • @stewmac
      @stewmac  2 місяці тому +7

      We asked ourselves "what would a crash course on fretwork look like?" and this is what we came up with. Thanks for checking it out! More to come!

  • @xttocx
    @xttocx 2 місяці тому +23

    Hands down one of the best videos within the genre.
    Also probably the best presented content I've seen in a while.

    • @stewmac
      @stewmac  2 місяці тому +6

      Thanks so much! We appreciate that feedback. Good fretwork is so critical, we wanted to get this one right 🎬🎸🤘

  • @KaiDown
    @KaiDown 2 місяці тому +8

    I've watched so many videos on fretwork, this is by far the best and will be the one I recommend to people new to the topic.

    • @stewmac
      @stewmac  2 місяці тому +3

      @KaiDown wow, thank you! We really tried to make something that everyone could learn from - beginners to more advanced. Hopefully it helps folks do some of this work on their own guitars!

  • @JonDeth
    @JonDeth 2 місяці тому +8

    The Stewmac Fret tang Nibbler *is worth every penny!* I've done some single fret replacements here and there and even without binding, I found I needed to trim the tangs shorter.
    Once you trim the tangs, it's a fairly easy process and doing a full neck won't be intimidating, but trimming the tangs the way I did with a Dremel and cut off disc was daunting. I had to curve my wire by hand but my attempts without tang trimming and using a small rubber mallet to press them flush, they were tailing away from the board at both edges.
    *After I trimmed, a small amount of wood glue and various tactics installing them in flush produced professional results even though I was whamming them with a rubber mallet! lol*

  • @paroblynn
    @paroblynn 2 місяці тому +8

    I have been doing this type of work for a long time and I still pick up tips and tricks from stewmac videos.
    I watch the videos and buy the books. Some may say “don’t you know the stuff?” And it’s like yeah, but we don’t want to get a vaccine against education and we may forget a little step and a refresher never hurts.

    • @stewmac
      @stewmac  2 місяці тому +2

      We never stop learning! Thanks for watching!

  • @Riverdeepnwide
    @Riverdeepnwide 2 місяці тому +7

    Gene, great teaching here again. Many thanks to you and Dan.
    It's been about sixty years of maintaining, repairing, modifying, building, etc. for me and Dan's old book and the Guitar Player articles are well used over and over. And now I'm learning more from this electronic video thingy in my hand. Way to go guys! It really has been wonderful.

    • @guitarrepairman
      @guitarrepairman 2 місяці тому +1

      We were all lucky to have Dan’s books starting out, mine are well worn and dog eared that’s for sure! Thank you for the kind words!

  • @algio3041
    @algio3041 2 місяці тому +11

    These videos are the primary reason I’ll be buying from stewmac. I can’t express enough how grateful I am for you all passing on this knowledge for free!

    • @stewmac
      @stewmac  2 місяці тому +3

      Really appreciate that @algio3041 We hope these videos can be of service to the community we love!

  • @calesfer
    @calesfer 2 місяці тому +4

    Having seen hundreds of videos on this topic, this is the best!! Congratulations and thanks for sharing!!

    • @stewmac
      @stewmac  2 місяці тому

      Awesome...thank you for watching!

  • @BeardnScars
    @BeardnScars 2 місяці тому +5

    Man. As a young player I just dealt with these issues as they arose. Now I’m 30, been playing my whole life nearly, and these are such simple fixes. Thank you guys at Stew Mac for making this vid. Seriously, now I could be a mature player and care for my guitar like I need. lol. 😊

    • @stewmac
      @stewmac  2 місяці тому +4

      That's awesome, we believe you really do become a better player when you know how to maintain your own rig! Thanks so much for the comment 🙂

  • @XHuntinatorX
    @XHuntinatorX 2 місяці тому +6

    Really great info from a real pro! This is going to be VERY helpful going forward. Thank you!

    • @stewmac
      @stewmac  2 місяці тому +1

      Great to hear it will be of use to you! Thanks for the feedback.

  • @brentmorgan971
    @brentmorgan971 2 місяці тому +9

    More of these please!

  • @Alex-kd5jt
    @Alex-kd5jt 2 місяці тому +3

    I'm decently comfortable with basic guitar setups but a total noob when it comes to fretwork. I have an Epiphone Sheraton that had a dead note that I realized was from a high fret. After watching many Stew Mac videos, I decided to try fixing it on my own. I know that Stew Mac tools are on the high end in cost but my reasoning was that I would be spending the same amount on having my local shop do the work as I would buying the Fret Kisser and the compact Z-file. They really took the guesswork out with these tool designs and made it so that if you take your time and go little by little, you'll get the job done correctly. The guitar plays great now, and I have these tools for life, ready to take on any other fret leveling that I may need in the future. Stew Mac tools really end up paying for themselves rather quickly.

  • @orryfishburne5326
    @orryfishburne5326 2 місяці тому +3

    Dang!! So much information in a clear and easy to understand way!! Thank you so much!

    • @stewmac
      @stewmac  2 місяці тому

      Glad to hear it, and thanks so much for watching!

  • @KFitzG35competitor
    @KFitzG35competitor 2 місяці тому +1

    This is absolutely amazing. I have an old Korean Squier Stratocaster, it was my first guitar, and my favorite one to pick up. I now know how to address any fret issues it has. Id asked a local shop what it would cost to have the work done by their luthier, and was told "that guitar isn't worth putting that kind of money and time into, just replace it". Well its worth it to me, it plays great, feels great, and that guitar and I have history. Thank you for this video!

    • @stewmac
      @stewmac  2 місяці тому

      Awesome...That's a perfect guitar to learn fret work on and exactly what this method is intended for! Good luck!

  • @dbass1276
    @dbass1276 2 місяці тому +2

    This is the best instructional/informational video I've ever seen. Thank you

    • @stewmac
      @stewmac  2 місяці тому

      Thank you for watching...glad you found it helpful!

  • @timhagood7725
    @timhagood7725 2 місяці тому +2

    Outstanding ! Probably the best tutorial I've watched on UA-cam, and I've watched a ton !!

    • @stewmac
      @stewmac  2 місяці тому +1

      Wow, thanks so much, we love to hear that!

  • @yangmagic0703
    @yangmagic0703 26 днів тому +1

    This is gold. I have been working on guitars for a bit over 5 years and playing for over 18, there are many videos but none is as comprehensive as this. Great work Stewmac!

  • @GerryBlue
    @GerryBlue 2 місяці тому +2

    One of your best, if not the best video, and for one of the hardest topics, thanks!!

    • @stewmac
      @stewmac  2 місяці тому +1

      @GerryBlue thank you for the positive feedback! You're right, it is a complex topic. We tried our best to simplify it and make it approachable to anyone interesting in tackling it on their own.

  • @jamietwells7830
    @jamietwells7830 2 місяці тому +4

    stewmac videos always hit it out the park! Nice one Gene! 👌🏻

    • @stewmac
      @stewmac  2 місяці тому +1

      Thanks a bunch 👍

  • @StealthParrot
    @StealthParrot 2 місяці тому +1

    Absolutely fantastic video. I have done a couple of my own fret level, crown and polish jobs but I'm still a learning newbie building my confidence. This video is reference quality! Thanks.

    • @stewmac
      @stewmac  2 місяці тому

      This is what we love to hear...Thanks for watching!

  • @randylearguitar
    @randylearguitar 2 місяці тому +2

    Truly the best fret video I’ve ever seen! Thank you!

    • @stewmac
      @stewmac  2 місяці тому

      Wow, thanks! We appreciate that.

  • @lancelucifer4851
    @lancelucifer4851 Місяць тому

    Thanks. You see it done all time on all the guitar building vids, but this my man,shows you how it really done.

  • @OgamiItto70
    @OgamiItto70 2 місяці тому +3

    What a righteous video! Great information well-presented. Nice!

    • @stewmac
      @stewmac  2 місяці тому

      Thanks for the feedback! Appreciate that!

  • @dmanguitar
    @dmanguitar 2 місяці тому +6

    53:25 Shoutout to the video editor for this 25 seconds of editing gold! lol 👍Nicely done!

    • @stewmac
      @stewmac  2 місяці тому +1

      Thanks for noticing! 😎🤘🎬

  • @rodolfoamaralguitar
    @rodolfoamaralguitar 2 місяці тому +3

    Thank you! Supperb video. Stewmac Team is the best!

    • @stewmac
      @stewmac  2 місяці тому

      Thank you so much for the positive comment! 🤗

  • @SuriSanJose
    @SuriSanJose 2 місяці тому +2

    Thank you Gene for this incredible video. I love your work and I have learned a lot from all your videos.
    You guys are the best!

    • @stewmac
      @stewmac  2 місяці тому +1

      @SuriSanJose thanks so much! We're so glad they've been helpful to you.

  • @yakfishin4912
    @yakfishin4912 2 місяці тому +7

    Finally. Thanks StewMac

  • @garethtravis1786
    @garethtravis1786 2 місяці тому +2

    THANK you Gene what a brilliant video ! So well scripted and shot - info was brilliantly organized ❤🔟👌🏻👍👍

    • @stewmac
      @stewmac  2 місяці тому

      Awesome, thanks so much for watching! We appreciate the comment!

  • @shawnp1963
    @shawnp1963 2 місяці тому +1

    This is without a doubt the BEST info I’ve seen on these topics! Thank you!🔥

    • @stewmac
      @stewmac  2 місяці тому

      Thank you so much!

  • @CharcoaI
    @CharcoaI 2 місяці тому +4

    Amazing video!
    StewMac should do a certification program; would love to know if a potential Luthier is trained in this stuff - especially when outside of the USA!
    I've had two bad experiences with different luthiers in Australia; which has led me to taking on much of this work myself.

  • @d0leo
    @d0leo 2 місяці тому +2

    Excellent video, guys! Really well made production, excellent explanations and helpful demonstrations. I'll be referring to this in future, too!

    • @stewmac
      @stewmac  2 місяці тому

      Thanks so much, we're glad you enjoyed it! Thanks for the feedback.

  • @BrettBolzenthal
    @BrettBolzenthal 2 місяці тому +1

    I agree this is the best video still on the internet for all the fret and neck coverage. I'm saving this to my playlist for future work.

    • @stewmac
      @stewmac  Місяць тому

      Thank You!!!

  • @AntonioZaccariaGuitar
    @AntonioZaccariaGuitar 2 місяці тому +3

    This is pure gold!

  • @qcc5
    @qcc5 2 місяці тому +1

    Incredible video. Very detailed, and close up. Really showed off your great skill. Thanks.

    • @stewmac
      @stewmac  2 місяці тому

      Thank you very much!

  • @LucaDigioia83
    @LucaDigioia83 2 місяці тому +2

    watched all of it, beautiful work

    • @stewmac
      @stewmac  2 місяці тому

      Thank you, glad it held your attention! 🤗

  • @ThomasDenis-p3t
    @ThomasDenis-p3t 2 місяці тому +2

    Greatest video. Great detail content and close-ups are so helpful! Thanks a thousand

    • @stewmac
      @stewmac  2 місяці тому

      So glad it was helpful to ya - cheers!

  • @mdazizurrahman7437
    @mdazizurrahman7437 2 місяці тому +1

    Super awesome demonstration Eugene! Just loved it, you just put together 30+ video content for learning fretwork for newbies like me! Thank you!

    • @guitarrepairman
      @guitarrepairman 2 місяці тому

      Thank you!

    • @stewmac
      @stewmac  2 місяці тому +1

      Thanks a bunch, glad you enjoyed it!

  • @danrao3707
    @danrao3707 4 дні тому

    Well this was extremely educational. Thank you very much StewMac.

  • @robclute
    @robclute Місяць тому

    Subscribed!! I’ve watched this at least 3 times start to finish and ordered a bunch of these tools from the website. It’s amazing to have such a great resource to learn from. Thank you Stewmac.

  • @EricMerrow
    @EricMerrow 2 місяці тому +2

    Love this video!

    • @stewmac
      @stewmac  2 місяці тому

      @EricMerrow thanks a bunch!

  • @timmacmoneysac1144
    @timmacmoneysac1144 2 місяці тому +3

    awesome video! thanks for sharing

  • @johnandrewbellner
    @johnandrewbellner 2 місяці тому +2

    Wow! What a great video.

  • @tonyhaynes6074
    @tonyhaynes6074 28 днів тому

    Excellent video and answered all of my questions on fretwork!

  • @anyday82
    @anyday82 2 місяці тому +2

    This guy's the fret master

  • @crmsx
    @crmsx 2 місяці тому +2

    great video, really appreciate it

  • @sandrosbackyard343
    @sandrosbackyard343 2 місяці тому +2

    awesome vid, thank you for all the tips and tricks!

    • @stewmac
      @stewmac  2 місяці тому

      Thank you for watching!

  • @robphillips8351
    @robphillips8351 2 місяці тому +2

    Very thorough 👍👍

    • @stewmac
      @stewmac  2 місяці тому +1

      Thank you for watching!

  • @cecilmusick8629
    @cecilmusick8629 2 місяці тому +4

    Great video!

  • @dhcoloniemain9358
    @dhcoloniemain9358 2 місяці тому

    That's a lot of tools shown. But, to your credit you show why they are needed and how to use them (and frankly, anyone attempting to do guitar repair should probably have all the necessary tools anyway or else take the job to a pro). Thank you!

  • @Densurka
    @Densurka 2 місяці тому +3

    Wow! Thank you! It`s very useful!

    • @stewmac
      @stewmac  2 місяці тому

      Awesome, glad it was helpful!

  • @guitartec
    @guitartec 2 місяці тому

    These videos always give me more business. Thanks StewMac!

  • @AudioAtmos
    @AudioAtmos 2 місяці тому

    Beautiful work and a great and essential video. Thank you StewMac & Gene for sharing.

    • @stewmac
      @stewmac  2 місяці тому +1

      Thank you!!!

  • @doctoribanez
    @doctoribanez 2 місяці тому +3

    Great video

  • @luislanga
    @luislanga 2 місяці тому +2

    That's some sick animation.

    • @stewmac
      @stewmac  2 місяці тому +3

      Thanks! It definitely helps show the specifics!

  • @scirasco1
    @scirasco1 2 місяці тому +1

    Great video great educator

  • @Krullmatic
    @Krullmatic 2 місяці тому +1

    Great animation!

  • @edwardedwards6804
    @edwardedwards6804 2 місяці тому +1

    Great video. Your fret puller will draw heat away from the hot fret. Heating the puller jaws for just a few seconds with a propane/MAPP/MAPP-PRP torch will help keep the puller from cooling the fret.

  • @paulcollinsmusic
    @paulcollinsmusic Місяць тому

    This is a great video. Thanks for the info and advice. Really useful.

  • @2bcmusic
    @2bcmusic 2 місяці тому +1

    Brilliant! Thanks

  • @Argentuza
    @Argentuza Місяць тому

    37:56 Wow, that's a cool tip, really clever, never thought of that, a smart way to fix your guitar with only two clamps! thanks!

  • @masonianbund
    @masonianbund 2 місяці тому

    Perfect timing, as I am diving deeper into “level 2” fretwork with the goal to do a “level 3” partial refret on my Martin later this year. (Thankfully I have a cheap broken guitar to practice on first!)

    • @stewmac
      @stewmac  2 місяці тому

      Awesome...good luck with it!

  • @andreykarayvansky9549
    @andreykarayvansky9549 2 місяці тому +2

    Awesome video! Thank you so much!
    My only question is how to properly widen the frets. This was my biggest issue during my first refret. My Gibson had very narrow fret slots compared to the StewMac frets (0.6mm wide). I used a Japanese saw, but this was not an ideal tool. I bought 0.6 mm dremel bits and want to try them out.

    • @stewmac
      @stewmac  2 місяці тому +2

      Great question! It's usually preferable to reduce the size of the tang and preserve the slot. We have the Fret Barber that is meant to "shave" down the sides of the tang for a better fit. There are also "refret saws" meant to work between binding to open up the slot width if you'd prefer. Links below. Thanks!
      www.stewmac.com/luthier-tools-and-supplies/tools-by-job/tools-for-fretting/pullers-nippers-sizing/fret-barber/
      www.stewmac.com/luthier-tools-and-supplies/types-of-tools/saws/refret-saw/

  • @DanGower
    @DanGower 2 місяці тому

    Wonderful content, thankyou for this!🎸🌟

    • @stewmac
      @stewmac  2 місяці тому

      Thank you for watching!

  • @Obscurity202
    @Obscurity202 2 місяці тому +3

    Wow fancy graphics y'all!

    • @stewmac
      @stewmac  2 місяці тому

      ✨😎🎸

  • @MrDanbecker
    @MrDanbecker 2 місяці тому +4

    Great job .. Thanks .. 🙂👍🥂.

  • @AudioEast
    @AudioEast 2 місяці тому +3

    that was damn fantastic!

  • @diegoicosta
    @diegoicosta 2 місяці тому

    A Nobel Prize for this man, please.

    • @stewmac
      @stewmac  2 місяці тому

      😅There should be a Nobel Prize for lutherie! Thanks for watching!

  • @hotel_yugoslavia
    @hotel_yugoslavia 2 місяці тому

    Fantastic video, thanks a lot!

    • @stewmac
      @stewmac  2 місяці тому

      Thank You!!!

  • @callanhulett503
    @callanhulett503 2 місяці тому +1

    Fantastic video. Any plans to do a video on refretting an acoustic or classical? I'd love to see the approach when dealing with the fretboard extension to the soundhole.

    • @stewmac
      @stewmac  2 місяці тому

      Yes! We have more fretting videos in the works.

  • @paulcollinsmusic
    @paulcollinsmusic Місяць тому

    This is great! Thanks!

  • @lukehodgson5222
    @lukehodgson5222 2 місяці тому +1

    Great stuff! I've done level 1 and 2, just need to dive in and do a re-fret sometime! My Yamaha may not agree haha

    • @stewmac
      @stewmac  2 місяці тому

      Killer! You can totally do it, especially if you've nailed levels 1 & 2. Your Yamaha will thank you! 😎

  • @njninaman
    @njninaman 2 місяці тому +1

    love his video. as good as Dan's

  • @Sunshineguitars1
    @Sunshineguitars1 28 днів тому

    Thanks, Gene. This is an absolute wealth of information. Quick question: why not just use a radius block and sandpaper to do your fret level or fingerboard level? Wouldn’t that be quicker than flat leveling first? Thanks!

  • @ThisLoveIsSweet
    @ThisLoveIsSweet 2 місяці тому +3

    Gene is the next Dan Erlewine 👍

    • @stewmac
      @stewmac  2 місяці тому +2

      Dan was an influential mentor of Gene's (and still is!) 😎

  • @guitarz
    @guitarz 2 місяці тому +2

    Excellent again. the anamation on this one is next level. Your channel is a life saver

    • @stewmac
      @stewmac  2 місяці тому +1

      Thank you! The concepts of fretwork are often so small and subtle, we thought some animation might help a bunch.

  • @LagloriadeJuan
    @LagloriadeJuan Місяць тому

    Thank you!!!!

  • @greedygringoprospecting6941
    @greedygringoprospecting6941 2 місяці тому +2

    pretty cool. !!!

  • @wolfgangwolfdogplaysguitar701
    @wolfgangwolfdogplaysguitar701 Місяць тому +1

    I've been watching a lot of guitar building and modifying videos ever since I started playing electric guitar at age 10 and now I'm 18 and I know that building guitars is fun but is also a lot of hard work especially when it comes to the fretwork on the fretboard so I watch so many fretwork videos and most of the fretwork videos I watch are very long and I prefer to watch videos that aren't so long so I'd recommend this video for a fretwork tutorial but tbh I watch all videos on how to do fretwork but definitely this video is my number one video on how to do fretwork, also do you have a video on how to install frets on a bound fretboard?

    • @stewmac
      @stewmac  Місяць тому

      We sure do! Link below...Thanks!
      ua-cam.com/video/BYTVAYgN1RE/v-deo.html

  • @Fuzzheimer
    @Fuzzheimer 2 місяці тому

    Well done

    • @stewmac
      @stewmac  2 місяці тому +1

      Thank you!

  • @savagehenry3825
    @savagehenry3825 2 місяці тому

    Excellent video, though I would've loved the topic of fall away to be included.

    • @stewmac
      @stewmac  2 місяці тому

      We'll cover that subject in more detailed future videos. Thanks!

  • @ieblack37
    @ieblack37 2 місяці тому +2

    I never knew that you could use micro mesh. Good thing too because I thought mine were needing replacement

    • @stewmac
      @stewmac  2 місяці тому

      Yep! Keeping them clean will extend the life drastically. Thanks for watching!

  • @marcohermans3207
    @marcohermans3207 2 місяці тому

    This is gold! So well explained. Thank you sir! I've a question. What's the lowest fret height you can go with a fret level before considering a refret. I've a Epiphone dot that has a fret height of 1mm and 2,7mm width and they have some minor dents in them. Maybe after the fretlevel I've 0,8mm height left and I'm not sure if that is enough. What would you advice me? Thanks

    • @stewmac
      @stewmac  Місяць тому

      Thank you! It's not so much about the height of the fret as it is the amount you have to remove from the fret relative to the width. It becomes difficult and tedious to reshape at a certain point. We consider the 20% we discussed in the video to be a reasonable rule of thumb. You can go beyond that if you like low frets and you don't mind the extra work crowning them. At the end of the day, if it works for you it isn't a problem!

  • @zyxwvut4740
    @zyxwvut4740 2 місяці тому +1

    51:20 "We're going to be doing a deep dive into all things fretwork…"
    Yikes! I thought that's what this was! 🎸

    • @stewmac
      @stewmac  2 місяці тому +1

      This is just "Fretwork 101"! 😎 We'll be jumping into each topic on a deeper level in the near future.

  • @DJBuglip
    @DJBuglip 2 місяці тому +2

    Oh, this is good news.

  • @LuneCheung
    @LuneCheung 2 місяці тому

    It's amazing and super thorough but I'm curious how to handle a compound radius fretboard refret. Since the radius keeps changing, it looks like we can't use the radius block.

    • @stewmac
      @stewmac  2 місяці тому +1

      This is Fretwork 101, leveling a compound radius is Fretwork 7001! Since a compound radius isn't the same measurement in any 2 spots on the board, you can't use radius blocks. It's difficult and I would encourage you to get very good at a uniform radius before tackling something like this.
      If you're interested in understanding the geometry better, we have an excellent article written by Don MacRostie on our website:
      www.stewmac.com/video-and-ideas/online-resources/neck-building-and-repair-and-setup/compound-radius-explained/
      Thanks for watching!

  • @KasperJuul87
    @KasperJuul87 17 днів тому

    Great Video. But please. What model is that Gibson guitar at 16:06 ? 'Cause that is a beauty!

  • @J.C...
    @J.C... Місяць тому

    I used to waste time hand polishing frets like that. Going through 8 different grits across 22 frets. 176 frets polished. By hand. Won't do it again.
    Today, I used a 4 inch buffing/polishing wheel on my cordless drill along with blue stick polish from Dialux. I tested it and I can polish with that directly after crowning with a Z-file. Nothing else after crowning.
    it'll take out all the scratches and polish the frets to a mirror finish with maybe 5 mins of polishing with the drill, polishing wheel, and light blue Dialux polish. I'll take that ALL DAY over an hour or more by hand.

  • @terrywebb5380
    @terrywebb5380 2 місяці тому +2

    Have I missed something? I don’t understand why you would go to all the bother of levelling frets under string tension 25.17 and then to undo this fine tune by using a radius beam 28.10 with a straight neck with strings off reversing the the good effect of levelling frets with string tension.

    • @stewmac
      @stewmac  2 місяці тому +1

      That's a fair question! At some point with an approach like this, you have to accept a certain potential for insignificant error. There are other places in the process we make that choice too. Here that would be choosing to stop after the leveling and keep a radius that may vary or truing that radius and potentially adding a little error in the levelness. We've already straightened the board, so if that looks the same with and without string tension, the chance of introducing significant error with the radius block is small. We are sanding with high grit paper and removing only a few thousandths of an inch at that point. This is a basic approach, there are other more accurate ways of doing this work but it's a bigger investment in time and tools, but in many cases the outcome isn't noticeably different. Thanks!

  • @walerybien8193
    @walerybien8193 2 місяці тому +2

    Why is it better to sand of the board or the frets with sanding beam first and radius block afterwards, instead of doing it only with the radius block?

    • @stewmac
      @stewmac  2 місяці тому +1

      That's a great question! Sometimes you can, and we do finish up the leveling process here with the radius block as we true up the curve. Essentially, if the error you need to correct is uniform across the board, then a radius block can work great. But much like the concept we cover for multiple length edges, you can't easily focus on singular high spots with a radius block that spans the whole width of the neck, you hit everything for the entire width and length of the radius block and risk removing good material. In most cases, it's better to get the board uniform with a narrower leveler, then blend in with a radius block once you are close. Thanks for watching!

  • @michaelrobinson9255
    @michaelrobinson9255 2 місяці тому

    what do you do for the gaps under the ends of the frets on the fretboard. Glue and sawdust? I have maybe 0.2 millimetre gap under the first 3 frets on the edge of the fretboard.

  • @AlanElias350
    @AlanElias350 2 місяці тому +1

    Is this guy the new Dan E. ?

  • @Stratocus
    @Stratocus 2 місяці тому +1

    Makes me wonder what to do with one of my guitars. It has 6100 size frets which are not to my liking as they're too tall. Would a re-fret be easier than leveling and crowning? The fret wire has minimal wear so I hate to toss them. Also, they're on a one piece maple neck.

    • @guitarrepairman
      @guitarrepairman 2 місяці тому

      It’s difficult to say for sure without evaluating the specific guitar, but in most all cases I would refret rather than try to shape a jumbo fret into a smaller one.

    • @Stratocus
      @Stratocus 2 місяці тому

      @@guitarrepairman that's what I'm leaning toward although I already have all the tools for leveling and crowning. I'm always reluctant to buy tools that I might only use once.

  • @philmckrackensr2159
    @philmckrackensr2159 6 днів тому

    Be careful leveling your frets under string tension unless you really know what you’re doing. I sanded all my frets off doing this, but I got some great tools!

  • @XHuntinatorX
    @XHuntinatorX 2 місяці тому

    Question: Why did the fingerboard need leveling after the frets were removed? It seems that relief was added with the truss rod adjustment and then sanded level again. Wouldn’t string tension reintroduce relief back into the neck thus negating the previous work? Or was the leveling done because the truss rod adjustment by itself couldn’t get the neck uniformly straight along it’s entire length?

    • @stewmac
      @stewmac  2 місяці тому +2

      Yes...often the truss rod alone will not straighten a neck perfectly. We didn't exactly add relief, we were just avoiding a back-bow. If you can't get the neck straight it needs planed (in normal cases) so you have to choose to level out a little relief, a little back bow, or sometimes a combination of both. We find the straightest point we can get with the rod, then we level it straight. Hope that answers your question...Thanks!

    • @XHuntinatorX
      @XHuntinatorX 2 місяці тому +1

      @@stewmac Ok, that makes sense now. Just asked because I haven’t seen anyone else “yet” that took that extra step when doing a re-fret. There is a ton of good info in this video! I have watched it several times and am still finding new things that I haven’t seen before. Thanks so much for taking the time to give me a detailed answer. This is how you attract and keep loyal customers to your company.

    • @stewmac
      @stewmac  2 місяці тому

      @@XHuntinatorX You're welcome!

  • @3cardmonty602
    @3cardmonty602 2 місяці тому +1

    I always take strings off the guitar when I level frets. It just makes life easier.

    • @stewmac
      @stewmac  2 місяці тому

      Still a valid technique...many ways to get the job done right! Thanks for watching!

  • @rs3950
    @rs3950 2 місяці тому +1

    Is it possible to refret without leveling the new frets?

    • @stewmac
      @stewmac  2 місяці тому +1

      It is possible, and below a certain price point most guitars are probably done this way because leveling and dressing is time consuming by hand. On a refret, even the most accurately done work still usually benefits from some leveling and dressing. It's rarely zero, but the idea is to make that as little as possible. Thanks!

  • @XHuntinatorX
    @XHuntinatorX 2 місяці тому

    What brands of paste wax can be used to protect the fingerboard when glueing frets? I saw SC Johnson being used in this video but it is $159.00 for a 1lb. container on Amazon!!!

    • @stewmac
      @stewmac  2 місяці тому +2

      Great question! SC Johnson stopped making that product, so people are asking ridiculous prices for them online. Minwax paste works great, also beeswax or carnuba wax, we've even used Vaseline in a pinch. Hope that helps!

    • @XHuntinatorX
      @XHuntinatorX 2 місяці тому

      @@stewmac Excellent! Ordered my fret pulling kit today so frets will be coming out this weekend! Thanks so much for responding.

    • @stewmac
      @stewmac  2 місяці тому +1

      @@XHuntinatorX Killer! Best of luck - hopefully they come out without too much of a fight and all goes well!