Please don’t ask me about it, I feel bad. Was supposed to do it last service around 10 months ago but somehow it got forgotten. So I never did change it, I had first service done bye dealer so guess it would be around 2 years now. It should be replaced every service 1 year!
Yess literally same for me! Did all other important service things but somehow I forgot about this one! This was overdue 1 year almost. Hopefully this video remind other to change it in time!
Tjenare, kan det börja blåsa någon annanstans till och från om fjädern är borta? Tex om man känner att ACn lägger "av" för att sen starta men man känner att det blåser kallt ändå men man känner inget i utblåsen. Can the fan outlets stop blowing if the airfilter springs are gone but it still feels like it is blowing from somewhere else for example when you use the AC?
Pro tip- don’t pull down the carpet at the start like I did. The Torx bit fell off the screwdriver and down under the floor pad. Never found it. Luckily I had another. Also, pay someone to do this if you have bad knees or back as a lot of contortions are needed to get the job done. I couldn’t get the Mann filter to lock, seemed a bit too big and had to put the OEM back in. PITA job.
it’s quite difficult to slide plastic lock in place, so better to lube the edge before and right metal clamp really annoying, that’s why I think previous mechanic just never placed them back. PS my car previously been maintained in dealership but floor carpet left edge been folded and that’s why it’s haven’t been in place, now I fixed that
Question. 3 zone climatetronic. Driver side coming sometime hot air out and in the same time passenger side cold as I set up. What can be the problem ?
I tried to install this filter in my W204 C250 AMG CGI. But it was not fitting well. Too high and couldn’t close the slide. I have to return it altough it should fit according to VIN number.
My W204 is also missing those springs, actually had no idea that it had springs there! 😂 Gonna check with MB Trucks if they have them in stock here in Brazil - the springs are also used in the MB Vito van - because MB Cars would charge me like 100 dollars for each clip haha
Seems really common the mechanics don’t care about these clips, probably because is take time to put them back 😅 Hopefully you got them that way 100$ each seems bit expensive haha.
Hi, I am amazed at the accessibility of this filter, why try so hard. I had a 406 and 607 Peugeot, I could change the filter without tools, in 3 minutes. a bad point for Mercedes (I now have an S212), unless that is so that the owners come back to the dealership. Best Regards Eric
I guess it was about 2 years ago when I did my first service at the stealer! Somehow I forgot this last time doing my first service at home, and now I feel bit ashamed about it. I probably not should added the dust part in the video 😂 Only drove few kilometers from the garage at home but no smell so far I let you know when I have driving for some days 🤟
FYI: at the begining when you disconnect the TEMP PROBE to remove plastic cover... this creates a DTC FAULT in the HVAC Module !!! Connect your ODBII scanner to clear that fault (Faults introduce network latencies that add up) 👍
Going to check that did not see any mention on the mb documents I may have missed that. So you mean should not take out the actual temperature! Only disconnect the actual cable clip when remove it?
No disconnect is good because it creates a DTC as soon as TempSensor is disconnected (with the ignition being "off" the HVAC module should be sleeping but no, HVAC module sees its missing sensor = DTC Fault!). Use a good scanner to clear that fault. No disconnect, no extra problem 🤗
Checked the mb documents again and the right procedure is to disconnect the cable for temperature. Run fault search with Xentry no fault codes at all. Checked all values in the module and they are all good! So is should not be any problem.
when was the last time you changed an old filter?
Please don’t ask me about it, I feel bad. Was supposed to do it last service around 10 months ago but somehow it got forgotten.
So I never did change it, I had first service done bye dealer so guess it would be around 2 years now. It should be replaced every service 1 year!
Blessed be those who put part numbers for everything in their videos, for they will be rewarded with subs.
Thanks it great to hear because take me lot more time when edit 🙏
I changed the Air Intake and Cabin filter this morning thanks to your videos mate. I appreciate youre work so much!❤
Great video,. On UK car (right hand drive) is pollen filter located on drivers, or passenger side?
These right hand models make me so confused even think about it haha. I actually don’t know but I would guess passenger side.
@@MB212 thanks for the reply!
Maybe I should have said the correct side 😃😃
Your vids are great and very comprehensive (love the correct part numbers)
Good job mate. That cabin filter was filthy. So good to see you changed it. 😊
It really was needed 🙈
Most people are either forget it or don’t even know it’s in there
Yess literally same for me! Did all other important service things but somehow I forgot about this one! This was overdue 1 year almost. Hopefully this video remind other to change it in time!
Great video. I pulled the original MB plastic slide lock off because the MANN slider was too tight.
I had the same issue. Drove me nuts!
Thanks for the tip!! Was driving me nuts so I came to the comments and you delivered 🫡
Excellent video as always 👍
I changed my indicators to the dynamic ones today.
Thanks bro! How did the install go for you?
Straight forward about 15 or so mins.
I ordered the hurungo ones like yourself.
Tjenare, kan det börja blåsa någon annanstans till och från om fjädern är borta? Tex om man känner att ACn lägger "av" för att sen starta men man känner att det blåser kallt ändå men man känner inget i utblåsen.
Can the fan outlets stop blowing if the airfilter springs are gone but it still feels like it is blowing from somewhere else for example when you use the AC?
Pro tip- don’t pull down the carpet at the start like I did. The Torx bit fell off the screwdriver and down under the floor pad. Never found it. Luckily I had another. Also, pay someone to do this if you have bad knees or back as a lot of contortions are needed to get the job done. I couldn’t get the Mann filter to lock, seemed a bit too big and had to put the OEM back in. PITA job.
it’s quite difficult to slide plastic lock in place, so better to lube the edge before and right metal clamp really annoying, that’s why I think previous mechanic just never placed them back. PS my car previously been maintained in dealership but floor carpet left edge been folded and that’s why it’s haven’t been in place, now I fixed that
Good tip, yess seems is quite common they go missing due to how hard they could be to put back 😅
Question. 3 zone climatetronic. Driver side coming sometime hot air out and in the same time passenger side cold as I set up. What can be the problem ?
What about cls 350 218..same stepes?
I tried to install this filter in my W204 C250 AMG CGI. But it was not fitting well. Too high and couldn’t close the slide. I have to return it altough it should fit according to VIN number.
Nice video as always.where can I find parts catalogue code diagramme?
ありがとう！大変参考になりました👍
where are you in Siberia?
👋 Hi! My metal clips are missing too, do you think it's a big deal, or leave it alone? 🤔
Actually I forgot to order the missing clips. No worry’s as long it sitting there.
Why my ac get ice and blocking the air flow to the cabin inside ?
I love your work and video's +100K
I did this an then the temperature sensor code 911315 - " right vent temperature sensor faulty
My W204 is also missing those springs, actually had no idea that it had springs there! 😂 Gonna check with MB Trucks if they have them in stock here in Brazil - the springs are also used in the MB Vito van - because MB Cars would charge me like 100 dollars for each clip haha
Seems really common the mechanics don’t care about these clips, probably because is take time to put them back 😅 Hopefully you got them that way 100$ each seems bit expensive haha.
where the hell did the filter collected dust when is snow out there everywhere, everytime ? :):)
Omg thanks I found your channel 👍👍👍
thank you!
Hi, I am amazed at the accessibility of this filter, why try so hard.
I had a 406 and 607 Peugeot, I could change the filter without tools, in 3 minutes.
a bad point for Mercedes (I now have an S212), unless that is so that the owners come back to the dealership.
Best Regards
Eric
Agree! Is not a good design for the filter.
Damn how old is that filter 😆. Did you notice any unpleasant smell from the new Mann filter? Both my MB and Mann filters had a bad smell even new.
I guess it was about 2 years ago when I did my first service at the stealer! Somehow I forgot this last time doing my first service at home, and now I feel bit ashamed about it. I probably not should added the dust part in the video 😂
Only drove few kilometers from the garage at home but no smell so far I let you know when I have driving for some days 🤟
@@MB212 It's best to be honest - good to see what an old, dirty filter looks like.
Good job bro✌
Thanks 🤙
FYI: at the begining when you disconnect the TEMP PROBE to remove plastic cover...
this creates a DTC FAULT in the HVAC Module !!!
Connect your ODBII scanner to clear that fault (Faults introduce network latencies that add up)
👍
Going to check that did not see any mention on the mb documents I may have missed that.
So you mean should not take out the actual temperature! Only disconnect the actual cable clip when remove it?
No disconnect is good because it creates a DTC as soon as TempSensor is disconnected
(with the ignition being "off" the HVAC module should be sleeping but no, HVAC module sees its missing sensor = DTC Fault!).
Use a good scanner to clear that fault.
No disconnect, no extra problem
🤗
Checked the mb documents again and the right procedure is to disconnect the cable for temperature.
Run fault search with Xentry no fault codes at all. Checked all values in the module and they are all good! So is should not be any problem.
Top Video 👌🏻
Thanks bro 🔥🔥🔥
Excellent video, thank you!
Brilliant, thank you 👌
Thank
Нужно было продуть фильтр сжатым воздухом. И ещё лет на пять хватило бы.
Le scritte durano troppo poco e scarsamemte contrastate
Sapete sicuro fare i meccanici. Ma i video..