The Devil Fruit is from the show “One Piece” Luffy is the main character that ate the Gum Gum (Rubber) fruit. You got the Flame Flame fruit that Luffy’s “brother” (Ace) ate.
If you're going to buy a 3D printer I strongly recommend you look only at the Creality CR10S. It prints 300mm (W) x 300mm (D) x 400mm (Tall) so nearly everything you want to print can be. There are thermocouple temperature sensors so you can print above 260°C (you can't print in Nylon or Polycarbonate unless you are able to cross well above that temperature range) without the thermistor temperature sensor going bad. There is an all metal hot end (Micro Swiss is the maker). There is an AC powered hotbed heater (3D printers use DC hotbeds and they struggle to reach 100°C and near none can go any higher) which can cross well over 400°C while using less than 1/2 the electricity a DC heater requires (Keenovo is the AC bed heater maker). There are many custom extruders available for it, so if you want to print in ultra flexible materials, you can with them. There are a ton of parts available for it. I own many 3D printers and my CR10S is my primary. Why? Look at printer comparisons here. You will quickly find that for the money none print as cleanly and evenly as the Creality CR10S. I strongly suggest you buy a Capricorn PTFE tube at the same time and never bother using the original included PTFE tube (the original is too large inside and the plastic filament can move in directions other than towards your hot end as a result, resulting in insufficient plastic filament moving to your hotbed [ie Print Surface] but the Capricorn tubes are narrow enough to prevent that flopping/bowing/bending and can handle far higher temperatures so it won't burn and release the horrible gasses into the air you breathe). Buy a Creality CR10S and you'll be happy. Settle for a Creality Ender 3 and you'll hate that you are forced to buy an additional printer to print in higher temperature filaments like ABS, PETG, TPE, TPU, TPC, Nylon, PC (Polycarbonate), PMMA and nearly all others plastic filaments. The Creality CR10S is the absolute safest buy (and there's also even larger versions such as the CR10S4 which prints 400mm x 400mm x 400mm and CR10S5 which can print 500mm x 500mm x 500mm) thanks to TH3D Studio (www.th3dstudio.com/) which has every part you could want to improve it including a dual hot end kit so that you can print in 2 colors at exactly the same time. I also recommend that you change out the extruder drive head (the part which grabs and moves the filament along) because the vast majority are too smooth and/or rounded to properly move the filament along. I went with these: Wangdd22 3D Printer Accessories 4pcs/lot 38 Tooth Mold Steel Linear Extruder Filament Drive Gear for Planetary Gear Extruder www.amazon.com/dp/B06ZYG5Z47/ref=cm_sw_r_cp_apa_i_sYwbEbZ7KMTQ4
Sean, you got the flame flame fruit. In One Piece, there is this concept called devil fruits and if you eat it you get powers. When you eat it you become unable to swim in water. You got the flame flame fruit which was possessed by the main character, Luffy’s, brother. The powers of the flame flame fruit make you a man made out of fire and you have fire based attacks. There you go papi. ItsYeWeeb signing out.😂
It's freakin funny that whenever I see ads of Wish pop up...they show that the orders come with a wish box but yet all the orders that Sean has gotten been in freakin plastic bags 🤣
i wonder when he is going to figure out that the 1 dollar items are mostly limited quantity deals, meaning only the first person who gets their order processed gets the item
Omg are you really that dumb??? If they were paying him he would say it because paid videos get more views and that would obviously get Wish more publicity. Do you have no clue at all how advertising and sponsorships work????
6:47 hell yeah one piece stuff the fruit you got is called the Mera Mera no Mi (flame flame fruit) (for those who don’t know the devil fruit is from one piece it’s the fruit that some people eat and they em get abilities but loose their ability to swim and will drown if they try simplistic explanation)
Do a home theater setup using only wish. The top rated projector, screen, sound system, dvd player, and you gotta have furniture. To add to the challenge see if you can even buy a movie.
It's a Devil Fruit called Fire Fire, Which obviously gives you fire powers :). Ace who had this fruit is one of the most popular characters in one piece.
Too funny...I was debating buying the One Piece Anime devil's fruit, but now I'm so gonna add it to the collection... PS...that robot vac...those were the mop attachments 🤫
You should do one with ABLOE. First, generate random words, put that into search bar. Generate random number to select which option in the autocomplete. Generate another random number to select row. Generate another random number to select which item on that row. Then finally generate a random number to see who in ABLOE has to buy that item. And if you wanna troll, generate a random number one more time to see who that item goes to. May be a good Christmas gift idea.
The Wind Turbine video is coming soon guys, just going to take a few more weeks for everything to come in and get set up! Thanks for being patient
ItsYeBoi do wish shoes
Do wish electronics and vehicles
ItsYeBoi u r sexy
Not gay
ItsYeBoi hi
The “devil egg” is a devil fruit and if you don’t want it, send it my way please
Lord_Pixil lmfao
Wait,are you sure?Are you talking about becoming the new Ace?
Angry One Piece fans.... And im one of them 😅
The Devil Fruit is from the show “One Piece” Luffy is the main character that ate the Gum Gum (Rubber) fruit. You got the Flame Flame fruit that Luffy’s “brother” (Ace) ate.
Oddlyish i wish they where real...
zeni fejzuli haha, forreal that would be lit
@11:42
@@Multicocco123 @11:42
Damn ok someone knows there anime
Sean : “we are going to do one more “
Word generator: sausage
Sean : *disappointed*”never mind”
Record your next wish video using only a cheap camera from wish
loool that would be painful
ItsYeBoi lol I support all of the cringe, and who knows people might actually like they nasty quality😂
Man I love all your wish videos, keep up the great work!!!
Thanks g!
Me: Why am I so tired ?
Also me: Watch wish vids at 2 am
If you're going to buy a 3D printer I strongly recommend you look only at the Creality CR10S. It prints 300mm (W) x 300mm (D) x 400mm (Tall) so nearly everything you want to print can be. There are thermocouple temperature sensors so you can print above 260°C (you can't print in Nylon or Polycarbonate unless you are able to cross well above that temperature range) without the thermistor temperature sensor going bad. There is an all metal hot end (Micro Swiss is the maker). There is an AC powered hotbed heater (3D printers use DC hotbeds and they struggle to reach 100°C and near none can go any higher) which can cross well over 400°C while using less than 1/2 the electricity a DC heater requires (Keenovo is the AC bed heater maker). There are many custom extruders available for it, so if you want to print in ultra flexible materials, you can with them. There are a ton of parts available for it. I own many 3D printers and my CR10S is my primary. Why? Look at printer comparisons here. You will quickly find that for the money none print as cleanly and evenly as the Creality CR10S. I strongly suggest you buy a Capricorn PTFE tube at the same time and never bother using the original included PTFE tube (the original is too large inside and the plastic filament can move in directions other than towards your hot end as a result, resulting in insufficient plastic filament moving to your hotbed [ie Print Surface] but the Capricorn tubes are narrow enough to prevent that flopping/bowing/bending and can handle far higher temperatures so it won't burn and release the horrible gasses into the air you breathe).
Buy a Creality CR10S and you'll be happy. Settle for a Creality Ender 3 and you'll hate that you are forced to buy an additional printer to print in higher temperature filaments like ABS, PETG, TPE, TPU, TPC, Nylon, PC (Polycarbonate), PMMA and nearly all others plastic filaments. The Creality CR10S is the absolute safest buy (and there's also even larger versions such as the CR10S4 which prints 400mm x 400mm x 400mm and CR10S5 which can print 500mm x 500mm x 500mm) thanks to TH3D Studio (www.th3dstudio.com/) which has every part you could want to improve it including a dual hot end kit so that you can print in 2 colors at exactly the same time.
I also recommend that you change out the extruder drive head (the part which grabs and moves the filament along) because the vast majority are too smooth and/or rounded to properly move the filament along. I went with these: Wangdd22 3D Printer Accessories 4pcs/lot 38 Tooth Mold Steel Linear Extruder Filament Drive Gear for Planetary Gear Extruder www.amazon.com/dp/B06ZYG5Z47/ref=cm_sw_r_cp_apa_i_sYwbEbZ7KMTQ4
Me: Oh the devil fruit from One Piece cool
Sean: Ohhh is this a dragon ball?
Me: Huhhh????
I’m glad you brought the wish videos back! We love them
The devil fruit is from one piece and u use it to get powers in the anime
Forgets the knife, brings back scissors 😂
Less go bois new vid
Best wish vids on the UA-cam
These vids r so 🔥
thanks fam!
I've been binge watching your wish videos. Very entertaining!
When the last generated word was "sausage:"
"Nevermind, we're done." 😂😂😂😂
Oh my god, the segment where he was smashing the camera absolutely killed me. 10/10 editing 😂
I'm dying laughing at him wearing the sailor hat 😂😂😂
Hey @ItsYeBoi since I watched your AirPods videos I watch your videos almost everytime! Keep it up!
"C'est quoi ça" 😂 I'm french and that was funny 🤣
Sean, you got the flame flame fruit. In One Piece, there is this concept called devil fruits and if you eat it you get powers. When you eat it you become unable to swim in water. You got the flame flame fruit which was possessed by the main character, Luffy’s, brother. The powers of the flame flame fruit make you a man made out of fire and you have fire based attacks. There you go papi. ItsYeWeeb signing out.😂
This video had a different vibe my g. It wasn’t as wavy as I’m used to. Where’s the energy fam.
I felt the same. Seemed like he was just trying to rush something to us vs making it entertaining.
Ayy Clicked as soon as the notification popped up. 🔥
Haven’t even finished the vid an excited
ayyy
6:10 French: C'est Quoi Ca
English: What is that
Yo should buy every anime product on wish🔥😂
It's freakin funny that whenever I see ads of Wish pop up...they show that the orders come with a wish box but yet all the orders that Sean has gotten been in freakin plastic bags 🤣
Buying clothes for my girlfriend off wish
Faythlyn Garland yes I second thissss
Replaced my gf clothes with wish clothes for 24 hours
@@JuanGoCr4zy Yasss
Buying a girlfriend off wish
Good idea
autolike! You're so awesome Sean! I'm excited for the new channel with Olivia and can't wait for the first episode =)
Who else gets happy when Sean uploads?
Autolike
Me
12:20 When you guys get married... please give that to Olivia!!!😂😂
Autolike. 🙆🏻♀️ Luv chu bro
Ohh yea the Devil fruits😎
The devil fruit is from “one piece” the anime
Omg the fact that you have no clue what one piece is 😩😩 lmao my heart
I want the devil fruits so badly 😭😩😩 I love that anime one piece is the best
It's Popeye the sailor man?😂😂😂😂😂😂lol. Sean you make me laugh?
Nobody:
Literally nobody:
Not a single soul:
Sean: 👊->🤚
What screw the driver?😂😂😂😂😂😭😭😭😭😭. ( Screwdriver). Lol
101 views 101 likes 101 comments, everyone wants you to get that printer my guy.
I am glad you bought a *Womens T-shirt and Halloween Costume* 😂
lmao, Sean I hhope you realize that your "ahoy" hat was inside out so it made the letters upside down
My favourite UA-camr been watching from the start
i wonder when he is going to figure out that the 1 dollar items are mostly limited quantity deals, meaning only the first person who gets their order processed gets the item
You should do a wig wish video with your wife!!!!
U should do weapons on wish like so yehboi can see 👇🏽💯
Itsyeboi is my favorite UA-camr/podcaster
ayy podcaster i'm h'd
Second like🤭
ayy let's go!
It’s to parker
It’s to parket
A video idea is buying all funko pops from wish
Wish must be paying him bank for keeping up the wish series
Nah man it's just getting him views 😂
Omg are you really that dumb??? If they were paying him he would say it because paid videos get more views and that would obviously get Wish more publicity. Do you have no clue at all how advertising and sponsorships work????
you are so funny, when you said “aren’t you supposed to hit shit and turn around” made me laugh so hard😂
“Autolike”
Also for some reason couldn’t load your podcast channel or find your couples channel. What’s your podcast channel named?
The devil fruit on the table for the longest time loll
Wait where’d you get a wind turbine from😂
Emmortal 34 wishhh
It's ye boi dropping bangers like always 💪
Sean said he is spoiled by his hUsBaNd
hMmMmMmMp🤔🤔
Autolike
Thanks for the entertainment!!! Can't wait for the iPhone 11 giveaway!👍🏻🤞
Quem for do Brasil baixa o App e usa meu código que é sfmtkfy
Quem não for BR pode usar também
Hi big fan love the series thanks for uploading right after I finished homework
Wasn’t the alboe house his house but he let the others rent their stay in it ? I really wanna know
Shurog 1 no they share rent for the house but he moved out now
@@XxIntroAgarioxX Didn't they all move ?
P Jay yeah sadly the house is gone
@@XxIntroAgarioxX sadly they had the best videos taking in that house
You should do 10 cheap items and 5 expensive things and see witch is better
Does Sean actually reply??🥺🥺
is the sky blue?
Well he answered your question.
ItsYeBoi no it yellow
6:47 hell yeah one piece stuff the fruit you got is called the Mera Mera no Mi (flame flame fruit) (for those who don’t know the devil fruit is from one piece it’s the fruit that some people eat and they em get abilities but loose their ability to swim and will drown if they try simplistic explanation)
Create a room made out of wish items
Like this to get it pinned👇👇
Love the Wish Vids... Crazy my friend
You should do a video comparing wish with amazon stuff
Dead when the vacuum falls off the table 😂😂😂
Do a home theater setup using only wish. The top rated projector, screen, sound system, dvd player, and you gotta have furniture. To add to the challenge see if you can even buy a movie.
You should buy some things for your new place get some things off from wish?😂😂😂😂😂😂.
Do this one next with the team.. "Who can make the better rap song!"
It's a Devil Fruit called Fire Fire, Which obviously gives you fire powers :). Ace who had this fruit is one of the most popular characters in one piece.
Sean: this is the LAST ITEM OF THE DAY!
Also Sean: next up we have the speaker.
Me: sounds about right
Kat Gee no that was the last item of that day he meant
13:16 I was like is he summoning Thor's hammer? And then when you caught the actual hammer I died.
AYE I'M EARLYYY. HUGE FAN BTW. been following for a longggg time now🥰
Dude this Wish thing will drive you crazy.
Ily sean and love the vids. Keep the grind fam.
Buy some cool gadgets like smart watches,car accessories, phone accessories and so on .... content alwsys dope man keep it up.
Itsyewish is backkk
You're Awesome ItsYeBoi you make me happy everytime
Could you do a video on the "Smallest products on wish" please
:)
Omg that robot falling on the floor😂😂😂
Plz keep on doing wish videos that will blow you up no cap
Lowkey the wish vids are hella fun to watch 😂 ... autolike
Too funny...I was debating buying the One Piece Anime devil's fruit, but now I'm so gonna add it to the collection...
PS...that robot vac...those were the mop attachments 🤫
I love when you buys some cool stuffs in wish and unbox it. It is so satisfying to watch. More blessings and love 🌟 "autolike"
As I'm watching ur video I swear a wish ad just pop up how ironic!
I love it when I get a wish ad on a wish video.
fidget toys, slimes, game consoles, weird things, animals, flags, cat stuff, dog stuff, small animal stuff...
Since you never have a knifeto open up the packages, you should buy the cheapest / best rated knives, axes, swords, anything bladed on Wish
This vid was amazing like always I love your vids
Love your videos!
You should do one with ABLOE. First, generate random words, put that into search bar. Generate random number to select which option in the autocomplete. Generate another random number to select row. Generate another random number to select which item on that row. Then finally generate a random number to see who in ABLOE has to buy that item.
And if you wanna troll, generate a random number one more time to see who that item goes to. May be a good Christmas gift idea.
Yes I love the wish videos
I watch your videos every single time I can get on my phone it’syeBoi
Ive been watching Sean since the noodle challenge with wolfieraps big up Sean
Mans had the Ahoy hat on upside down, fixed it, and it was still upside down 😂
build a gym for the office only using items from wish or build an arcade using items from wish!!
Love the wish videos 😂❤️
Would love to see you try out Garden and home stuff!!