High Speed Brushless Fan 50mm 40mm 32mm 29mm Jetfan Comparison
Вставка
- Опубліковано 30 жов 2023
- Accessories link : s.click.aliexpress.com/e/_onp...
rcmodel.aliexpress.com
The winding is our own modified winding. Can be activated using the RC ESC.
Cannot work without ESC.
200000 rpm high-speed.
Strong wind can be used to blow dust and so on.
Material：Aluminum alloy
KV value：
29mm=9000KV, 32mm=13000KV, 40mm=15000KV, 50mm=14000KV
Power：29mm=160W MAX in 12.6V.
32mm=390W MAX in 16.8V
40mm=460W MAX in 16.8V.
50mm=715W MAX in 25.2V.
MAX. Current：
29mm in 12.6V is 12.8A.
32mm in 16.8V is 25A
40mm in 16.8V is 29.8A
50mm in 25.2V is 30A
Working Voltage:
29mm=7.4-12.6V
32mm=7.4-16.8V
40mm=7.4-16.8V
50mm=11.1V-25.2V - Навчання та стиль
HE HAS THE STRONGEST FINGERS TO GRIP
@@user-f_y_m🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
More .....👇
🔴 THE RETURN OF JESUS
Is there a ready-to-assemble kit available for purchase that includes a 50mm jet engine, a driver (control logic), and a battery, all housed in a casing?
hallo can i use this fan with dril battery 6s 35 is 22v 5 amper my battery is 22v 5 amper ?
Hello I'm interested in buying a couple of these fans... Id like to know if these can be running for extended periods... lets say 1 or 2 hours continuously??
What is the pressure in PSI?
How much amp of ESC is sufficient to run this motor ?? And which is more powerful 5A or 3.5A version?
Спасибо за обзор, теперь понятно по тяге:
50мм - 700гр
40мм - 500гр
32мм -300гр
29мм - 170гр
Есть ли готовый набор для сборки, который можно приобрести и включает в себя 50-мм реактивный двигатель, драйвер (управляющую логику) и аккумулятор, все помещенные в корпус?
Совсем недавно прикупил готовую воздуходувку с 29-той турбиной. Крыльчатка там с конусным куполом с более длинными лепестками. Без насадок с полной зарядкой и зазором как на видео выдает 210 - 222 грамма. Но возможно весь секрет в повышенных оборотах.
I absolutely *love* this channel!! Ever since I bought a Kica Jetfan 2,
I have been:
1. -Obsessed with these electric turbines
2. -Freaking disappointed that I bought a damn Kica Jetfan 2 🤣
I’ve got a GenX 40mm on the way now.
I’d love to modify my Kica Jetfan 2 to have much more power 🤙
The 40mm motor is larger than Kica and has a much higher power, they use different voltages.
Hi sir . What esc did you use at the 29mm bldc fan thank you sir in advance 😊
Where to buy these?
How many minutes would the 50 mm run for at medium speed? And at max speed with the type of battery you're holding in the video. I think many of us watching this video would like to know this.
It's crazy.. 😮
I want thissss
Bearing will destroy soon. But I love it :)
These are so cool that I bought 3 of them and made a couple videos where I made a 3D printed housing for them!! So you’re the one who make these!? Very impressive!
These are using a programmable ESC right? I tried searching for the specific ones I got with the ESC + Fan combo I got but all I could find were similar ESCs that were all programmable, if so that makes it even cooler!
Very impressive that you guys unwound the motors and modified them like this!
May I have the 3D print file??🙏🙏
@@bulldog43-u5csure! I’ll try and update the description of my video with a link soon
@@bulldog43-u5c do you have a 3d print file?
do you have a 3d print file?
I want this
What’s noise of 50mm unit? I want to buy one and use as homemade 3d printed hair dryer but I might use at lower rpm.
The noise is not very loud when driving at a low speed, but I have not tested the noise before. The speed can be adjusted through a knob
I have a few of the 32mm fans and they are so loud I’d recommend using ear plugs when using them at full speed. Great product and apparently they’re custom modified too so it’s even cooler!
do you have a 3d print file?
1:00 great test😂
Haaaa best test in the vid 😆🤣
Is it a factory? Do you mass produce? I am interested in 50mm. I would like to know the unit price when purchasing more than 1000 units.
The wire doesn't seem to have any connection processing. Is there a 50mm one with a 3-pin connector?
The connector can be soldered, you can contact me on AliExpress
@@twcai8232как связаться?Отправьте ссылку на Алижкспресс
@@twcai8232wow so you are the ones that make them!! May I say you’ve done a very impressive job with the modification of the motor!
I love seeing unique stuff like this! I wish you the best :)
How can you make a fan have such power? Manufacturers like delta do have strong fans, but not that strong. Do you stack multiple fans on top of eachother and make them rotate in opposite directions?
These fans as far as I could find usually require very high voltages, but it seems they have modified the actual motor windings (inrunner BLDC) and from what I can tell used a programmable ESC to work with it. Quite impressive.
I got like 3 of these because I was so impressed and made a couple videos on them where I made a 3D printed housing for it. :)
@@KeonsLabdoes it require to run with ESC ????
Hello sir....does this motor depend on the battery???
yes，RC lipo battery
@twcai8232 so I need to use 4s - 6s battery to get the maximum speed of the motor...
29mm motor 2-3s，32mm and 40mm 3-4S，50mm 4-6s
The motor I use is the original...not modified...I have tried the 2s battery but the fan is too slow...I have tried the esc you use...but it is too slow....
@@paihih7158use a 5A motor instead. And USE 3S battery. It depends what is the requirement of the motor you use. For example. If you have. 3.5A 9v-12v culvert motor, then 3S battery of minimum capacity 5Amh lithium ion battery in series to run it for like 2 hour. If you use 5A then same with same specifications you can run it for like 1.5 hour, give or take. You need a ESC of minimum 20A for the safety of the motor and the internal circuits.
It is too expensive. I will order it if they are 50~60% price.
It seems that they’ve custom modified these motors to be able to run using a lower voltage ESC by modifying the windings and pairing it with the appropriate ESC,
They are a bit expensive but given that it’s a custom job I think they deserve it! They’ve done a fantastic job with the modification so in my opinion it’s worth it :)