Audi Hill Hold Assist Retrofit...Can It Be Done?? | How to | DIY
Вставка
- Опубліковано 10 вер 2024
- #audi #mustang #fastcars
➡️ Merch available from www.puddlt.com/fun2drive ⬅️
Audi Hill Hold Assist Retrofit...Can It Be Done??
In this video, I attempt to retrofit Audi Hill Hold Assist into my 2011 B8 S5
I thought I mentioned the wiring in the video, buts its pretty simple, its:
blue/white switch/pin 12. ➡️ ABS Plug/pin 8
black switch/pin 10. ➡️ ABS Plug/pin 16
brown switch/pin 11. ➡️ ACC power
Check it out!!
=============================
🔗 LINKS to parts used in this video
=============================
Car Parking Brake Hill Start Assist Switch - amzn.to/3FWwcj0
Auto hold switch wire cable Harness - bit.ly/3Fv6GzR
Enjoy!!
➡️ Subscribe for more great content bit.ly/2SwFOuE ⬅️
For more interesting car videos be sure to check out my channel bit.ly/2SwFOuE
10 Features you didn't know about your Porsche 911
• 10 Features you didn't...
Land Rover Discovery Sport - 10 hints and tips
• Land Rover Discovery S...
Porsche 911 kenwood install with bose and steering wheel controls detailed
• porsche 911 kenwood in...
=============================
🔗 CLOTHING LINKS
=============================
www.puddlt.com...
=============================
🔗 SOCIAL MEDIA
=============================
Facebook: / fun2drivecars
Instagram: / fun2drivecars
=============================
🔗 LINKS TO MY GEAR
=============================
Sony ZV-1 - amzn.to/3NnThxi
Gopro Hero 5 Black Digital Camera - amzn.to/3SI2BNn
DJI Osmo Action 4K Digital Camera - amzn.to/3sGU6ru
DJI Mini 2 Drone - amzn.to/3TKGPKo
PNY Mobee Gimbal Stabilizer - amzn.to/3gReK5A
RØDE Wireless GO microphone - amzn.to/3Uoe85Z
Rode Lavalier Go Microphone - amzn.to/3TRWesf
Rode VideoMicro Microphone - amzn.to/3SR3l2O
Sony HDR CX405 Handycam - amzn.to/3TKpP6Q
Apple iPad - amzn.to/3DJU08R
Apple iphone Xs MAX - amzn.to/3sIrmP3
Dragy Performance Meter - amzn.to/3SKuggQ
Apple Macbook Pro 2019 - amzn.to/3NgEBji
Some links in the description are affiliate links that if you click on one of the product links, I’ll receive a commission at no additional cost to you. As an Amazon Associate I earn a small commission from qualifying purchases.
23:33 Great Video! The fault Code is because someone updated the MMI Nav and forget to code it afterwards right
Yea, managed to clear that now, thanks!
Great video thanks for doing this!. My girlfriend has a T-ROC with this and I had to have it on my B8.5. Followed your video step by step and I believe I bought the same wiring kit as you. What I will say and for anyone buying this wiring is the pins for the ABS unit & fuse box are completely wrong (at least for the 8.5). I spent hours trying to get them to stay in so bought the correct part which clipped straight into the plug and works flawlessly. I also managed to get the genuine switch for £12.50 off a breaker 😏
Where did you get the correct wiring harness from, thanks
@@geoffreyedmundson9928 Same problem, where buy? lol....
Awesome video and I don't even have an Audi that needs it. I have a US spec 09 CC vr6 4motion and has Auto Hold.
Anyway. Hope your channel grows big! Straight and to the point!
Many thanks my friend!
nice job! One work-around with the LHD switch that you could have done is to swap the position of the switch with the coin holder, so you'd have the switches just above the start stop button, like on a LHD car, not the proper proper way to do it but hey... :D oh and I guess you would need a LHD coin holder then... still not ideal
cheers mate, yes, I did actually think about that, but, as you say, you would need a LHD coin holder, and also you would be reaching over/around the gear lever each time to turn it on.....
Does it work for if its manuel?
Great video!
Thank you so much!
Great Video. I used it to install the system but it is still not working. Anyway more important is i lost the cap of the abs connection. Do you know where I can get a new one? Thanks a lot.
try audi!!
Thanks! Super helpful. What did you end up using for the fuse? Can you link? I’ve wired the switch still need power, firewall run, and ABS connect.
A fuse tap
Hi, is the hill hold assist included in the a3 1.6 s line sportback or isit a optional extra. if not, can I have it fitted directly through audi and if so do you know roughly how much the cost would be.. Cheers..
No idea, sorry
hi, great work . can you share the pin numbers on the abs plug?
I thought I had done in the video, but it appears I didn't! It was on the instructions that came with the cable, you connect pin 12 of switch with pin 8 of abs pump and pin 10 of switch with pin 16 of abs pump
My audi a5 has start/stop function, do you know if it's possible both to work together if i retrofit autohold?
I would say so, as the hill hold just works with the ABS and nothing to do with the engine
@@philscars Well, when you stop and hold the brake pedal down the engine turns off and letting go of the brake turns it back again, so yes they would work together but it wouldn't be effective because to keep the engine off you need to always keep hold of the brake. Thank you for the response though
Hi pal. The pins you shoved into the back of the ABS plug, did they end up holding in? Or did you have to readdress it?
Nope, they have never moved!
@@philscars wow that’s ace. On yours, on the actual holes for the wires on the abs plug did you have little rubber blanks in each wire hole that stopped you pushing it straight in? Doing mine currently and every hole on the back of the connector that doesn’t have a wire in already has a little what looks to be rubber blank in to stop water ingress.
is fitting this to the b8.5 the same or diffrent?
I would expect it’s very much the same
@@philscars thank you il give it a go let you know how i get on then u can put it in the description for others. thanks for the quick reply
@@philscars hi iv installed it and can confirm its the same for the b8.5 Audi a5
Nice video can you please tell me which number you connected the 2 wires to in the engine?
It's all in the video!
@@philscars will this work on a manual
Hello i have done the retrofit every thing works fine but the switch light dosnt come on only indicates on the dashboard what coud be the problem
faulty switch?
@@philscars the switch was working on the donor car :(
Shoud the tire preasure monitor turned on on the coding menu becouse my isnt turned on only the hill asist function
Did you use a rubber seal to feed the wire through before plugging it in the abs? Does the kit in the link has such a seal?
Kit has no seal, I put in a small seal that I had from another connector
@@philscars Cheers! In case that I cannot wait 1 month for the delivery of those cabeles, can I just buy 3 auto cables and install the specific wire heads separately? I bet that the wire is just a refular auto 0.5mm wire and not somrthing very specific, what do you think?
That would be fine, I think they are signal cables and not heavy current carrying
@@philscars Cheers!
How can I check if my car is installable?
I think I tell you to check your brake control unit for the code that will work
Ok thank
My car Audi q5 2010
Would this work on a 6MT?
If it has the same abs unit I don't see why not!!
This is an awesome mod, looking forward to doing the same to my B8.5. Would the entire process be the same for a B8.5 as it is for the B8?
hi mate, thanks for the comment, I would expect it to be the same yes.
And did you get a RHD switch?
Yes I did
Can you send me the link I am looking for one
@@philscars I have watched the video about 6 times but you connected the 2 wires to the abs socket but pin 1,2 or 3