Laying out boxes and running wires at the beach house | PPBH Part III
Вставка
- Опубліковано 4 лип 2024
- In this video I show you around the house and some of the early work at the beach house.
Electrical Wiring is NOT a hobby. Call a licensed electrician!
Classic Electric, LLC | Point Pleasant, New Jersey
License & Business # 16557
(732)-770-1437
Want to be an electrician? Start here: www.myelectriccareer.com
Ron Pecina Jr. is a licensed electrician in the state of New Jersey since 2009.
This allows him to apply for electrical permits, work with live conductors, remove meters, and disconnect service from the utility company.
New Jersey observes the 2020 NEC and the Uniform Construction Code.
The majority of the work you’ll see on my channel falls under the New Jersey Rehabilitation Sub Code (Chapter 6 of the U.C.C.) www.nj.gov/dca/divisions/code...
* ALL New Jersey licensed electricians MUST complete 34-hours of continuing education units each tricentennial period.
* This includes a mandatory 9-hour code update course and (1) hour business law class.
* Any work above 10-volts requires an electrical license in New Jersey.
Ron is an active member of the New Jersey Independent Electrical Contractors Association.
Become an NJ-IEC member here: www.nj-iec.org
IEC National: www.ieci.org
Customer Guide for Electrical Installation; JCPL: www.firstenergycorp.com/conte...
Customer Guide for Electrical Installation; PSEG: nj.pseg.com/businessandcontra...
WANT TO SEE MORE? FULL 200 AMP SERVICE UPGRADE. WATCH HERE:
Classic Electric, LLC is a Generac standby air-cooled generator installer. Generac Dealer # 1019500
Ron Pecina Jr’s set up:
Camera: Go Pro 9/ 10 w/ the Media Mod
Microphone: DJI Wireless
Editing software: Apple iMovie
Animation software: Apple Keynote
Background Music & Sound Effects by Soundstripe.com
Like, Share, and Subscribe! - Навчання та стиль
Caddy also has a Flordia Bob. Jim is a electrician out of Colorado who came up with the idea.. Dont ask what LMA69 stands for😂 Love the videos. Keep em coming. Thanks Ron. 👍
Hello my friend❤Your video is amazing!💐 Content that inspires and motivates many people!!🌹 Keep uploading good videos!💮Good luck and good mood👍❤❤❤
Nice work Ron. Thanks for posting
Beautiful work as always Ron! 🏆🏆🏆
MC cable for fireplaces, yes sir. Seems very sound, though i hadn't thought of it.
Thank you for sharing your knowledge.
Really enjoy your videos. Learning a lot by your narration and explanation of what and why you do what your doing.
Hi.ron nice work .in use those metallic straps when you go out to the box in mc cable Meabe can use in Romex.
I always call them caddy straps. But cactus jacks or Colorado jim or whatever they are called sounds good too. Nice job over all, and I like the mc to the fire place even though nobody will ever probably notice its it is a great idea and cool that you went the extra mile.
Love the videos man!
Love the videos Ron. I’m a third year apprentice doing just residential. Nice to see how you do things and understand better what I have been doing. Keep it up!
Nice Job
Never seen those Colorado Jim’s before, look pretty neat . The company I work for uses stack it’s.
I use the flat brackets for my canless recessed lights instead of those new construction canless plate. They work much better and most importantly way easier to install.
awesome
Love the motion sensor luminares but have been in rooms that only had two of them and if you are working at far end of room guaranteed they will put you in the dark. Believe motion detector luminares are not legal in switchgear rooms.
I never saw CJ6's for Romex. This would save much cost when I was doing Resi several years ago
Nice Ron👍. Hey go get some Caddy sgb16 box brackets. Check them out long story short. You’ll love them and have many uses etc. the colorado jims are great
You are absolutely right. I would love those brackets! This would eliminate having to cut up 2x4's for those boxes that might end up ion the carpenters finish trim. Thanks for that tip Anthony.
@@electricalron also use then to center boxes where you need them. Good luck on the renovation. I miss doing electrical work. Retired now after 38 years
Ron thank you so much for your videos. Two questions. What drill do you use to staple your cables and how about your headlamp? Would love to buy them. Thank you again and thanks for all the videos you do. You have helped me out many times !
Hi Ed, thanks for your kind words. The staple gun is made by Dewalt. The headlamp is the 600 Lumens version by Milwaukee.
I can’t find part 2 . This one says part 3.
what height do you put the switches at during rough in?
=VAN HALEN= 🔥🔥🔥
Can you give the name of the attic light fixture please.
Satco 24” LED wraparound with occupancy sensor.
👍🍿🍿
Unoccupied job....you must be living right...!