Extinct Motorsports Dual Electric Radiator Fan Kit installation

This is the how to installation video for our Dual Electric Radiator Fan Kit and shows the Extinct Hack for removing the radiator of a D2 without disassembling the entire front of the truck as described in the factory service manual. This is the companion video to our video blog of about Upgrading Engine Cooling Using Dual Electric Radiator Fans located here: • Upgrading D2 Engine Co...
Installation Time: Approximately 2 hrs.
Chapters Include:
1. Introduction - Tools used and Kit Contents 0 - 2:30
2. Radiator removal 2:32 - 20:06
3. Fan Mounting Bracket Installation 20:06-24:17
4. Dual Electric Radiator Fan Fitment 24:17-32:49
5. Wire Harness Installation 32:49-37:31
6. How to find on the website: 37:31-39:25
Related Links:
Dual Electric Radiator Fan Installation Kit Product Page:extinctmotorsp...
Video Blog: • Upgrading D2 Engine Co...
Upgrading D2 Engine Cooling with Dual Electric Radiator Fans Written Blog Post: extinctmotorsp...
Fan controller link: daviescraig.co...
Fan purchase link: a.co/d/bGaxnlq

[@eklipsephil]

Nice work! This should work for a D1/Classic also, right?

[@extinctmotorsportsengineering]

Of course if I see enough demand I will make a custom kit, but most of the kit would be usable except I think the radiator mounting brackets. I have not checked the size of the D1 or Classic radiator relative to the D2, the Maxima fan is almost ideally sized for the D2 so the fit might be off a bit for a D1 or Classic. So lets look at worst case:
1. Fuse panel mounting bracket is not an ideal fit, mod it to fit somewhere else or just mount the panel and relays to a different bracket
2. Fan mounting brackets do not work - fam new fan mounting brackets.
2. Maxima fans not a good fit to the radiator - either cut the maxima fan shroud to fit, or mount the fans to a different shroud. Plug and play wiring should still work. Or, to use different electric fans just cut the connectors ends off and wire them to your choice of fans.
Also, have not checked the fit of the gauge pod to the D1 or classic binnacle but I have a more straight up pod that would work for both of those, send me an email and I will send a pic.

[@lifewithnofilterlnf4911]

Do they work with the "oe" nissen radiator for discovery 2?

[@extinctmotorsportsengineering]

Yes, the Nissen or any other stock replacement radiator.