Hey man I just wanted to comment and say thank you for making this video. I’ve never worked on a car before and with your video I just replaced my radiator by myself! You’re awesome!
Thanks guys! Nice video! I watched this before I did my 2008 Maxima. I wanted to give a heads up to anyone doing a 2008 Maxima radiator replacement. The 2008 is much simpler. Remove the front nose, battery, battery tray, hoses. Then the trick is to remove the cooling fan wiring harness. It is held in place by plastic clips. Then remove the fasteners holding the cooling fan assembly in place. Then pull it straight up and out. Then, with a little finesse, you can carefully pull the radiator up and out. Thanks again for the video.
Even years later you’re still helping👍🏾. Thank you very much. My upper transmission cooler line is leaking a little bit I think it’s the clamp being weak. Easy fix💯
How did you get the transmission cooler lines reinstalled? It's a difficult position to reinstall it from. If couldn't get the connector to the condenser off as well.
So if I’m just replacing the top two radiator hoses what would you recommend to get to the clamp closes to the radiator I’m swapping mine out and bought the to upper hoses and filler cap as all one unit Nissan only sells it that way and the clamp is upside down like on the hose in your video
I have a 2014 Maxima and i can see through the grill and the condenser (i thought was the actual radiator) was bent in very similar way to that one. The AC works and I’ve driven 250 plus miles at one time and the engine never seems to over heat... should i be alright?
I replaced the condenser and radiator I plugged everything back but for some reason my car fans stay on and is now over heating nothing is leaking what could it possibly be?
I tried to explain to my customers why the labor to replace the Fans is $400.00...You have to remove all that shit plus the support frame. As the Fans are built into it....
Childish mistake. You need to do an inspection of the vehicle and find a bent to hell condenser. Childs mistake. Common sense. But I guess your job is as a pos wholesale dealer mechanic so who gives a fuck right?
This helped 🫡 even tho I didn't know what I was doing, and them hose clamps sucks 🤦♂️ let me tell ya, and all u need is a 10mm and it will be your best friend. Ty sir. 5.31.24
Hey man I just wanted to comment and say thank you for making this video. I’ve never worked on a car before and with your video I just replaced my radiator by myself! You’re awesome!
watched so many videos for this got a quote of 700$ to replace my 2011 sv max and this was the best explained video so far man THANKS!
Thanks guys! Nice video! I watched this before I did my 2008 Maxima. I wanted to give a heads up to anyone doing a 2008 Maxima radiator replacement.
The 2008 is much simpler. Remove the front nose, battery, battery tray, hoses. Then the trick is to remove the cooling fan wiring harness. It is held in place by plastic clips. Then remove the fasteners holding the cooling fan assembly in place. Then pull it straight up and out. Then, with a little finesse, you can carefully pull the radiator up and out.
Thanks again for the video.
Even years later you’re still helping👍🏾. Thank you very much. My upper transmission cooler line is leaking a little bit I think it’s the clamp being weak. Easy fix💯
Thanks dude! I couldn’t have done it without your help 👍
Thank you!!!!!!!!! I followed all your steps and it came out perfectly.
Great way to make the video. Explaining where everyone can understand and then doing that step. Enjoyed and very informative.
Best video so far on how to do this job! Thank you!
Good video
You explain everything really well.
Eyyyyy you found a life hack for us all!! Thank you so much for this awesome video
Solid video. Great job 👏🏿👏🏿
What is the second catch tray for? Not the bucket with the coolant in it, is it catching transmission fluid or is it just water?
Thanks for this video im attempting to do this myself soon im going with an all aluminum rad
How did you get the transmission cooler lines reinstalled? It's a difficult position to reinstall it from. If couldn't get the connector to the condenser off as well.
Thanks for your tips. I may have to do this same task on my neighbor's car in a few days,
Thanks for the step by step video!
So if I’m just replacing the top two radiator hoses what would you recommend to get to the clamp closes to the radiator I’m swapping mine out and bought the to upper hoses and filler cap as all one unit Nissan only sells it that way and the clamp is upside down like on the hose in your video
Thanks. This video helped me a lot.
How did you put back on the Trans coolant hose back on .. very hard to get to ?? .. (bottom hose)
Take the battery out. You can reach all of them from the back side real easy...
Wowwwww good info with all the details Thanks
You guys make it look so easy 😮
How many hours labor is that job?
Thanks for the info about to change out my kids radiator fun times
I have a 2014 Maxima and i can see through the grill and the condenser (i thought was the actual radiator) was bent in very similar way to that one. The AC works and I’ve driven 250 plus miles at one time and the engine never seems to over heat... should i be alright?
How much the pressure for Cap Assy- radiator .. 137 or what ?
Thought that coolant was blue for Nissans?
What’s the 2nd tray for
I replaced the condenser and radiator I plugged everything back but for some reason my car fans stay on and is now over heating nothing is leaking what could it possibly be?
Temp sensor
Alright I’m trying to put a new radiator in my Maxima and I can’t get the drain plug to fit into it’s slot due to the housing for the fans, any tips?
Awesome 👏🏽, but to go in on one tomorrow
what kind of tool are you using to remove the screws?
Awesome video life saver
Can anyone verify what the little cooler on the passenger side in front of the condenser is for?
Probably power steering cooler
Yes power steering
Thanks for sharing
How did you know it was a bad radiator? You never told us how you diagnosed it.
That’s how you do a video gg brother
Thank you!!!
Bet this made my dad because every where else be like condenser and extra shit
Thank you
I tried to explain to my customers why the labor to replace the Fans is $400.00...You have to remove all that shit plus the support frame. As the Fans are built into it....
Yeah they just see the $ amount and freak out like it should be way less but this is one of those cars that everything is difficult to get to
Childish mistake. You need to do an inspection of the vehicle and find a bent to hell condenser. Childs mistake. Common sense. But I guess your job is as a pos wholesale dealer mechanic so who gives a fuck right?
Damn lol someone’s butt hurt 😂
@@autorepairdudes7116 The guys name is A B. Not a good sign...
This helped 🫡 even tho I didn't know what I was doing, and them hose clamps sucks 🤦♂️ let me tell ya, and all u need is a 10mm and it will be your best friend. Ty sir. 5.31.24
Thank you