#Honda_Xblade
Вставка
- Опубліковано 21 жов 2024
- Here I am facing one issue with my Honda Xblade 2018 Model Bs4, whenever I start my (10-15 gap) bike RPM goes to high around 1500RPM for 10 second and then automatically get to its normal 1200RPM. I am facing this issue from last 15 days. I think it is something related to carbonator tuning.
This is in everybike its normal and if you feel doubt about it do ask in service centre
This is bs4 bike and it's is carburettor issue, this is the issue of main jet and diaphram.
I have purchased bs6 xblade, its been just 2 weeks and during idle start rpm is 2500 after 2 min itll become 1400 rpm. What should i do? it is normal?
It's normal, it is auto choke option in bs6 because of fuel injector system and sensor, which increase rpm in cold or first start after few second when engine and oil get warm it reduces to 1400 +-
@@TechnicalAspects88 but during every start after 2 hrs gap rpm is going high like cold start and later becoming normal
@@harshithk8984 it's normal, but in my opinion just visit service centre and ask them to clean fuel injector with WD40 spray.
@@TechnicalAspects88 okay thanks
Its completly normal, as I have the same version of yours bike, its due to FI which help the engine to reach its desired temp so that the oil passes through all over the engine..
আমার x blade এও এক্সাক্টলি এটাই হচ্ছে।😓
In my bike it gets slow gradually and stops automatically.
Please nearby service centre, I think it is issue with cleaning fuel injector system
xblade seatcover kha se mila
From service center in 2018
I have same problem
Clean the carburettor and tune it again also check all the air pips and hose pipe for any suction related problem, alway keep your bike clean from dust and also keep clean your bike carburettor area and airfilter.
Ki