Pagka dakong tabang na imo computer tester..kay og wala pa na , tag an tag an gyud mahitabo daghan piyesa maoasanginlang daut… og pasoas ang trabajo … kay sure sure !
Hi, the scv needs to be reprogrammed after change it? My isuzu dmax 2015 wont start and it have no codes, the injectors were tested and they are ok. The engine only start with starting fluid but if i stop using it, the engine only cranks
Boss nag change ako ng suction valve hardstarting siya boss pag mag start na ok naman ..ano kaya ang problema boss para kulang nang fuel pag magstart thanks 4jj1 po ang engine...
Ano kaya problima sir okay naman linya ng fuel galing sa tank patungo high pressure pump pero kailangan pang bumbahin para umandar tapos kong patayin mo naman tapos paandarin ayaw naman umandar kailangan pang e pump
Good pm, Lods kung sa mga Isuzu minitrucks 24v 4hl1/4hk1 Ano dapat ang desired fuel rail pressure sa idle rpm kumpara sa Mux/dmax na 30k to 31k stabled Maraming Salamat More Blessings from Holy God Happy 2023
@@armansretunedgarage Maraming Salamat sa pagsagot, Lods Nagka problema kac ung Mini Trak na Dina drive bigla ko Bigla Humina, Nag check engine tapos ok naman Max 4k rpm muna kaya tinigil ko, wala kac dala scanner. Pero pagkalipas 2 hours sa byahe bigla bagsak na yung Rpm to 3k max Rpm, unti unting bumaba rpm naging max 2.5k max rpm tapos ung huling Andar 2.3k Max rpm then bagsak to 2.1k max rpm, kaya stop na ko paggamit, Lods Hirap pala hanapin sira nyan kung mumurahin scanner, ano kaya naging sira nyan, Lods Maari kaya ung scv humina na pressure, Easy engine start naman at hinde mausok, Biglang low power at unti unting bumababa na max rpm Anlau kac area ko, at nag try lang ako order fuel rail sensor, try ko pinalitan pero same pa rin 2.3k max rpm pa rin, ginamitan ko multi tester ung brand new fuel rail 0.5ohms lang sya parang factory defect Na tester ko kac resistanced ung pinagpalitan fuel rail sensor umaabot na 11ohms, Normal lang ba ung 0.5ohms resistanced sa brand new fuel rail for 4hk1/Navarra Salamat Muli
@@armansretunedgarage Exhaust Filter, Lods yun ba yung Dpd filter, pinatanggal na kac un, pero hinde pa deleted Egr at dpd Pero napansin ko meron syang Engine exhaust Brake, Lods parang may baso connected sa tubo ilalim dpd filter Huling katanungan, Lods Normal ba ung 0.5ohms resistanced sa brand new fuel rail solenoid Sensor Hanggang sa Muli, Lods Maraming salamat sa Lahat ng mga petmalu na Diy Tutz
Sir good day po ung pumbas sa scanner ng mechanic sa dmax 2007 ko is P1094 pinalitan na namin ang suction valve control tapos.. hindi parin na solve. Ano po ang problem ng sasakyan ko? Slmat po
Condition for Setting the DTC FRP Regulator Commanded High DTC • The ECM detects that the FRP regulator commanded fuel flow is more than a predetermined range for longer than 10 seconds when the engine speed is near idle speed. Fuel Pressure Drop DTC • The ECM detects that the fuel rail pressure is dropped more than a threshold when the commanded fuel is cut.
@@norwindaveramirez6089 hindi pa po ako nakaka palit sir.. inuna ko muna ang 2 fuel injector.. sira din kasi.. Naistastart ko naman po.. kaso yung nga lng.. nag iispray ako ng gasolina sa intake hose.. para po bang priming..
@@armansretunedgarage ask ko lang din sir me leak po don sa front ng makina ng dmax ko 4jj1 engine me idea po ba kayo kung magkano yong gasket at Oring plus labor na din po,ala po ksi ako idea,nabili ko kasi dmax 2nd hand 2008 model.salamat.
Boss matanung lang Hyundai accent crdi ko po mausok kahit nka idle lang lalo na pag apakan black smoke po Hindi nman nagbawas ng langis wala rin usok sa depstick
Pagka dakong tabang na imo computer tester..kay og wala pa na , tag an tag an gyud mahitabo daghan piyesa maoasanginlang daut… og pasoas ang trabajo … kay sure sure !
ayos ka talaga lods huling huli sa scanner ang issue ng makina!!
Maayo jud ni si boss arman ba.. 😇
nice sir arman
Thanks sir
Iba talaga pag may scaner
Yes po..
Dapat makita actual live data ...
Para mas madaling ma analyze ang trouble
👍👍👍
Hi, the scv needs to be reprogrammed after change it? My isuzu dmax 2015 wont start and it have no codes, the injectors were tested and they are ok. The engine only start with starting fluid but if i stop using it, the engine only cranks
Not needed
Can a defective suction controll valve cause irregular rough idling on a 2009 250Dteq?
Just had a full service and the problem remains
Yes possible problem suction control valve and or maybe one of Injectors has a malfunction
Ang galing mo talaga idol brod Arman ? saan nga banda Ang location Ng shop mo?kung malapit palang Tayo Dyan talaga Ako sa iyo magpamaintenance SA iyo?
Davao city po Ako Sir
@@armansretunedgarage asa dpit sa Davao ser
@@edwincatucag3516
Catalunan grande Davao city po
Is there any video about Ford ranger like this? Please make a video
Thanks po Sir
I will try next time...
Boss mux ko pumapalya at namamatay ano kaya problem bagong palit na din fuel filter? Kung scv ang sira saan po nakakabili online? Thanks
Boss nag change ako ng suction valve hardstarting siya boss pag mag start na ok naman ..ano kaya ang problema boss para kulang nang fuel pag magstart thanks 4jj1 po ang engine...
@@rolandorecto-n7i
Check fuel lines and injectors
Boss gud am.. kanang scv related ba na sa fuel temperature sensor nga high input
Hindi po... Related.
Separate wiring po fuel temperature sensor. Pa double check wiring
Sir Arman, ano ang number sa Vic brand ng fuel filter MUX RZ4E? Thanks.
VIC f193
@@armansretunedgarage thank you.
Ganyan din ang sasakyan ko sir low power, may fuel suction valve ba din ba ang dmax 2004 4jh1 ang makina.
Need ma check EGR at injection pump
Pera na chief pagkataos
Tama lang pambili ng bigas.
Boss taga davao pud ko asa sa davao imung shop,naa koy mux 2015
@@carloerasmo1132
Home service mechanic ko karon Sir.
09150875574
Unsai cause kasagaran sa fuel knock boss kng CRDI?
SCVs, Mass airflow sensor, fuel rail pressure sensor
Parehas ba ang scv ng dmax and mux 2015 matic?
@@MoesZumba yes po
Sir arman pila torque nm sa fuel rail flare nut isuzu dmax.. kato sa common rail sir??
29Nm or 22ft.lb
@@armansretunedgarage parehas ra sir ang 14mm ug sa 19mm nga flare nut??
Salamat sir
Taga asa ka sir? 2016 Isuzu mux user mi
Davao city po Ako Sir
Ano kaya problima sir okay naman linya ng fuel galing sa tank patungo high pressure pump pero kailangan pang bumbahin para umandar tapos kong patayin mo naman tapos paandarin ayaw naman umandar kailangan pang e pump
Possible defective itong Suction control valve...
Or maybe
One of Injectors may problem. Malakas return flow
Sir san po kayo kumukuha ng scv sa isuzu rin po na mismo?😊
Yes Sir best sa ISUZU dealership
Sir ano po sanhi ung matagal mag engage ang reverss
Possible Transmission reverse solenoid defective or need rebuild transmission
Sir my pick up ba jn n worth 300k
Maghahanap tayo
sir possible ba cause is scv pag nag lolow power sya pag 100kph then no check engine l
Anu po engine model?
Pa check turbocharger output and fuel system suction control valve
@@armansretunedgarage nissan navara idol d23 2018 model
Paano malaman kun sira yun scv
1. SCAN Diagnosis with Data parameters reading (SCV performance) actual rail pressure reading
2. Actual valve Operation testing ( 12 voltage supply)
3. Solenoid Resistance reading (2 - 2.5 ohms
Toyota innova nag rerepair ba kayo
Boss arman dili mka scan ang foxwell 634 sa isuzu 2022?
Maski gi update na boss kay wala upgrade sa laptop…
@@NaScamakochannel
Possible maka read
Quick SCAN
@@NaScamakochannel
Wala pay update sa Bag-o
Ok sir Salamat kaayo..
Boss san ang shop mo?
Davao city po Ako Sir
Bai maayung bei dha pilay voltage sa scv?
ECU controlled voltage - 7-12 volts
Pulse width modulation PWM
Salamt, idol
Bos bgo mo akong subcriber bos anu kaya problema ng 4jj1 bago oberhoul madali naman umandar kaso may fuelnak. Dipa gumana un injector 2
Need to check:
1. Injector wiring
2. Injector nozzle
Salamat bos ako mismo nag overhoul ngaun lang kasi ako nakagawa ng ganiton makina un fuelnak nya sa injector ba
Good pm, Lods kung sa mga Isuzu minitrucks 24v 4hl1/4hk1 Ano dapat ang desired fuel rail pressure sa idle rpm kumpara sa Mux/dmax na 30k to 31k stabled
Maraming Salamat
More Blessings from Holy God
Happy 2023
Same parin po...
@@armansretunedgarage Maraming Salamat sa pagsagot, Lods
Nagka problema kac ung Mini Trak na Dina drive bigla ko Bigla Humina, Nag check engine tapos ok naman Max 4k rpm muna kaya tinigil ko, wala kac dala scanner. Pero pagkalipas 2 hours sa byahe bigla bagsak na yung Rpm to 3k max Rpm, unti unting bumaba rpm naging max 2.5k max rpm tapos ung huling Andar 2.3k Max rpm then bagsak to 2.1k max rpm, kaya stop na ko paggamit, Lods
Hirap pala hanapin sira nyan kung mumurahin scanner, ano kaya naging sira nyan, Lods Maari kaya ung scv humina na pressure, Easy engine start naman at hinde mausok, Biglang low power at unti unting bumababa na max rpm
Anlau kac area ko, at nag try lang ako order fuel rail sensor, try ko pinalitan pero same pa rin 2.3k max rpm pa rin, ginamitan ko multi tester ung brand new fuel rail 0.5ohms lang sya parang factory defect
Na tester ko kac resistanced ung pinagpalitan fuel rail sensor umaabot na 11ohms, Normal lang ba ung 0.5ohms resistanced sa brand new fuel rail for 4hk1/Navarra
Salamat Muli
@@norwindaveramirez6089
If may exhaust filter possible barado napo
@@armansretunedgarage Exhaust Filter, Lods
yun ba yung Dpd filter, pinatanggal na kac un, pero hinde pa deleted Egr at dpd
Pero napansin ko meron syang Engine exhaust Brake, Lods parang may baso connected sa tubo ilalim dpd filter
Huling katanungan, Lods
Normal ba ung 0.5ohms resistanced sa brand new fuel rail solenoid Sensor
Hanggang sa Muli, Lods
Maraming salamat sa Lahat ng mga petmalu na Diy Tutz
@@norwindaveramirez6089
SCV 8.5 po
Boss sa navara naman low power sya nagpalit na ako ng fuel filter dalawa po tsaka nag change oil tas nag egr cleaning napo ako ganon parin low power
Ok naman po yung boost nya tas nagpalit napo ako bago turbo boss..sana ma notice
Pa check po actual boost pressure and fuel rail pressure baka mahina.
Magkano boss Ang singilan paganyan
2000- 3500
Boss..unsay model sa imong scanner..salamat
@@augdozdaguplo8362 foxwell nt644
Mag ka anu kaya ya presyo ..nyan..salamat
wala lageh spacer iyaha boss? man
2010 to 2020 model no need na spacers
@@armansretunedgarage salamat.boss man Amping perme salmat sa imong pag share og idea mga ing ana Godbless u po
ua-cam.com/video/17q3K1IsYvY/v-deo.html
Sir san location nyo
Davao city
Sir arman bakit palagi masira ang scv ano cause nya.kasi nagpalit na ako ng scv after 3months bumalik naman ang sakit nya na namamatay.ty sir
Baka iba na naman po cause sa trouble?
@@armansretunedgarage sir sa estemate mo ano pa ang cause nya bakit ganun parin sir
@@geoffreygindap5577 Kulang sa fuel system maintenance.
Madumi at contaminated fuel
Hindi langing magpalit ng fuel filter
Thanks sir
Sir good day po ung pumbas sa scanner ng mechanic sa dmax 2007 ko is P1094 pinalitan na namin ang suction valve control tapos.. hindi parin na solve. Ano po ang problem ng sasakyan ko? Slmat po
Condition for Setting the DTC
FRP Regulator Commanded High DTC
• The ECM detects that the FRP regulator commanded fuel flow is more than a predetermined range for longer than 10 seconds when the engine speed is near idle speed.
Fuel Pressure Drop DTC
• The ECM detects that the fuel rail pressure is dropped more than a threshold when the commanded fuel is cut.
@@armansretunedgarage Sir Arman ano dapat palitan or linisin pag DTC P1094 &P1093?
@@armansretunedgarage ibig sabihin sir need kong palitan ang fuel rail pressure sensor ko?
@@bonifaciozamorajr.8753 Ano updates dito, Boss
Nagpalit ka fuel rail sensor
Umayos ba Car mo
Nc infos
@@norwindaveramirez6089 hindi pa po ako nakaka palit sir.. inuna ko muna ang 2 fuel injector.. sira din kasi..
Naistastart ko naman po.. kaso yung nga lng.. nag iispray ako ng gasolina sa intake hose.. para po bang priming..
Isuzu P0661 code?
ua-cam.com/video/7QFNZ-I6p0c/v-deo.html
Swirl control valve problem or wiring.
@@armansretunedgarage where is swirl control valve situated on a dteq?
@@BBB-zc6sb
What engine model?
@@armansretunedgarage 2017 d teq
Sir magkano labor sa ganyang trabaho?
2000 to 3500
Salamat sir..
Sir pwdi hingi fb page follow ko po kayo..taga bukidnon diay ko sir..hehe
@@ninopangahin773
Mahal lang parts 7000 to 10000
Magkano lahat gastos pag palit.
Nasa 11k
@@armansretunedgarage maraming salamat sa kalaman god bless
@@armansretunedgarage ask ko lang din sir me leak po don sa front ng makina ng dmax ko 4jj1 engine me idea po ba kayo kung magkano yong gasket at Oring plus labor na din po,ala po ksi ako idea,nabili ko kasi dmax 2nd hand 2008 model.salamat.
@@user-ig3wx9mj2j
Genuine gasket po . Best
@@user-ig3wx9mj2j
1-3k possible
Boss matanung lang Hyundai accent crdi ko po mausok kahit nka idle lang lalo na pag apakan black smoke po Hindi nman nagbawas ng langis wala rin usok sa depstick
Pa check
1. Air filter clogged
2. Dirty mas airflow sensor
3. Defective intake hose
4. Defective Turbo
5. Clogged fuel filter
6. Injector nozzle defective
@@armansretunedgarage Hindi naman low power boss
Clean throttle valve and EGR valve and intake manifold
@@ajsteelfabrication8099
Pag black smoke:
1. Kulang sa hangin
2. Over feed sa fuel