Cnc Machines New Crash Fail Videos Compilation - Programming Errors - Costly Crashes
Вставка
- Опубліковано 29 вер 2024
- Contact us cnc programmer: hamitunlu@hotmail.com
thanks for your support.
/ cncprogrammerr
cnc Programming , cnc Programming Errors
cnc interesting moments , cnc funny moments
nice slide show, where's the video?
at 2:27 eh that shoudnt be possible! g-code limit is preventing toolchanger to move unless the spindle is at the correct height-how the HELL did that happen?!??!?
maybe the toolchange had a fault and the operator manually crashed it?
Or they put the machine in full manual mode. Then those things can happen.
Не всегда. Я однажды тоже сломал захват инструмента. На станке не было блокировки перемещений.
@@SSFproductions1 our full manual password is super heavily protected.
Could be an electrical failure causing the machine to think that the tool changer was homed when it was in mid swing. I'm not sure how it registers but it's probably not as well designed as the actual machining parts.
Who was the skeleton waiting to be found lol
He was our dearest operator.Loved by bosses but hated by their colleagues. RIP.
Yo momma.
Place that I was working at until a week ago had an automated saw. Idiot running it ignored the signs that the blade was going blunt and didn't change it or slow it down. The blade went shattered into a dozen bits with a serious boom. The guard thst covers the blade was so entirely bent out of shape that the next day the floor supervisor completely rebuilt it and we come inthat afternoon to a different guard with welds on the outside and fresh paint on it.
as a machinist why am i watching this
Make yourself feel better about when you crash.
점 하나 잘못 입력 하면 사고납니다~
girls at 1:36 can use my tool, very cute!
0.24🤣🤣😂😂
1:56 LOOOOOL
Poor Steve. He was consumed by his work.
As someone that pays for his own equipment, this made me cry harder than Schindler's list.
02:54 who can relate?
Got a brand new skimmer... left it up for the weekend. Not fun.
Watched a fair few do it and done it myself more than once, Got scared cause I had a puddle under me, then realized it wasn't my machine, never heard a more sincere "GOD DAMNIT" up until that day.
this is coolant, and worker probably forgot he's refilling it ;)
just like here for instance:
/watch?v=XY6OnaIdP58
@@calkazdwalx3392 not unknown to see the coolant running slow and it's a blocked filter or ball valve turned down and they go to refill it and it's full. The automated saw I used to use had a little flow control knob I didn't understand at first and I almost didn't check the level before refilling. The damn thing was a half inch off overflowing.
just hope that nobody got hurt..... these machines dont stop just because a person get in between
I've had my share of crashes, but never to the extent of some of these.
stopped immediately Idon't think so
These make me feel better about my crashes lol... I nose dived a drill into my set up part, but it stopped luckily before it caused serious damage... like turret falling off 🤣
garbage in crash out
Not a video; with shocking music.
Boo hoo
I like some techno and dub yet the audio ruins this video,
Please the Video without Music
Music was worse than any cnc crash.
most scary bassdrop ever
Yayyyyyyyy ! A slideshow ! The good ol' days !!
The force is just unreal
About the drill that destroyed the CRT screen... I have a slightly used complete control system that I am willing to part with, cheaply! It is an identical Autocon control panel. The Chevalier Bed Mill was in storage for years while in litigation with the machine distributor. Finally, I replaced all with another control system. Turned out that they did not know how to program the firmware properly. $200 plus shipping. Please reply if wanted.
el
Not a matter of if you'll crash but when. Comes with the territory
Never seen a turret actually falling of after a crash.
무섭다...
ببللابلابال
I am an od Ginder and we have Walters and they have caught on fire three time,from operator error ,pretty crazy seeing it in real life.
This makes me feel better. The other day, I was trying to touch off a depth on my ID, and I accidentally used the External instead of Absolute and sent her 8 inches at 100% into the chuck. New chuck, new jaws, new tool, and she's good as new. Kia lathes suck ass though.
uses a touch probe. or touch to face z0.0 we never touch touch z down in the part itself
This hidious music makes me give this video a thumg down.... :(
Last voiceover made me laugh
헐~~
what the...
kick ass video bro !!!!!!!!!
Nice 👍 fails 😜
I find the original version of this song, but not the version used in this video.
Fatcat Slim - Broken reggea.
Imagine all the crashes that were never caught on video
Many of them were even featured here, since so much of this was just still photos of the aftermath. :)
@@BrooksMoses most in china never see the light of day.
حواث الماكينات